Disassembling Chrysler's 62TE Underdrive Compounder Assembly

[@michaelowino]

I like this gentleman. Very calm, very elaborate that even a layman can grasp this info. There is something about old men. Experience. I've learnt alot from him this day. Thanks.

[@codgamervidz]

for the sun gear snap ring it’s actually very simple (having done hundreds) i take a thin straight pick and get behind the ring near the split. then i use a thin 45/45 pick and use it to lift the ring out while rotating the ring and it pops right up

[@MikeM-tt5fl]

Very informative and helpful video. Thank You very much. Special thanks for very understandable language. It was easy to understand even with my English second language.

[@metamorphicorder]

You have to take the piston out of the direct cluch under compression. If you remove the snap ring without compression the spring will unspring rather quickly. Also in the low clutch when you put the top snap ring in to hold it all in you have to make sure the gap in the ring isnt within the area where the windows are in the low clutch drum. If you do it wrong this can cause the drum to, well come apart. We call it grenading. Its a fairly newly discovered problem.

[@krischu3718]

Amazing details. I am troubleshooting my error codes P0732 (gear 2 incorrect ratio), P0735 (gear 5 incorrect ratio), and P0792 (ISS sensor) the transmission whine also. I am thinking to buy a complete compounder assembly & swap it. Since I am there I will probably change the solenoid packs & TCC. Any help or advise is much appreciated it.

[@rayrushforth6390]

yes, this mans presentation is excellent - he mentions that the preload of the main drive gear bearing has caused whining problems - not enough preload or too much??? I have a whining problem with my 05 T&C that only occurs over 45 MPH

[@rhensonsr]

Do you have the part number for the bonded rubber piston at time stamp 11:31?

[@rayrushforth6390]

I am trying to find out what engages the torque converter lock up clutch - I have watched many videos but not one completely explains what solenoid engages the direct drive clutch

[@d3vind3vin20]

Great video many thanks!!!

[@rayrushforth6390]

I wonder what is more common - too much preload or not enough - of course , too much may ruin the bearings - true ?

[@DIESELMAN8V92]

excellent video thank you!!!

[@rayrushforth6390]

I have owned six T&C 2001 to 2005 - I love em all I never had ann issue with a whining sound untill my most recently aquired 2005 T&C - - it whines over 45MPH and tends to be an irratant - any clues anyone???

[@BehzadEghtesad]

really american cars are far away from 1970s merican. advanced bad quality material under a capitalisem system worst than chinese. this tranny 80% have same issues in all the years

[@d-s-ll2378]