Pro Trail Tire Change!

[@robh3267]

I've been using the Tusk 4mm thick tubes at 8-9 lbs of pressure for a few years now and have never had a pinch flat and that's riding from rocky and rooted forest trails to dessert terrain, they are quite heavy as far as weight but it's worth the extra protection.

[@kenso.1]

thanks for going slower and providing the little details. i miss a lot of that detail in the IG posts where youre reminiscing about the old days and chopping it up with your guest visitor while simultaneously and effortlessly dismounting and remounting a tire in 3mins...

[@dirtbiketv1]

Glad it was helpful!

[@mschumaker1]

That tire stand is a game changer. Heavy duty, wide feet for bracing yourself, proper height...

[@rapscallion3421]

The man the myth the legend! Makes it look so painless everytime. Another great video 👍

[@okcmoparguy724]

Jay I'm going to make one of your tire stands. Only change is I'll be installing some female concrete anchors and bolting the stand down when in use. Thanks for sharing all your experience with the community, you're a great teacher!

[@chetwinkles5051]

Thanks. I watched the video when I was struggling with a rear on my 450. You saved my afternoon.

[@dirtbiketv1]

So glad it helped!

[@firffighter]

Another fantastic video Jay. Used your technique last tire change and worked like a charm! MotoZ Uber tubes for the past 5 or so years with gummy hybrid rear at about 8lbs and awesome traction results for Pacific Northwest riding.

[@miro_s]

you advise to put some baby powder in the tire. what’s your view of the advice to grease the inner tube? doesn’t entirely make sense to me, because grease can be sticky…

[@Madtigertv]

Trials tires been used here for years too. Best for roots and rock in the ugly.

[@miro_s]

Thanks! Following your advice I managed to stop my 100% record of pinched tubes failure while attempting tire changes 😅😂😂

[@williamdumont912]

THANK YOU JAY ! i had the nut on the valve stem right up against the rim and i tore the valve out now i understand why !

[@scoop3894]

D-803 is incredible. Great in all kinds of terrain, and as Jay said surprisingly good in sand. You look at it and think there's no way it works for a dirt bike but it does.

[@ZoranVasicMiki]

What a complete legend you are just by offering those designs like that :)

[@samcssolutions]

Keep the tire change videos coming. I have had to change 4 tires in the last 48 hours, thanks to your instructional videos things are getting a little easier. Thanks!

[@callmewes5121]

Not sure why I love these tire install videos. I watch them all the time. You'd think I'd be better at installing mine 😂

[@db1988]

So glad I seen u mention the nut against the cap I would so this guys come back say I left it loose and I'd explain why and they still want it tight

[@mschumaker1]

Great video but comment at 12:25 when he says he doesn't want to scratch the rim.... too late for that! Good tip on the nut at the end, last flat I got happened that way, tore valve stem off the tube cuz it was too tight

[@spencerclark2269]

The Tire changing master hard at work with the inside tips

[@stankrieger3598]

You make this look so easy, I guess it is my time for shop do or die time lol and I love how you start your valve stim

[@mr.channel6467]

Almost sounded like the like and subscribe bell. 3:40 lol 👌

[@mikebressette6291]

Don't see you do many rims with duel rim locks? I put 2 rim locks on all my bikes rims( may not feel it in the dirt but makes balancing a lot easer for dual sport.so I do it on dirt bikes also.) , makes mounting tires a little more difficult.

[@m3hsid10]

Thank you Jay and Rado! Your content has been extremely helpful to me!! God bless you both!

[@willmcgregor7184]

You make it look easy. Thanks for the tips.

[@robertwoods2505]

You rock Jay! Thank you for sharing your tire changing skills with us.

[@davea9502]

Thank you for the tire changing stand info!

[@2aamendaz608]

Hey buddy send tne design info on the tire stand. Fyi I have chop saw for metal and a mig welder or the fancy shmansy tig!! Keep the great 80's hairbands rockin!!!

[@dirtbiketv1]

Cool-- email me-- link in my about here or on my IG go to my bio-- thanks!

[@TheBraveheart55]

This was a very good video with a lot of good close ups!!!!

[@shaunwiegert]

Thanks for the great video. Just dropped you an email. I have 5 dirt bike tires to change from 14" rears to 21" fronts for a cr85, kdx80 and a ttr225. Having the stand to assist with all my changes will help.

[@3BrothersExtreme]

Love trials tires for hard enduro and steep rock faces I might need to throw some on the 65s

[@davea9502]

Great instructional video! Thanks!

[@zrbsrbija]

Great video i like your style Grandpaaaa.... ( dont feel bad im 56 and have 7 grandsons)

[@nicnadu0515]

Great video but I just can not get my tire started onto the rim

[@beverlyboys73]

Great info. Thanks

[@Gabe_Colon]

Yup pinched my tube while putting the tire on

[@94SexyStang]

If you're getting beat up, you're doing it wrong!.....it's technique, go slow....but yes you usually get beat up the 1st time, and get the feel for it.

[@jr.6199]

Thank you Grandpa Jay! Would like to see you compare Mousse versus Tubeliss etc durability and install vid if you ever go there. Keep these topics coming for us.

[@jamesonkruger6989]

I'm really struggling. This goes nothing like this for me. Not even close. When the rimlock is opposite the valve where do I want to finish? It won't go on because the rimlock

[@dirtbiketv1]

Email me for video showing that.

[@johnmcarlisle]

Another great video. Thanks

[@dirtbiketv1]

Glad you enjoyed it

[@mtemowersports]

What if you don't use rim locks? My tires are wide and I have deep rims so the beadbuddy don't work.

[@dirtbiketv1]

Email Jay with any questions. Contact info in About tab.

[@tullyburman3217]

Where’s the grinder jay

[@verdonrocksphotography3510]

cool idea w extra tube, Rado don't forget to practice..... stay strong, cheers V!

[@dirtbiketv1]

That's the plan!

[@redball4093]

Very good, thank you

[@prw7016]

Awesome video.

[@rico900rr78]

Bruh, love the channel. Keep it coming fellas

[@dirtbiketv1]

Thanks! Will do!

[@ryanlongshore8168]

Would you recommend this double tube method on an adventure bike? i.e. an africa twin?

[@catlinmccluskey621]

Awsome video. I usually have to change 3 a summer and they always take longer than that lol

[@drolexvlogs3705]

what is that cracking sound when installing the bead using that lever?

[@namodio12]

Can I get the plans for that tire changer, please????

[@dirtbiketv1]

Email Jay. Contact info in About tab.

[@TheCarlejoseph]

I won't change tires without a stand anymore. Great video with great tips.

[@dirtbiketv1]

Right on

[@rosskite6240]

Keen as on the drawings for that stand, what's the email address?

[@dirtbiketv1]

in my profile here on YT go to contact -- or my instagram has it as well-

[@smauller623]

What core remover is that? Have the motion pro one but it’s easy to lose lol

[@robsonenduro3316]

so do you carry that stand on trail ???

[@armadilllo]

pros always make it look easy

[@jimzigouris]

hi there,i be watching you long time now. a question in 1.25 minute you use a tool for the tyre valve,where i can buy one of those? thank you

[@dirtbiketv1]

Napa or online amazon. Valve puller tool.

[@jimzigouris]

@@dirtbiketv1 hi Thank you for the quick response I hope they send to Greece 🇬🇷 I live a little bit far lol

[@norton218]

I've always heard that trials tires don't brake very well on step loose downhills where you really need both brakes and high speeds. What's your experience.?

[@dirtbiketv1]

when trail riding that we do any lack of braking is not crucial- -if racing be different.

[@fuellifetv2934]

What size is the new tyre please

[@wei-liyu3293]

Hi, thanks for sharing. Could you please advise where should I mail for the drawing details? Thank you.

[@dirtbiketv1]

You can email me off my contact in my youtube bio -- or from my website or my instagram all have links-

[@wei-liyu3293]

@@dirtbiketv1 thank you!

[@Andy-co6pn]

Work smarter not harder

[@anonymous_friend]

Yamaha dealer wanted $350 labor to change 2 tires! Crazy!

[@lanceg.8458]

Which air chuck adapter is that? The blue unit looks nice.

[@dirtbiketv1]

Motion Pro makes that one-

[@neildickson4897]

the rim reaper

[@Colorado-Tinkering]

Firing up my welder in three, two, one … Just kidding, I can’t weld. Will bribe my neighbor to weld it for me.

[@dirtbiketv1]

email for the drawings if you have not yet--

[@nickbryan4434]

Who do I email for the tire changer email?

[@MrBeracah]

What is your email address please as I would like to build the tyre stand.Great video thanks

[@dirtbiketv1]

Don't want bots all over to have it-- Go to contact on my channel or my links on IG-- or google my name and MX and can find my site with contact- not hard--

[@sboyle8850]

No one on KZbin show tips and tricks on how to do the 21” front tire. Definitely much harder than a 18” rear like everyone shows how to do.

[@justaguy4788]

"trail tire change" I thought he meant tire change on the trail, until he said use a stand.

[@dirtbiketv1]

Haha. No tires changes on the trail.

[@LifeWideOpen780]

How do we message u for the plans

[@robh3267]

Send him an email, address is [e-mail].

[@martinfretwell]

I dont scratch rim lol

[@blakecouch]

He changes a tire without breaking a sweat. I lose a finger and break a window...

[@greaseball13]

What is the diameter of the axle rod on your stand? Looks to fit every wheel I've seen a video of you do. Is there any you have come across that had to small diameter bearing to fit? Planning to make a stand that clamps into my regular tire machine.

[@dirtbiketv1]

Yes - email me for the tire stand drawings and more info on sizing.

[@goldlinemedia967]

Tire stand drawings section is blank on your website???