Replacement Parts Every Civilian Should Own | How to Maintain your Rifle & Handgun for Emergencies

[@fearlessleader8623]

The great part about upgrading your firearms is that you inevitably end up with spare parts

[@thepioneer6178]

In some cases, spare guns too lol

[@theKashConnoisseur]

TFW you have a spare charging handle, and so you build out a completely new rifle to go along with it.

[@HvacGuy76]

So true! I bet most of us could build a gun out of spare parts.

[@thatbme35]

​@@HvacGuy76 Twice over😂

[@calvins4084]

Exactly.. All I need is a 9-volt battery and some tubular nylon and I've got my next AR

[@welderdude1]

For sewing kit use a carpet needle with needle nose pliars and heavy duty nylon thread. Sewing isn't hard and everyone should know how to do it.

[@TUKByV1]

Sail Rite has a hand tool that you may find interesting.

[@urielmartinez2161]

Yeap

[@ClickClack_Bam]

Agreed. Last year I came across a tool called a "Speedy Stitcher Aul". You load the needle in it & use it to stitch just about anything. It's 1 knot that you need to know & it works for pretty much EVERYTHING. It looks nice too. I've fixed my lunchbox, my wallet, pants etc. I used to see that as like a women's thing but being able to just know that 1 knot & the tool makes it easy to do, it changed my mind.

[@TUKByV1]

@@ClickClack_Bam I just got one. I got some scrap strap for practice. I also want to see if I can run Dyneema thread through it.

[@The_Dungeon_Smith]

I use a set of leather sewing needles. You can make sewing needles out of bed springs though.

[@KyleKalevra]

Sewing is an incredibly important survival skill far too many men lack.

[@Jordan-ce7sf]

Agreed. In Navy boot camp we sewed with dental floss. Readily available and extremely strong.

[@marshallbrumfield]

Sewing and also knowing how to apply sutures

[@KyleKalevra]

@@Jordan-ce7sf Excellent suggestion. Hadn’t heard of that. I’ll have to give it a try. I can see how waxed, nylon thread could probably be pretty useful, especially in wet environments. 👍🏼👍🏼 I’m a fan of fishing line and the thread inside of 550 because they’re in all of my bags and kit. Along with some small needles I keep a couple different upholstery needles in there as well for heavier or larger jobs like canvas or multiple layers of nylon webbing. I know a thimble and needle threader certainly aren’t a necessity, but keep those in my kit as well. They weigh near nothing and are really, really nice to have on those tough jobs.

[@KyleKalevra]

@@marshallbrumfield Absolutely. Being honest, I think medical training is more important than tactical training. Don’t get me wrong, both are vitally important skills to have. But most of us aren’t door kickers or infantry. In real life I’ve used my first aid and TCCC knowledge far more than I’ve ever had to use any of my fighting knowledge. I’ve never once pulled or pointed a firearm at another human. But I have stopped numerous bleeds, applied 3 tournaments, packed wounds, and had 2 people who were beyond help pass with me trying to help save them. As a civilian. At work. Every day life. 100% agree, sir.

[@thejohnhend]

I told my wife she’s very lucky lady because her man can sew and bench 225. lol

[@laurenceb5516]

"Its gonna be a good year" was a heck of a statement to hear 6 days in lol

[@user-nm7ru9nf9h]

I go the "one is none, two is one" route. I actually take that further with 5 pistols of the same make and model. One or two can be a parts cadaver or given out as needed for your team or group. Sames mags holsters etc. I have several different makes and models but focus on the group armament. Just bought a Canik METE SFT Pro...if I had only known, Caniks would have been my team/group pistol. May transition to those, maybe. Lived in Kalifornia, Caniks were "off roster", moved to the free state of Tennessee! LOVE IT HERE! Everyone tells me to have a blessed day, and they let me merge into traffic LOL!

[@bobcrankshaw1909]

As an Oregonian, or as you know we call ourselves, Oregunian’s… you are on point with staying ahead of the power curve with prepping and stashing the necessities we will need to maintain and defend our families and communities. Thank you!

[@ThePerpetualStudent]

You are going to lose your guns, sadly.

[@D-LineReviews]

@@ThePerpetualStudentya Americans don’t stand because they don’t wanna loose what comfort they have left but that’ll be the case continuously loosing them until the guns are gone then they loose it all….. and the just vote harder crap ain’t gonna do it

[@ThePerpetualStudent]

@@D-LineReviews Fully agreed, on all accounts.

[@D-LineReviews]

@@ThePerpetualStudent what we need to do is stop watching the symptoms and look for the root cause…. Who let’s go back to the beginning of gun countrol and look at all funders and politicians everyone involved and look at their background and see if a pattern emerges …..

[@welderdude1]

I'm the armorer for my MAG so I have extras of everything. The BCM gas rings and extractor kits. All of my rifles have spare complete bolts with cam pins and firing pins in the grips.

[@breckfreeride]

Cotter pin too!

[@welderdude1]

@@breckfreeride correct. For my hard use rifles I have the enhanced KNS Precision retaining pins. For my piston rifles I don't need gas rings so that means I have a bunch for my 2 DI rigs. A lot of people don't think about servicing their tools and should really do so.

[@eriklambert3809]

POF roller cam pins for everything

[@welderdude1]

@@eriklambert3809 I run those in all of my piston rigs. They hold up well.

[@TUKByV1]

@@welderdude1 How do the KNS pins differ from the other design? Do they install and uninstall the same?

[@WOLVERINE95899]

I think a critical item would be firing pins, detents, and springs. There are pre made "oops kits" for when you are doing a full cleaning/disassembly and you lose something. Also, entire bolt assemblies if you have the money for rifles.

[@PoliticallyInsensitive]

An oops kit isn't a bad idea since it had all the small pieces but just an extra trigger/hammer spring, extractor and spring, and some gas rings are really all you need. Those are the parts that are most likely to wear out. Unless you're changing take down pins or grips on a regular basis there's not much chance of losing a detent.

[@buffewo6386]

I know Aero used to make such an "oops" kit, but I haven't seen their's for a long time. So... Does anyone have suggestions for premade kits?

[@TheVerminator92]

@@buffewo6386aero still makes them they are on Midwest industries site

[@theKashConnoisseur]

I remember the first time I loosened the castle nut on my buffer tube, and found out the hard way that there was a spring loaded detent in there just begging to go flying. That marked my interest in small parts kits for AR platform rifles. I think that if you lack the money for a full spare rifle, a spare bolt assembly is a must-have part. You might be able to get away with using an AR like a bolt action if the buffer springs fail, but if you FUBAR the firing pin, there's not a lot you can do to get the gun back in service without a spare.

[@TUKByV1]

I buy detents and springs in packs of 5 now and again. You can amass a LOT of them in a year's time and they take up almost no space.

[@ireilly2000]

great video! another benefit of stocking small parts- you have the replacement when you need it, not a week later when you find someone to deliver it to you. just like food storage, you dont have to go crazy, but bringing the store to you is a wise idea, even in normal times.

[@dirty-civilian]

Amen.

[@CreedOnix422]

The positivity and education I get from this channel is on another level! I would rather watch hours of Dirty Civ, than anything on. Netflix.

[@af22raptor23503]

Great Video! Just a couple of pointers from an old timer that has been shooting for over 40 years. The Spare Parts kits are a GREAT IDEA and Everyone that own any firearm should have Consumables in hand at all times. I know that many people say that the Geissele 42 Buffer Spring is the best but at over 42 dollars and a life cycle of less than 6k rounds there is NO MAJOR advantage over a Wolff Spring 16500 Extra Power at 14 dollars and just keep 3 of them with you that will take you to over 12K rounds in a 10.5-11.5 or nearly 20k rounds if you have a 16 inch barrel gun and Wolff are allot easier to get than the Geissele are most of the time. One of the first things that I change on any AR BCG that I purchase no matter the brand are the Gas Rings with the MCFARLAND STYLE 1 PIECE GAS RING which is normally good for over 25-30K rounds in a 16 inch and 15-20K rounds in a 10.5-11.5 w/Suppressor. The McFarland is also more robust to keep in a baggy in your rifle case and I normally keep a Spare Bolt w/McFarland Ring and Firing pin in the Magpul Grip MOE Plus that I normally equipped my AR with. I am a BIG FAN of Dual Fuel Lights that way I can use rechargeable and CR123 so my weapon lights are always ready. The Fix Sticks are one of the best inventions since Sliced Bread but the Universal Torque unit that you showed in the video has a HIGHER Margin or ERROR than the Specific Torque units and I found that out the hard way with a Holosun 507c and Glock 41 MOS that had to have the screw carefully drilled out so ever since then I have been buying the specific Torque Limiter for my application and right now I am covered from 10 inch/Lbs-65 Inch/Lbs in 5 inch/Lbs at 30-40 dollars per it is cheap insurance. I also follow the same philosophy with my pistols as I do with my rifles and since normally I am carrying either a Glock 20, 21, 22, 23, 35, or 41, SIG P220, 226 or 229 or 1911 I have allot of Parts Interchangeability between my carry pistols so if something was to happen I always have spare parts but I am from the old school I keep enough spare parts on hand to service the majority of my firearms at any one time.

[@Puddin127]

ONCE AGAIN making vids no one else will. This channel is goated and deserves all the support and then some that it gets. Thanks guys, happy new year

[@goncalo1410]

These guys should make some kind of short movie, the editing, story telling and videography are so fun to watch, specially the intros!

[@dirty-civilian]

It’s going to be a good year. 😉

[@NickJonesFilms]

🤔😉

[@goncalo1410]

@@dirty-civilian cant wait man

[@Briathos1]

Hahaha loved the “a’suh dud’

[@Brett235]

Get a few field parts kits and some bolt rebuild kits, all under $20. A couple extra bolts and maybe s few spare charging handles. I also keep a few spare trigger springs and buffers and springs. Its just good practice to keep those spare parts.

[@biggboysouth]

I highly recommend the strike industries flat wire spring, it last longer than the geissele and is advertised to do all the same things for like 1/3rd the cost. I emailed strike years back about the cycle life of the spring and they replied with an insane number that I don't recall but essentially it'd never need to be replaced. Obviously I check my springs from time to time to confirm they're looking good and after a few thousand rounds it still looks like new.

[@iamcondescending]

One thing I'm glad I got into is paracord weaving. I've made so much stuff with paracord, including all but two of the slings on our long guns. I have a crap ton of paracord on hand in various lengths and colours, (as well as a wide variety of hardware,) so I'm confident if something from a pouch to a strap broke, I could replace/repair it.

[@tarheelrealist8935]

One is none, two is one...lot's of sage advice in this vid.

[@BattleChemist]

For that last part, the first thing I thought of for all those items was Shock Cord, since unlike 550 cord, it has some give which can be really handy in many of those situations.

[@ExtremelyAverageMan]

Very surprised Shoe Goo wasn't mentioned to keep on hand. One of the best all-around glues for fabric, gear, nylon, shoes, and any other repair where flexibility is needed.

[@angelgarcia4848]

Not a bad idea. How long does it take to cure? Could it be implemented in the field or is it more practical for at home repairs only.

[@ExtremelyAverageMan]

@@angelgarcia4848 it's hard to the touch in about 15-20 minutes with most of its strength as long as you don't glob it on too thick, but recommended is 24 hours for a full cure

[@lewis9888]

After I stockpiled a crap load of shoe goo, several friends told me that it is No Good. Of course I will keep the stockpile of it that I already bought. Keep Prepping my friends.

[@jayonez137]

Stocked up on things long time ago! My bin full of spare parts since I started building AR rifles 14 years ago Bunch of Oops kits Extras BCG’s Few BCM bolts Packs of BCM gas rings Buffer springs Lots of ammo.

[@ameircanrebel]

This is why I love watching Different topics from different videos across KZbin because this one pointed out for things I never even thought about.

[@petesheppard1709]

Thanks! I have over 5000 rds on my Sport II, so it's getting time to think about checking wear parts. Replacing recoil springs on my high-use pistols did clear up cycling problems. This also reminds me of why AR pattern guns are better for bugout...getting parts from IWI for my Tavor is almost a grail search.

[@SLC41071]

You can get really cheap tap and die sets which will allow you to re thread stripped out holes and fix small stripped screws

[@vexelite77]

Everyone is having fun role playing but they always forget to make FRIENDS and share BEFORE bad things happen. If you have money then share it so a guy with SKILLS can give you training because bullets aren’t free. You get my point.

[@dustysavoy6951]

Yep, Windham used to make an excellent parts kit or "oops kit". Glad i was able to grab a few. Sprinco spring kits for extractors. A sprinco recoil spring is a one and done deal, unless you honestly think your rifle is going to approach anywhere near a million+ cycles.

[@effeojnedib7208]

Part of our supplies includes 2 different fabric sewing kits and a leather sewing kit. I even carry some leather stitching and needle in my wallet, along with safety pins, paper clips and paracord. Doesn't take up any space and is always with me.

[@Kypreparedness]

One thing I did years ago was order a bunch of firing pins, ejectors, extractors, cam pins, cam pin retainer pin, roll pins, gas rings, spare BCG, etc and put them in one of those plastic snap boxes similar to a tackle box. I’d like to have a spare bcg for each rifle, couple receiver extensions, castle nuts, etc as well. I mostly run M&P 2.0 now for handguns, and it’s a PIA to find spare parts for them like a RSA

[@dreadnaughttactical]

I try to order extra parts and spare parts kits for every firearm I own if they are available. The day will come when ordering parts for firearms will no longer be an option. If spare parts are available.. I do not hesitate to buy them.. whether they are needed or not. I have springs.. O-rings.. trigger groups.. BCG's and firing pins.. bolts and screws.. extractors.. barrels.. sights.. and even extra after market stocks/grips and accessories. I also try to learn as much about gunsmithing as possible.. and the tools needed to do certain repairs at home.

[@loboloco866]

Excellent , congrats.

[@MetaKorpse]

I send videos like this to my buddy who kits an m1 carbine and hi power. Hi Michael.

[@tinyarms609]

So glad you talked about over tightening. I had jagerwerks do my rmr on my 19 and when I had to change the battery in the rmr I couldn’t get it off. Tried heating up the screws to loosen the locktite and used multiple high end Allen wrenches. Ended up having to send in my slide to another machine shop and get them removed. I honestly don’t use locktite on pistol rmr’s anymore. Like you said if you just torque correctly and mark them, you’re going to be fine.

[@nushinebob]

FYI. Brake cleaner works great and fast for loosening lock tight. Don't know the chemistry, but it works better than heat.

[@dannop2562]

@@nushinebobGonna try this. Appreciated.

[@joshv06]

My main Preventative maintenance parts: Chrome silicone buffer/pistol springs (they go through thousands more cycles than standard) Glock billet ejector Gas rings Spare Glock trigger return spring

[@YerGoodBuddyKeith]

A oops kit in a piece of pluming caped off would be a great addition to my kit. That way i can toss in a extra buffer spring and my current BCG after i upgrade. The dual fuel flashlight isn't talked about enough. That's a great idea that i need to pursue. I already have a small solar charger that's shaped like a brick. It's super convient to keep something on it in the bag and then let it sit and grab more juice when I'm just hanging out around camp.

[@breckfreeride]

The problem with extra parts stashes is they always turn into a new gun

[@dirty-civilian]

This is a real problem. :)

[@GTFBITK]

I have 4 Xtra ARs because of this.

[@50shadesofcerakote]

my parts stashes just disappear...

[@ytty5183]

It is the way. 😂

[@pstuart17]

Yeah, and then you have extra guns to cannibalize parts from if anything breaks. Win-win. Clearly the answer is always more gun. If you have a problem that can't be solved by another gun, you didn't use enough gun. XD

[@accunutoutdoors2717]

Just a couple ideas on emergency gear repairs: nylon is a plastic, so using a lighter to melt frayed/damaged areas can help prevent further damage and/or make repairs to that area more durable. Also if you’re going to tape anything to a firearm you might be better served by a high-temp tape, ideally one that isn’t reflective.

[@vamalu2235]

As a French person, it's cool to see this kind of video because here, few people can make this kind of content because the states in Europe are pretty much in control. And if you make this kind of "alarming" content you can have your weapons taken away or be watched by the authorities.

[@brightargyle8950]

I actually just ordered another spare parts bundle for my rifle, I've almost got enough bits and bobs to build another rifle. Lots of the little parts are stored away or in my range bag, at least 3 of the commonly lost/broken parts. Hopefully more to come in the future. Always good to be prepared.

[@Sophistry0001]

I actually dry fired my handgun enough that the glock striker tip broke off. Luckily I had a spare striker assembly so I didn't miss a beat, and once I put the spare in I had another one shipped to replace the spare. Also, everyone should have a sewing kit. You don't need to be a master seamstress to functionally repair things.

[@dirty-civilian]

Very true!

[@brokenbstring]

Sewing is a skillset all prepared citizens should know. The skies the limit when you know how to sew.

[@Engineeringpreparedness86]

Just when I think you guys have lost your touch, you go and post this fire. Excellent video, boys.

[@ekfinn]

I generally love Geissele products, especially with them being just up the road in Pennsyltucky. I’ve been waffling about the Super 42 spring and buffer system but decided to go A5 with Springco Green. Was thinking of changing one out with a G Super 42 rifle length, and putting a carbine Super 42 with H1 or 2 in my remaining M4 setup. I have to say I’m shocked to see that much permanent deformation from creep and exceeding the modulus of elasticity in that buffer spring after 7,000 rounds. I recently decided to freshen up an old Windham, ME manufactured Bushmaster M4 clone from the early 2000s. I’ve put 12-15k on this rifle, and the original 1:9 barrel can’t hold tighter than 4MOA. I swapped out the Brady-era Commercial diameter tube with a mil-spec PSA (it’s a tube, guys), and the original spring was measuring at new carbine length. Very surprised to see the Super 42 getting tired after 7k.

[@JasonGraves-b4l]

All springs take a “set” or decrease in length over time. I’m not a fanboy, I don’t even own a single Geissele product, but our presenter doesn’t really give a comparison to a “mil-spec” spring in the same gun for the same amount of rounds. Geissele does have a really good video here on the Tubes of You about spring set and their test jig to simulate thousands of cycles and how their braided design holds up compared to “mil-spec” springs. I’d be interested in seeing the Geissele braided, mil-spec, Sprinco, and a captured system all tested.

[@spook283]

i have been into preparedness, since the 70's. i have always made it a priority to have 2 complete replacement bolts for each rifle, along with replacement lower parts.

[@lanejohnson7656]

Although I have a few sets of BCG parts put away I have a complete spare BCG in pretty much every bag as well as lower parts kit in a tin. Added weight and take up space? Yup!! But if gas rings blow out or extractor breaks or something I can slam the spare BCG in much faster…. Top of the line BCG? Nope!!! I bought BCG, Pmag bundles on sale from PSA. Inspected them and tested them in each rifle. They easily pass inspection and work flawless in each rifle.. Would I bet my life on them if my BCG goes down for some reason? Obviously or I wouldn’t have them in my bags. To me it was a great way of having spares and boosting my mag count. Admittedly i do not have a spare buffer spring in bags. I might look into having a few complete buffer tubes as well..

[@cialee1989]

This is why I love owning more than one AR15, all of them are spare parts for each other. While I do have spare parts for most of them, I don't have spare parts for all of them. We had a ban on AR15s and rifles of the like last year in Washington State. They won't even allow us to buy parts. I thought I would have time before the law went into effect, but there was an "emergency clause" built into the law. As soon as the law was signed by our head idiot of state, the law took effect immediately. So no parts other than the ones on hand... which is enough to service 3-4 of my rifles for life. Enough parts 2 of my handguns for life. Not bad, but when we beat these laws in court, I'm definitely going to finish my firearms maintenance stockpile.

[@1611KJV]

Charging handles and complete bolts are great to have, even if you don’t own an AR - for picked up or found weapons.

[@timunderbakke8756]

This was great as a way to spot check the parts plan and reorganize to make sure I’ve got some other things I need.

[@gordonbombay2863]

Perfect! Thank you. Just had this conversation with a couple of my co-workers that were Army. 🇺🇸

[@Terran994]

Real simple. Any pins, any springs, gaskets, firing pin, any part that is polymer and any part that moves inside, like a BCG.

[@ALovelyBunchOfDragonballz]

Grip, stock, buffer end cap, a whole ass Glock frame...... 😂

[@musician445]

Not all springs are made equal, chrome silicon spings such as Sprinco last much longer than milspec, but are more sensitive to corrosion. Colt springs don't last nearly as many cycles, but are highly corrosion resistant. Corrosion will ruin springs, so lube is recommended; even on the large buffer spring in your AR. Grease works best because it doesn't drip off or dry up. So I recommend, use Spinco, and thin gun grease on them. TDP spec length for a carbine action spring is a range of 10 1/8" to 11 1/4" (if i remember right). The springs in cheap AR's will probably already be short/weak when new or will begin to shorten/weaken much quicker (mine did). Expect your extractor, ejector and buffer springs to fail in short order. Replace them with sprinco, bcm, or colt.

[@Spessforce]

I agree with everything, except good CR123s are absolutely NOT a dime a dozen.

[@theKashConnoisseur]

They do make rechargeable CR123s though. After a certain number of charge cycles, they might average to a dime a dozen!

[@wolfgang_h3t]

Compared to most worthwhile batteries they are, especially vs an 18650 lol

[@ashersdad1755]

Great video...rather than buying a bunch of guns i have 4 for myself and a 9mm for my wife. For my AR its just about 3 rifles as ive got a lower and than ive got 3 uppers 1 each in .300 blkout .308 and .556/.223rem with an extra to all removable pcs. On each a 12 gauge a ruger 10/.22 for my boys and my .45 edc. All of which have replacement springs gaskets or fittings replacement hardware and so on all seperated into small baggies labeled and greased firing pins galore for each and while they all have optics ive also got all tge original and a couple of upgraded irons for them. And ammo ammo ammo...I live guns too and would love to buy a new one all the time but id much rather be effective and capable of firing what I already own more.

[@BULLETENVY]

saw a vid where wranglerstar mentioned your channel and glad i checked it out. good so far. like minded thinking.

[@FITFO]

Other thought of the fix it sticks torque driver. If you don’t want to spend $200ish just buy the torque driver alone and use it with your normal 1/4” bit screwdrivers that you Probobly have laying around

[@Punketeria1369]

Great video and quite important. Many of us don't really think about maintenance and the importance of having spare parts, such as extra springs, bolts, pins, and firing pins. As such, I appreciate the video. Especially for ones EDC, as we depend on it. Same with ongoing maintenance. Personally, I always check my firearms Before hitting the range. That way I know all parts are working as needed, and ensures that nothing is loose. Happy 2024 all and stay safe and prepared 👍 chEErs

[@lordfairfaxpreparedness]

Good information! I have already started "building" a repair/maintenance kit for uniforms/gear. I haven't started on firearms stuff yet, then the basic repair kits that have come with fa's I have already purchased (ie; couple screws and an allen wrench). Definitely going to look into parts and parts kits and have applied to SDI for the gunsmithing certification.

[@RAIDER8388]

It's gonna get wild boys.

[@charlieghague]

Check out the Speedy Stitcher. It's extremely simple to use and will work on any piece of nylon you have. Use some bonded nylon thread and you're good to go. No sewing experience needed.

[@doc-t-8648]

for rifle I would also have at least 1 extra barrel and a way to change it. Maybe we dont see SHTF scenario til way down the road and now you're entering SHTF with a barrel with 1/3 of its life left. I keep 2 Barrels, 2 BCGs, 2 LPKs, and 2 oops kits (the ones with extra springs and detents). Good call on the springs and SOPMOD kits definitely going to get a few of those.

[@ALovelyBunchOfDragonballz]

2/3 of its life is still 10,000 rounds. I wouldn't fret too much about wearing out a barrel like that.

[@griseonemo8047]

Always check the shelf life of your batteries. Some keep longer than others. I have had issues with Duracell and some other lesser known battery brands corroding in their boxes in less than a year. Look for batteries that have a least a 10 year shelf life.

[@loboloco866]

Yeah you are right, same problem here.

[@PersonalTrainerLamar]

"Rotate"

[@archangel20031]

I own 2 of every gun so I can keep at least 1 running, and as for the AR-15's, I already got gas rings, and a few of every spring and clip in a waterproof clam shell kit.The AR-15.s and AR=10's have spare batteries in the stock, and the AK has them in contact lens cases with the gun. Also, there will be a lot of people that don't make it long enough to empty their first magazine, they will be a great parts supply!

[@arlissyoung8899]

I like external piston guns for this very reason, no gas rings to worry about and far les cleaning. Downside is big replacement parts like BCG. They tend to cost more and can be harder to get. Other small part are mostly the same, firing pin, springs and the likes. There's no trail and error when running a Can. if it happens not to cycle just one click and your back in the game.

[@ALovelyBunchOfDragonballz]

You do the same with an internal piston gun, with less weight, are an abundance of parts, _and_ external pistols aren't really any cleaner. Suppressed guns are just dirtier*

[@arlissyoung8899]

@@ALovelyBunchOfDragonballz I respectfully disagree. I own a number of both. External piston guns BCGs are way cleaner after any number of rounds through them. Suppressed external are still way cleaner but do have more then not [bolt face only]. PWS has their external guns way down in weight 6 - 7 lbs. Some are much heavier as I have 3 Sigs one a 308 and it's a tank. Part wise internal are mostly copy cat guns and parts are much easier to source and for the most part cheaper in price. If you run a external gun for any lenght of time it's very easy to see in either Suppressed or unsuppressed. The ease of adjustment when suppressed is just a click of the piston if even needed. IMO it doesn't make external far superior / much better but they do a advantage in running cleaning and suppressed.

[@ALovelyBunchOfDragonballz]

@@arlissyoung8899 so the click adjustment isnt for external pistols, its for _PWS specifically_ . EP guns are notorious for being overpasses, greatest example is the 416, and that just has to do with timing and potential gas leakage. My internal piston is click adjustable through my gas block. Look, we're learning that one part of a gun isnt always inherent on other parts of that gun. Most EPs arent suppressor friendly, and some IPs are. Hell, the second most recognizable EP gun voids its warranty with a silencer, so there's that. Uhh if they were copy cat guns they wouldn't have different actions. _Some_ external pistol ARs use a lot of IP components, however the vast majority of EP guns do not. Dont try to argue weight, IP wins every time.

[@project86xero]

I have spare parts for all my rifles. Springs, firing pins, gas tubes, gas rings, extractors, bcg's, bolts, etc. It's actually one of the boxes I have staged to grab, if time allows, in a bug out situation.

[@AVH8TOR]

Good video man it’s always good to have these talks every once in a while

[@Braekker19]

It’s funny, I actually started to put together a list of backup parts for my AR. Extractor springs, gas rings, etc. I recently got an enhanced buffer spring as part of my list. Like anything in this field- one step at a time.

[@lunarnightshift2465]

My dad: "This year will quiet" Me, adding more ammo to my shopping cart: "Let's hope so"

[@musicman1eanda]

This makes me think about seeing if I can replace my RMR with another dot. Needing to remove the optic to change the battery, followed by loctiting the screws, waiting 24 hours, then needing a range trip to rezero, isn't very dependable. Problem is my slide was milled for the RMR type 2 with irons just forward of the dot, and my slide may not accept the new RMR design that juts forward more but allows you to change batteries.

[@theKashConnoisseur]

The Holosun 407c/507c red dots also fit the RMR footprint, and have side loading batteries that don't require a re-zero every time. The solar failsafe is also a pretty cool feature and helps extend the battery life. But if you're allergic to Chinese-made optics, the Trijicon SRO has a top loading battery similar to the Deltapoint Pro, while still fitting the RMR footprint.

[@musicman1eanda]

@theKashConnoisseur I'm double checking the site of ATEI who did my slide milling. I think it's possible that still no other optic will fit my slide because I got the "pro cut" option back then. The pro cut required me sending in my RMR too so it fits completely snug. If the 407/507 are even a millimeter longer they won't fit my slide even if the screw holes are in the right place.

[@theKashConnoisseur]

@@musicman1eanda That is fair. FWIW I got a CHPWS mounting plate to fit my 407c X2 to my Sig cut for a DPP footprint, and the Holosun optic has a little play in the mounting plate until it's screwed down. But I'm not sure if that amount of play translates to the RMR "pro cut" option. Once I swapped to a Deltapoint Pro, the DPP optic cut on the slide was EXTREMELY snug.

[@ALovelyBunchOfDragonballz]

If you can't verify zero once a year I think you need to keep a better calendar.

[@musicman1eanda]

@ALovelyBunchOfDragonballz I do rezero my gun every year. I'm saying in some sort of SHTF type of scenario you probably just need all your equipment to work as is.

[@supfoo3638]

Torque driver is the most important tool imo I used to over tighten everything and have completely ruined a couple guns cuz of it

[@TimothyLipinski]

Great Video ! My Maxpedition 17 inch laptop bag I fitted with a Rifle Gun Sling to use as a shoulder strap with the snap links. The shoulder strap can also be used as a waist belt when I use the stowed shoulder straps of the laptop bag ! Already have the CR123 batteries for the 18650 batteries... But Olight wants to sell 21700 batteries in their NEW rechargeable flashlights ! Also now have extra charge cables for the Olight... Keep UP the good work ! tjl

[@hudik96]

Zip ties and duckt tape is by definition the opposite to preventative maintenance.. it is an emergency repair

[@theKashConnoisseur]

Temporary repairs tend to become permanent fixtures.

[@ConMan1504]

Not always. Having cords retained or similar can prevent you from having to replace them when they get snagged and broken

[@Darkhorse_Visuals]

best dudes on the internet really love what you guys do and put out for the community. thank you!

[@seanlloyd9424]

Watching this video today was helpful. An awesome reminder. So many things you mentioned are common sense items I intended to get a while back. Im a little annoyed that I put it on the back burner and failed to do so, until today. Thanks man!

[@kylebeckman1398]

Also firing pin. My brother's bent on his AR while we were shooting. I run a SCAR 16 so fewer parts breaking on these reliable rifles. Even so, I have an extra titanium firing pin, bolt, and some springs just in case.

[@davidli3582]

You can get 18650 batteries from reputable brands like Samsung and LG for like $5 each currently. I'm treating them like semidisposable batteries since they barely cost more than CR123s.

[@ethanarias2911]

Carry a supply of the smaller bits and the appropriate tools to replace them but also carry an entire BCG with you for when you need to get the rifle up and running immediately, you can figure out the broken one later, hopefully.

[@dtomamerican3471]

No one talks about these kind of things a lot. I've already implemented some of your thinking in regards to this....still need to work on it more

[@daviddrago9360]

Lpk, buffer spring, bolt and all I need for disassembly, even the barrel if need be. Venture surplus 👍 def has good gear!

[@noexcuses6727]

old Gunny here - learned a few new things here. Never considered the recoil spring. Thanks

[@robbentodd6824]

I would add shock cord of varying weight to your list of things to have on hand. I get mine from REI and it’s been very useful around the house and when I was traveling. And if you can, get a spool of 1000 pound nylon (hollow). When I was in the AF I would scavenge the scraps instead of throwing it away after use. It’s been very useful at home!

[@thepioneer6178]

Love that optic setup

[@EvanCurtiss]

Another incredible video that helps us be forward thinking individuals. Loved the shorter 14 minute format as well. Thank You!

[@_astralxinfluenced_2799]

I've snapped 2 different strikers on my G22 by dry-firing, beware (both strikers were just a couple hundred rounds of live-fire). Not sure if they were junk strikers or what, but I've since upgraded to a billet stainless (I think), & use dummy primer rounds to mitigate that. After some research, seems plenty others have had the same issue with dry-fire snapping the tip of the striker off.

[@benasby1449]

Love that Ballistic Advantage BCG! ♠️

[@sleeperno1215]

I carry a full spare bolt carrier group that I know is functional on my vest in a PVC tube for my AR15. If I have a persistent malfunction in the field, the problem is statistically likely to be in the bolt carrier group somewhere. Do I really want to be trying to fish apart the BCG in the field? No, I pull the BCG and replace it with one I know to be functional. I can fix the other one later when people are not shooting at me.

[@Cynical1800]

This is the video I’ve been waiting for

[@rangervapes571]

Great content, I would also include parts that get lost aka bolt carrier pins, ejector springs, M-Lok screw & T-nut etc.

[@brianfischer5609]

One thing you could do is buy a lower build kit from PSA, and spare quality BCG, and you have most of the extra parts you could ever need.

[@johnmerz1968]

Excellent information. Worth the watch.

[@Swamp_Shenanigans]

I used to want a safe full of different types of guns but here recently I’ve got a little wiser with my money(it’s tight) I’d rather have one great AR($1,200-1,800) with a duty grade optic/light/sling and suppressor and a duty hand gun set up and ready to go with the equipment to fix/maintain it a couple time over than a bunch of cheap rifle and pistols with cheap lights and sights. Guns are not my only hobby so saving money for them makes it more enjoyable. Camping/hunting and other useful skills.

[@2woLetters]

Learned new information to maintain my rifle, thank you for this video.

[@ericdavis1660]

This kid gives me great hope for the future.

[@ALovelyBunchOfDragonballz]

On the plus side, if everything was cut off right now i bet really no one has enough ammo to break their rifles. However, defects and accidents happen so having some spart small parts for your, or an aquaintences, rifle is never a bad thing. You might not like giving a less prepared person your stuff, but two rifles on your side is better than one.

[@johnth172]

I always have backups parts atleast 2 of every lower and upper parts kits.

[@bradsimpson8724]

I stopped buying(and actually sold a lot of) firearms years ago. Now, I spend money on stockpiling ammunition, collecting parts, and going to a couple of training courses a year. I shoot more, I'm more familiar with my equipment, and as a result of those two things, I shoot way better.

[@scrapyardprospecting3855]

I keep a complete kit for the purpose of parts or total rebuild. Tel extra. Barrels. With bolt pins n stuff. And the tools to do It with

[@marshallbrumfield]

Informative video! Learned some new things. I see that Celsius too. Orange is my fav flavor.

[@Cerberus-Training]

Another great video guys! Quality content and entertaining! Glad to see people promoting training

[@gunsngearchannel]

Dudes, the opening was by far the funniest hahaha. Great video and great content. Keep it up fellas

[@dirty-civilian]

Appreciate it!

[@dannysmith9217]

Dude, you're a great salesman. Good video. I've got the rifle parts. Glock neglect will be addressed next.

[@JoshAnderson-jr6wx]

A bolt rebuild kit is pretty cheap for ar rifles and comes with all moving components to replace.

[@welderdude1]

My main carrier is a Shellback Tactical Rampage. It works well.

[@raywells2858]

excellent forward thinking video!