Disassembling/Modifying a ZT 0393 GLCF (With a few surprises!!!)

A disassembly that goes just a bit wrong a couple of times.
If you enjoy these videos and want to see more, please support us on Patreon at / sliceydicey Thanks in advance.
Go to Knifejoy NOW by clicking knifejoy.com?aff=37 and every dollar you spend will help support the channel!
Check out Southern Edge Knifeworks at www.southernedgeknifeworks.com and use the code SDSEK at checkout for 15% off AND free shipping!
Make sure to visit White Mountain Knives at www.whitemountainknives.com and get your discount by using the code SDWMK at checkout!
Visit Southern Edge Knifeworks at www.southernedgeknifeworks.com and use the code SDSEK at checkout to get 15% off AND free shipping in CONUS! $15 for anywhere else!
www.amazon.com/hz/wishlist/ls…
Check me out on Instagram @sliceydicey75 and Facebook at / sliceydicey75
Email me at [e-mail]
#sliceydicey #knifereview #edc

[@justonemoreknaf]

Lol I’ve crawled around on my floor looking for T6 and 8 to many times. I’m starting to get a nice knife graveyard (sadly) so I have the screws I lose/ drunkenly strip. Thanks for the Slicey disassemble the Shabazz would be proud.

[@1130jawz]

Sadly I too have marred a screw on a pretty expensive knife due to the intoxication effect!

[@paulmartinez9908]

I wish you could do a video of your entire collection, organized however you’d like..love your videos man!

[@SliceyDicey]

I’ve done a bunch. I usually do it over the holidays.

[@nicholascoulter3760]

@@SliceyDicey This whole thing is looking to be a bit longer than a holiday so maybe do it anyway? Any content you put out will be consumed by everyone at home for the next decade.

[@SliceyDicey]

@@nicholascoulter3760 True...

[@jackattackv2]

Just picked one up and am hype for it! Nice video 👍

[@i6am6the6thorn]

That clip definitely looks way better. I changed the scales on mine but need to change the clip. As much as I want a deep carry for it, that Hinderer clip is sharp! 🤘🏻🍻

[@orendz7740]

I hope ya make more disassemble vids man. I enjoy these types of vids. Thanks man for the good content. 🤙🏽

[@grimreaper6042]

Brain thanks for the soldering iron tip I am sure it will be helpful in the future And that hinderer clip really made the knife pop

[@BurninOG]

Great disassembly video. I have the same knife with the MXG clip. They make a small plate that goes with the deep carry clip to fit properly.

[@SliceyDicey]

Yeah I had one on my old 0393SW. Just forgot.

[@2adave]

We all made it!! I hope 🤞🏼

[@patrickvanovermeeren4513]

Enjoyed the video, like the clip change 👍👍😊

[@TheOutlaws9295]

I love that knife I have the blue titanium and two tone blade I put hindere hardware on it and found some glow carbon scales discontinued so I got a few bucks in it

[@justinbelcher3679]

That clip looks a lot better

[@jshphysicistatyahoo]

Nice knife, didn't know it glowed however! BTW, you rock, Brian.

[@XrayMike17plus1]

Picked up one of these 2 months ago. Just something about this ZT that scratches an itch. BTW, charging the scales at bed time (ten-ish) allows them to glow for hours - until sunrise lights up the room. In daylight they seem to fade quickly but not in the dark.

[@jimw.1877]

you had me at "well poopie" fantastic knife though, good job brother

[@blackhawkninjabeast]

The only issue with mine is it has so much lock bar tension and such a strong detent that my fingers get tired if I repeatedly flip it.... which is what I like to do haha

[@wasawasablingbling]

I want this color pattern but the old textured G10 overlay. I own two blue 0393s but I can’t bring myself to buy a third for a Frankenstein blade

[@justinbelcher3679]

"Bastage" you've been watching Johnny Dangerously.lmao🤣🤣🤣🤣 Great and funny movie.

[@jamienelson5438]

Been looking for a 0393SW, just can't swallow the price just for the glow in the dark. Great video! Stay safe.

[@SliceyDicey]

They are on sale right now.

[@jamienelson5438]

Slicey Dicey who has them in stock? Can’t find one. Be great if you can point me in the right direction. Thanks!!

[@SliceyDicey]

Jamie Nelson www.bladehq.com/item--Zero-Tolerance-Hinderer-0393GLCF--94068

[@jamienelson5438]

@@SliceyDicey oh yea I was looking for the SW version. But at that price hmmm lol. Thanks so much

[@ntag411]

The ball bearings appear to lessen the need for the side plates to squeeze/keep the blade centered while minimizing side play. Blade flicking should be easier/faster than washers. Pricey feature and well suited for this knife IMO.

[@Keith_the_knife_freak]

You said it was the FedEx guy at the door. 🤣🤣🤣🤣🤣🤣🤣🤣 thanks for the shout out.. 😅😅😅😅

[@jerrymillett3895]

Thanks

[@jacksonperocfrenchzfourtou4283]

even whith the might on we saw tem changing color

[@LIE4ME]

You should try Lemon Twist's Strawberry Crush Lemonade in your vape. Let me find out you have a vape channel since 2015 with 350 videos and 300k subscribers Slicey. You better not have a closet that looks like a mini vape shop.

[@SliceyDicey]

I use the plainest stuff I can get. Tsunami Tobacco. I just want my nicotine. I don't want flavors or odors.

[@antoinedoinell]

you didn't even spine whack it!

[@SliceyDicey]

No. Because that’s dumb.