Discover the Fast and Easy e.max and Zirconia micro layering method [ Quick And Great Results ]

Discover the Fast And Easy Results Dental Technician Training you will discover the new easy of e.max layering.
I am showing an advanced E.max layering technique using zirconia crowns fabricated with a micro layering technique to get Fast And Easy Results. I am using E.max porcelain different translucencies and mamelon powders. In this digital smile design file with a facial cutback, I will reduce worktime and increase efficiency and aesthetics.
Minimum layered Zirconia with e.max porcelain can look opaque, and I am showing how to make a natural-looking micro layered zirconia crown. In discover the new easy I am using two special 3shape smile design libraries I created to eliminate shrinkage of ceramic units and to optimize the efficiency in layering without compromising aesthetics.
Discover the new easy is part of the Masterclass series for Dental Technician Training about micro layering zirconia onto Zirconia, or E.max crowns with a digital facial or dentine cutback.
The purpose is to create life-like dental restorations with minimum effort. I am showing different methods of preparing the core, what rubber wheels to use, how to do the wash bake for optimum Fast And Easy Results, how to layer the crowns from easy to complex. Furthermore, I will show concepts of contouring and texturizing the crowns using a verity of burs and rubber wheels.
I am using E.Max Ceram and Glaze by Ivoclar: www.ivoclarviv...
I am using burs and rubber wheels from Aesthetic-Press: www.apdental.net/
I have no financial affiliations with Ivoclar Vivadent or Aesthetic-Press
If you like this video, subscribe to my channel hit the notification bell for future updates.
Follow me on:
Twitter: / masterdentalte1
Instagram: / masterdentaltechnician
Facebook: / karsten.klimmek.39
Linkedin: / karstenklimmek
You have a lot of options and next time when you decide to like a video and subscribe to a channel think of mine as well :)
Patreon: patreon.com/MasterDentalTechnician
Music by: www.bensound.c...
Royalty-Free Music Certificate
License certificate #2223389

[@masterdentaltechnician1914]

More Videos Like This Here: kzbin.info/aero/PL0nY7oSWLTR3fAYQUhaqFl9nHongUJZiC

[@tertiustheron5933]

Thank you so much for the show, been a lab tech for many years, about to go digital done E-Max since 2010, very much like your layering.

[@masterdentaltechnician1914]

Thank you very much!

[@bretoner2]

Glad I came upon this. One of the most clear tutorials I've come across in porcelain applications

[@masterdentaltechnician1914]

Glad to hear. Please share with your friends. I am working on a contouring video series.

[@bretoner2]

@@masterdentaltechnician1914 looking forward to it!

[@ceramlab605]

Thank you for teaching complex layering in an understandable way. You helped me a great deal.

[@masterdentaltechnician1914]

Thank you. Please watch the contour video. It might be good for you.

[@rafaeltambor2594]

Thank you for sharing. excellent class. God bless you. Greetings from Brazilians.

[@masterdentaltechnician1914]

I am glad you liked it. Please share with others 🙏

[@yousefibrahim5240]

Thank you sir 😊

[@masterdentaltechnician1914]

You are welcome

[@montykot]

Great video, thank you for sharing !

[@masterdentaltechnician1914]

Thank you! ☺️😊

[@HS-jq4go]

Good technique! Thanks for sharing!

[@masterdentaltechnician1914]

Thank you HS

[@nskaqua640]

Very useful for my build up technique! Thank you

[@markkim4042]

Stunning !

[@masterdentaltechnician1914]

I am glad you liked the video 😄

[@mbalaga1]

thank you sir. really use full for all technician. i am looking forward your more videos.

[@masterdentaltechnician1914]

Thank you Balaga for the nice feedback. Is there anything specific you would like to see?

[@mbalaga1]

@@masterdentaltechnician1914 thank you sir, if possible i would like to know the hollywood smile in your view and i want to know how exactly we can transfer the occlusion in 3 shape for upper implant full arch.

[@masterdentaltechnician1914]

Good, comment. I will make a video about it. It is actually very easy, but difficult to explain in the comment section.

[@rsh84100]

Thank you for nice demonstration!

[@masterdentaltechnician1914]

Thank you for the comment. I am glad you liked the video and was able to help you.

[@emrebahadr7833]

Thank you so much, very helpful.

[@masterdentaltechnician1914]

Thank you

[@ahmedmashalysaid8116]

More than perfect

[@masterdentaltechnician1914]

Thank you

[@govindarajjeyaraman9418]

Great sir it was very useful to me

[@masterdentaltechnician1914]

Thank you!

[@AETOSSS100]

BIG THANK YOU! NEW SUBSCRIBER

[@masterdentaltechnician1914]

Thank you! Welcome to my channel 👍🙏😀

[@stnln2180]

Same here 👏

[@masterdentaltechnician1914]

@stnln2180 thank you. I hope you enjoy the channel

[@baycas]

At 8:58 you talk about the use of water, but I'd like to know what's recommended in this case. Thanks a lot for your time and videos which are very clear and informative.

[@masterdentaltechnician1914]

You are welcome. Water makes it more difficult to keep the porcelain in place.

[@danielhernandez-tc8bt]

thank you, it was very informative looking forward to your upcoming video.

[@masterdentaltechnician1914]

Thank you for the great comment!

[@dongdongdong8413]

Thank you

[@masterdentaltechnician1914]

You are welcome!

[@rrshse6704]

Nice work, greetings from Canada.

[@masterdentaltechnician1914]

Thank you

[@lagiacrus999]

nice video sir but where is the end product?

[@masterdentaltechnician1914]

Thank you. The end product can be seen in the contouring video

[@masterdentaltechnician1914]

It can be seen in the contouring video

[@RSY666]

Thank you, great information 👍🏻

[@masterdentaltechnician1914]

Glad it was helpful!

[@fouadfakir]

Hi, thanks for sharing... how much thickness we should cut-back ? And I don't see that you're using any dentin, is it because you're working in the enamel area?

[@masterdentaltechnician1914]

Sometimes I use dentine but I mix it 1:1 with Translucent T

[@sayahdz3155]

Top

[@masterdentaltechnician1914]

Thank you. Please share with your friends

[@zokikostadinov3303]

useful but at 7:20 you are talking about mamelons buth those arent mamelons but development lobes they have nothing to do with mamelons...btw its super cool to combine lobes as reflective zone in incizal edge translucent over them and then build mamelons

[@masterdentaltechnician1914]

Good point. You are absolutely correct.

[@victoriabrannagan5891]

Hi fantastic video, I've been on a fewof your courses in Detroit. Do you have diagrams that I can use as reference. Thanks

[@masterdentaltechnician1914]

Thank you.

[@chinjiahau4287]

The emax ceram porcelain can bond with zirconia ? I thought only can bond emax cad or press though. Since the zirconia is high temperature and the ceram is low fusing porcelain, so I thought cannot bond with zirconia.

[@masterdentaltechnician1914]

Great question. Zirconia is a high-temperature material at sintering. After that, you can run it at any temperature you like. Glaze only: 725, bake on Emax ceram 750, bake on vita: 780, re-generation healing after grinding:1000

[@javidaghayarli8252]

Thanks 👍👍👍 More videos 👍

[@masterdentaltechnician1914]

Thank you

[@adimeshort]

Any ideas out there- I use the same technique, stains, MiYO and porcelains but still end up with slightly low value/grey anterior once in the mouth (using more opaque or translucent zirconias)

[@masterdentaltechnician1914]

Have you tried Emax Ceram Power incial or Power Dentine? That will raise the value. Also if your cutback is too heavy and you add too much incisal porcelain it will drop the value. Try not to use too translucent zirconia as a base. That has a low value from the beginning.

[@adimeshort]

@@masterdentaltechnician1914 Yeah I’m using emax ceram- power incisal, OE, etc. I’ll try less cut back and a thinner layer. Thanks! I really enjoy the videos, keep ‘em coming

[@christianlandmann9759]

Hallo, vielen Dank für das Video!! Eine Frage hab ich aber, wo kann man diese Träger bei 11:31 bestellen? :)

[@masterdentaltechnician1914]

At Henry Schein Part# 1876051

[@wafaaali700]

Facial cut back what kind of ingots HT or is it OK to use it on MT

[@masterdentaltechnician1914]

I would use LT or MT

[@arvexmonis8555]

Thank you ❤️❤️❤️❤️

[@masterdentaltechnician1914]

You are welcome

[@Sevo1993]

Hi, thank you for nice video. What is your prefered ivocolor shade on wash firing for A1 A2 shades?

[@masterdentaltechnician1914]

Thank you for the comment. I am using Miyo these days for full contour and wash bakes. Ivovolor is still a great product. For a shades use AD

[@rlibyano]

More details about cut back

[@masterdentaltechnician1914]

What details are you looking for?

[@simonmcgillivray8413]

With the high glazing temp of zirconia what porcelain do you use to add on?

[@masterdentaltechnician1914]

If you are using Miyo or Ivoclar products as shown in the video the high temp is 725 Celsius

[@dr.parthkapadia5010]

Thank you sir. Can u share your insta id