Disaster Strikes AGAIN!! It Could Have Been Terrible!!!!

A suspension part broke during install!!! I'm done with cheap chinese junk!!! It's gonna get somebody killed one of these days.
Check out the second channel!!
/ @thisnthatgarageextry
Check out my merch!!
thisnthatgarage.myspreadshop....
Facebook: / thisnthatgarage
Send me stuff!!
This N That Garage
PO Box 489
Pleasant View, TN 37146

[@robinpfeiffer6088]

What I really like about this show is you follow the notion that you explain things so that everyone can understand. Good job troop.

[@scottmmagby7057]

Enjoyed seeing little miss Daisy, Glad to see she is doing well!!

[@robertchryssikos1006]

Hello my friend I hope you’re having a good day I hope you’re knees are feeling better love seeing your videos

[@rickydonahue1586]

Ready for an hours worth of enjoyment!!👍👍😁

[@timrohan5407]

Hi my friend, I'm battling cancer/radiation bs and your videos relax me, I enjoy them a lot. Please take good care. Thanks again again! Tim from Kentucky Kentucky

[@robinpfeiffer6088]

Good luck on your treatment, I have CLL and understand...this is a great show, unless Mike gets on his rants on how the problem is Avery, Blair, etc, instead of himself. Lincoln needs a bark collar. God's speed on your recovery.

[@adamcarfield7201]

I can't wait to see the final product I've loved watching the videos on the 40

[@MrTalkRadio]

Tremendous amount of work, add in videography, editing and uploading. Those that know give a nod, those that don't give thumbs down and useless negative comments. They all have an opportunity to start their own channel and see what its like.

[@byrdsdoityourselfgarage7330]

Man! It’s good that happened in the shop, and not on the tour!!! But that is terrible… all that work you put into it :( I’m sorry brother

[@ThisNThatGarage]

Could have been bad!

[@johnalexander4356]

You need to get a Diablo brand metal cutting blade for your skill saw and the cutoff saw. You'll love the way they cut and the speed of the cuts. I was shocked at how good they work.

[@MattsRageFitGarage]

I bought a diablo blade for my circular saw and was extremely surprised how it went through a 2X6 3 times faster than a 80's sears kromedge blade that was new in the package still.

[@ronaldbrown7780]

That bracket breaking like that could 😳 have just saved your life.

[@dmindi1773]

Chineseum craftsmanship at its finest! Everything else looks great. Your getting so close, looking forward to seeing it driving again!

[@babaninja9043]

You get a lot more done when you don’t have to lay on your belly like a snake. That lift is a blessing.

[@joes6295]

Chad, I'm amazed by your resilience and patience, maybe you're just stubborn. You tackle some of the most difficult tasks with basic tools and figure it out. Don't burn yourself out by rushing to get Dude ready for the power tour. Good work man.

[@natedillard7353]

Don’t be so hard on yourself bud . The car is coming around well! You’ll get it all figured out …

[@JS-kd7jf]

Glad to see that storm spared your shop, sad that it tore up what it did where it did hit/ touchdown. I think you can FABRICATE JUST ABOUT ANYTHING! HOPE YOUR MOM HAD A GREAT MOTHER'S DAY!! TA-DA, TAKE CARE!!

[@Darylatlarge]

Hey friend we are all human . Great to see you …

[@corydriver7634]

Sure glad that bar didn’t break on the road somewhere. Stay safe, see yah!

[@terrytye6497]

The anticipation is getting to me bad but that’s how it goes. Can’t hardly wait till next week but it also gives us something to look forward too. Love that 40 and she’s worth the wait.

[@rudyrivera7426]

Wow! Chad! You have really sacrifice a lot of your time to bring us quality videos thank you and keep it up, sir! 👌👍

[@johnd21]

Don’t give up on the old girl. Stuff happens like that now days . Quality is not what it used to be. Hope you figure something out. Good luck!

[@terrystines2536]

Chad you need to come up with some Back Yard Butcherery merch !!!

[@kbschulze]

Always great to see the work you are doing. No one wants to receive a defective part, it pretty much ends any trust in the supplier/manufacturer.

[@jonathanmiddleton1141]

Awesome video Chad. Glade you wasn’t driving down the road when that thing broke!!!

[@MultiKelly85]

Gonna tell ya right now, that is ONE SEXY RAKE ON THAT CAR!! Your car has the stance I WILL HAVE on my 53 F100 Ford pick up. Some carsand trucks can pull off a front end rake and ours do it FLAWLESSLY!!! Your father would be PROUD to see the love you spent on his car. I pray my dad sees the same on our first vehicle we ever built together. I am taking a ton of knowledge from this hannel to build what we would have wanted. I'm here, and I will watch the next 20 episodes if it's with this car. I'm happy. I am learning more then you are teaching. You need a permanent TV show or something along those lines.

[@ThisNThatGarage]

Good luck with the truck! 👍

[@harrywalker968]

@@ThisNThatGarage could you of used the spring eye for the track rod mount.

[@harrywalker968]

@@ThisNThatGarage here in aus. what your doin, would cost 15k +, in engineering feeeee,s... certified boiler maker welder. no rust. barrier for tank. brake & swerve testing..ect, ect,. plate 1 ft long, welded to chassis for brkt. not cut to suit.. & engineered..

[@harrywalker968]

@@ThisNThatGarage shocks are adjustable. just wind them up..

[@harrywalker968]

@@ThisNThatGarage d.o.m. tube.

[@SeanPwnery]

I generally try to mount my rear calipers around the 9-10 o’clock position drivers side and 2-3 o’clock passenger. The way I visualize it is the rotor turning down into the pads in forward motion so when the brakes squeeze that rotor, it’ll force the rear of the car to “squat” and help dig in the rear. Up front, opposite concept (3 driver’s, 9 passenger’s) so the front will not “dive” the nose and keep the front end biasing slightly upward - the combination of both fights to keep the car as level as possible to the road under hard braking. Got the idea after working on various BMW’s over the years and theirs are generally setup like that. I know these comments come after-the-fact when you’ve already done your fab work but I thought I’d share the concept with you and others in case you all find it useful.

[@codywade1171]

I’m glad you made it through the tornado I knew it was close to your house! My house and cars was hit with hell damage. You are couple towns down the road from me.

[@ronaldvanhorn9558]

The old 40 is coming along great. Looking forward to seeing the finished product! Just a thought, have you thought about painting the floor pan, Because rust never sleeps! I know that knee gives you pain, I know about pain. Maybe see a doctor about it, he could possibly help you! Anyway , God bless you!

[@Minisaud]

Worth looking at threaded rose joints for the ends of those bars.

[@VintageTinGarage]

Keep going, you’ll get it done

[@tonyrichardson5325]

I can't wait to see you on power tour. I'll be there myself. I can't wait to shake your hand man.

[@BillHilly169]

Man that’s scary!! Better breaking now than when you’re humming down the road.

[@Hbzprojects]

Really looking forward to next week.

[@abelardocastillo6683]

We didn't have all that fancy stuff early on ,we had a lot of string. And a tape measure. Where were you when we were young.

[@davidcolesr.8628]

Well Helllloooo Missss Daisy !!! Good to See You Pup.

[@davidwitts3887]

Thanks for the great video. I am glad you found that faulty bar end then and not when you were out on the road. It is unfortunate that some stuff from China is so poor as to be dangerous. In my job (electronics) we are slowly moving away from Chinese manufacture and going with local manufacture.

[@mikemadison2747]

Yes! Dude! Really cool truck. And probably a good call not using those rods. Ice those knees down, and keep up the good work.

[@francoisbouchard602]

Nice job Nice GM good show 👏👏👏👏👍👍👍👍😃

[@BillyBob-uc9zp]

Get some bronze bushings turned up using the plastic ones as templates, plus splat some more weld on them rod ends = problem solved?. Well done Mr 😎

[@matttalbot4942]

In rigging classes back into the 1990’s, we were cautioned about using any Chy-knees hardware. Their metallurgy is sub-standard and does not give signs of impending failure…….which is just fancy talk that the metal is brittle…..and doesn’t deform before failing. One thing that may be contributing to that particular failure may be the sharp threads. A small crack will propagate through the system to lead to a catastrophic failure.

[@surindersandhi3924]

Hi My Dear Friend Very Very Great Job ❤❤❤❤❤

[@roberthocking9138]

Thank goodness you found issue now and not on the road.

[@JerryHaney-hf9oe]

Keep up the great work and I saw you picture on the tornado and just glade it didn’t hit you or your shop you have worked so hard on.

[@lancemeads9551]

At least it broke before you got on the road.😮

[@jonathanmiddleton1141]

I’ve already watched every “extry” video you have, Chad. It’s been a while since you uploaded one.

[@kirk467]

Yeah, we had a tornadoes here in Louisiana too Chad, not far from my home! Bad wind and rain that day, it was so bad that it got dark during the day and the security lights came on it was so dark! Looked pretty serious too! We survived though! Just saying my friend!

[@jimrobin98]

You know--that doing everything twice maybe a blessing! It could be a way of making sure it is right! Keep up the videos, as I am learning some interesting things!

[@ThisNThatGarage]

I must be blessed a lot then!!

[@AZVIDS]

Bummer Chad! I know you will figure something out👍

[@billbudd99]

Chad , you are too much 😂 Ya been sniffing too much of that blue China paint 😂 just kidding, ya doing a great job! Glad y’all survived the tornado 🌪️ blessing 🙏

[@shawnlowell4522]

Another gooden ! Keep pushing ,you got it!

[@robertrainey8136]

One good thing you’re gonna know this car like the back of your hand

[@waltalbright]

Enjoyed the picture show

[@Thomas-fo9zu]

It's a shame all the junk they sell out there. Even the brake pads I've bought from the auto parts store need to be filed or ground just to fit right! Thank God you caught that now! I hate to think...

[@user-bh8hz8bv2n]

lots a work for one man!

[@brianwalker1868]

Not worth the risk be glad it broke now then later when your away

[@kirk467]

I think you need to put a gusset on top of the square tubing to brace it, Chad! Right where you cut it off my friend! Just by looking brother!

[@jimmymiller7568]

Master fabricator, indeed sir!!!

[@billywhite3020]

Another great video

[@rhondasweeney7271]

Wonderful, Miss Daisy ❤️ You are right. Your life is worth more. You can say your knees hurt. I know exactly how you do. Keep safe, and thank you for sharing. Keep up the great videos!!!!😊

[@astravanmk2]

Good grief! That would have been bad out on the road.

[@LittleRedsGarage]

This is my favorite channel, keep up the great work, cant wait to see the 40 riding low and slow and be safe out there with all the chinesium parts!

[@ronaldbrown7780]

Another Great Video Thx Chad

[@user-dw2is4ej5m]

I'll be waiting

[@paulmurphy5964]

Excellent

[@kirk467]

Thanks for sharing Chad, hopefully you’ll get things sorted out brother! Good luck brother, prayers sent! 🙏🏻🙏🏻🙏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👌🏻👍🏻👍🏻🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🙋🏼✌🏻✌🏻

[@charlielowe5258]

Awesome 👍

[@kirk467]

Looks good Chad, should solve the problem brother! Clearance! 👌🏻👍🏻👍🏻

[@leighfleming2075]

It’s back yard butchery not make a death trap show. Enjoy all your videos. Please keep up the awesomeness you do. Thank you for sharing. Would like to see you put a link for that four bar link someplace so your views could back you and boycott them

[@jamesweems5301]

Look you got to buckle down and getter done!!!! lol Do you!! Hope to see videos from power tour

[@laurensmith1828]

The 4 link is a good thing to know and yes you should put a link to reference it in the future.btw im putting one in my 41.im chopping the top at the moment.

[@anthonyblacker8471]

Holy smokes on the incident towards the end.. Wow Chad I can't believe that sheered off like that.. I don't want to give anything away, but man it sure is a good thing that happened while you were moving it around and not while you were going 60 miles an hour!! Wow

[@baxojayz]

This build is really testing your patience! I hope the next week brings you better luck.

[@jangles1839]

Chad I know I've probably said too much here in the comments but, I promise this is the last one. Why don't you take a little break from the ol' '40 and work on Dude for a bit and knock out some of the things he's needing? I'm sure if you're like me, you don't like leaving something half finished but, it might help with your sanity just a tad! Whatever you're doing, we're loyal and enjoy whatever you choose to bring us each week! Much love & God bless! ~ Scott 💙🙏🏻

[@philiphereford5657]

Great video as always. Thank you.

[@jerrymurphy6673]

Thank you on another good video thank you

[@taurota1554]

Awesome and outstanding content as always.Thanks for sharing and taking us along

[@michealcollier]

Brother, I have the same problem God bless you hang in there

[@michealcollier]

Are you doing OK my friend

[@michealcollier]

I don’t know you, but I respect you

[@garybrady9531]

C notch the edge of the frame to clear the coil overs

[@donscarborough1951]

Great Video Chad...

[@kenpenry6597]

Good job Chad

[@richardbates2367]

Awesome Chad sir you will have disc brakes on all 4 corners of the sporty 40 so it ought to stop really good...

[@davidwebb7624]

I always enjoy your videos 👍🏻

[@Geoff321]

I don't understand why the brackets would come painted.Considering you have to grind them to wild anyways. Should just come bare metal

[@rickybell2.056]

They would rust , them parts could sit around for years before being sold and used ,

[@scottmmagby7057]

Hey Mr Chad. No matter what goes wrong with this project you just keep pluggin' away. I Highly respect that. You figure out the problem and fix it!! I got faith in you Mr Chad, Enjoy ed the video Oh and by the way over here in northern Arkansas we have them bad old tornadoes , I am very scared of them myself!!

[@gravy2819]

More progress! You even at least mentioned the Firebird! Still patiently waiting for a video on her my man…

[@briang4470]

Cheaply made auto parts are becoming a serious issue, especially over the past few years. Lately i bought a set of aftermarket ball joints that completely stripped out before hitting the recommend torque spec, it was absolutely ridiculous, one time i even bought a set of U bolts that said right on the back of the box what their specific torque spec was and they also stripped out at half of the torque that they called for, i ended up getting a used set from the junkyard instead. A ton of other parts have been defective or totally broken right out of the box and modern day rubber and plastic components seem to only lats a few months before dry rotting and cracking. Nothing is made with quality or pride anymore.

[@LarryCruson-wf8pu]

We got faith in you Chad you will get everything done and it will be done right Larry and Sandy

[@johnbanner7073]

Thoroughly enjoyed this video, learned a lot

[@garyinman5400]

Chad what I think about every time I see another piece of junk that is new break is that I do not know what the car meeting me or passing me has holding it together. Sad that this happened to you with you on a time crunch. good luck getting those rides ready, and God be with you.

[@walterrobbins4470]

Hooray! You didn’t explode

[@richardcobb2852]

Looking good Chad, Watching and learning here. I’m glad you have that wildfire lift, that’s a game changer. While I’m welding, I keep a spray bottle handy, in case of something catching fire. The one I use also has a little dish soap in it for a leak tester. 👍👍

[@daviddamico4288]

You did a great job chad ,on the rearend sorry for your misfortune…

[@johnnymack8442]

I don't think I ever used a press for wheel studs myself. So that makes 2 of us lol

[@adulaney2004]

Don't give up, Chad! Definitely lucky that MLS hit when it did- instead of while you were going down the highway! Just a thought, what about making new arms out of c-channel, similar to what comes from the "factory." That way, any flex is distributed across the entirety of the part instead of "failure testing" the connection points.

[@ianlulham]

Everyone likes a challenge.....just keep telling yourself that, your problems will disappear, honest

[@jangles1839]

Hey hey y'all! As usual, I pray that everyone is doing well and having a wonderful week!

[@wisemjk9813]

Iam concernd about the safety of your vehicle 🎉

[@tedhague3814]

You will get it on time I've got faith in you sir.

[@ConRodsAndRustedBods]

Could I make a simple request? Would love to see a video(even if it’s on your second channel) about the T/A. Every time you talk about it I get more and more intrigued by it. It would be neat to see a walk around of it and the history about the car. I’ve got a soft spot for F-body cars.

[@jmr1970]

Chad, I am old fart that ❤ what you do on your show. My thoughts on your top bars. Make new ones using Heim joints 5/8 or 3/4 in size…

[@AndrewHCann]

Excellent video Chad :) also some parts do have points on them and seen too ! But at least did break when driveing could had big problems then ! Hopefully hear what happens later on to and doing excellent work too!