DISGUSTING FUEL ! - Lift Pump Rebuild

[@HootMaRoot]

Well screw youtube they switched off notifications for this channel and a few others and thought it had been a couple weeks since I last seen a video

[@LordMuck]

This is another example of Shadow banning because we are not a bunch of hugging touchy-feely spunk trumpets. Therefore folk should reset their notifications and set to 'All Notifications' Do Well 😎

[@ferrumignis]

I thought Muck had been a bit slack on videos and then found I was unsubscribed, YT really are a bunch of useless tossers.

[@billupstateny9151]

Was nice to see Calamity Kim back with the tools

[@jackhume4532]

Good evening your Lordship, I have thoroughly enjoyed watching this weeks video about how to rebuild the fuel system on the little grey Ferguson and it was really nice to see your glamorous assistant helping you with this task and I would also like to say how much I enjoy seeing those film 🎥 clips as they make me laugh so much. However your videos Mucker are NEVER dull or uninteresting but are really worth taking the time to watch as anyone can learn something new and interesting from them and I for one cannot wait to see the next one and I am really glad that you and your friend Matt(not sure if that’s his name) have decided to restore Matador NUMBER 37 and that will be something that I will enjoy watching and until next time TaRa for a bit.

[@kenmurray4232]

That Ferguson is Minty. I find it interesting the different terms between Britain & Canada, such as the lift pump as you call it, we call it a primary fuel pump. I always learn something watching the channel.

[@LordMuck]

Same here ! it's great finding out different terms and names

[@Jim-Scott]

Especially when you're working from an American service/workshop manual, and some of the terms don't seem to make any sense. But I suppose that's Americans for you!

[@davida.p.9911]

I liked that starting lever on the Fergie I had. I always shouted "Contact!" because it sounded like a WW1 biplane starting. 😄 Excellent work, Lord Muck! She's running like new! 🚜

[@paulthompson8467]

Cool informative video thanks for sharing another wee tractor saved from the scrapman good worthwhile project keep up the good work 👍

[@TemeraireJimny]

Very good. Nice to see you giving the ferguson some love, it's got the making of a solid little worker for round the farm.

[@johnheard2814]

Id have to say the 8100 be for me! I am overjoyed to see the QUEEN back in the works again! Bless her sweet smile! Hope i could be fortunate enough to meet and spend some time with you and her! Keep up the awesome work and video. Yes for sure be on the no. 37!!!

[@Loompius]

You're 100% right. When you're looking for a problem and find one its one of the best feelings haha

[@stuartrance277]

Just can’t wait for the next lord muck video, just keeps getting better & better !👍👍👍

[@fenlandrob6203]

Very nice to seeing you guys again! Also interesting step-by-step overhaul jobs too. Looking forward to seeing the next video soon. Be nice to meet up with you and George. Fenland Rob

[@jonathanparkln8224]

Great vid nice to hear the fergi running sweet , think you should get Kim to go on your day with you and George too 👍😁

[@ianwallett7438]

Good video. Nice to see how a few jobs make so much difference to the old girl. 👍

[@simongriggs4351]

Good to see Kim back love the video very informative as not that great on the spanners Simon

[@mikeduffy7271]

When I was a kid in Ireland we had a TVO 20 and the neighbors had a diesel that engine reminds me of those times thank you for the videos

[@johnangus895]

Welldone Buh you nailed it again ,you know I work away sometimes and when I get home and have done all I have todo I get my old laptop out and love watching your videos and Georges some how they make all this lockdown (and here in Austria we are still in lockdown) a bit more easy to handel so please keep them coming both of you and thankyou for all your time to you take to make are lives a little happyer. John a Suffolk farm boy in Austria

[@LordMuck]

Our pleasure 😉

[@simonbutler6120]

What a great idea you and George have come up with🙂

[@danielshah4247]

Nice to see that wee fergie again, always fancied one as a bit of a project because they’re just so simple. Your videos are consistently interesting and entertaining unlike a lot of content out here. Great video mucker👍

[@scottsaunders3112]

Really enjoyed this film, it must be very satisfying to go through and replace and restore the parts and get that engine to run that sweet.

[@chuckle30]

My mate has a grey fergy it hadn't been going for atleast 10 years he wanted to knock the shed it was in down so pulled it out and got him to pull me up the lane put it in top gear let the clutch off and it fired straight away didn't even change the fuel real nice sounding engine have you watched Clarksons farm it's gone down real well with the farmers I've spoken to around here?

[@casto-]

It’s always made me smile using the gearstick to start our old grey fergy, a key seems boring 🤣. Sounds like a good day out for someone with you, Saunders and the fleet 👍

[@rolnics]

I did wonder why you were using the gear stick to start it! Learn something new every day.

[@kevinwillis9126]

Thanks Kurt cracking vid as always.. Take care sir..

[@LordMuck]

Cheers Kev 👍

[@dave1135]

I like the idea of the starter being on the gesrshift, so many farmers stand beside the tractor to start it like you did, having it so the shifter is in neutral before you can push it forward to start is a great safety idea

[@alexandermckellar4001]

Great stuff , interesting way to start a tractor. We learn something new everyday day.

[@fleyboy99]

so nice to see kim again need more kim time with the lord imself

[@harrysemmence5046]

Little Fergie runs sweet as a nut now, starts so well that one, I have had a few TEF's and some are are a real pig to get going others no bother! Great idea having a day to have a go with some of your kit, looking forward to see how to get in the running.

[@mikeduin8311]

Fergie sounds Sweet as a nut again, lovely throttle response! Quite a bit of Jurassic deposit in that lift pump. Great seeing Kimberly use the adjustable hammer for the intake and exhaust manifold. I'll try and watch some more of George's video's 🤣 Keep up al the great stuff you're doing!

[@gmartin8240]

Great content on the little fergie, nice work on the fuel system. 👌

[@landyboy88]

Great video mucka nice to see Kim back. Look forward to next video 👍🏻

[@jimmybroom]

Great video Kurt. Exciting times ahead!

[@whitestream5233]

Nice little runner , sounds real good . Love the video .

[@trevormansfield6740]

Certainly looking forward to some Matador videos. Lovely things!!

[@jstoecker62]

great information thank you regards from Australia

[@patlydon519]

another lovely video, im actually going though one of these presently, exact same issue, thanks again

[@johannwallette8959]

Always love to see your videos! Keep it up!

[@carlscowen1368]

Old fergie sounds well. Ours has a button on side of gear box you have to press in before you can select start position. Looking forward to seeing matodor vids👍

[@nelsonannett5427]

hard to nic that shifter start tractor thats neat old school stuff. thanks for the great info. cheers guys.

[@AliMackMechanical]

Wee Ferguson sounds a lot better than before. Sounds good to me am quite enjoying watching yourself and George but still waiting on my chip's 😂👍👌

[@stephenjenkins8012]

Lord my man I could watch you all day wish I had your skill I would love to work on tractors like you do no such luck keep up the great videos my lord

[@ClarenceFudWeasel]

Nobody is born with skills, they come through doing things and most of all through screwing things up royally and having no choice but to fix them again with whatever you have to hand. You can do it if you want. 40% common sense, 40% knowledge and 40% pressure that you have got to fix it whatever. Get yourself out there and don't be afraid of making mistakes. Anybody who says that they have never made a mistake had either lied or never done anything at all. Maybe me and his lordship will do a video talking about some of the terrible mistakes we have made over the years. But then again, maybe not, some of the people involved are still alive with access to lawyers!

[@SlipShodBob]

After the safety switch on the gear levers went on our Ford 4600 we wired a push button switch that was on only while pressed and fitted it via preexisting holes to the clutch pedal with a bolt to operate it when the pedal was depressed. Worked well when kids tried to start it

[@anthonysambrook7624]

Great video mate. The little fergie sounding nice .🍻🐕🐶👍

[@adrianhalton2104]

Sweet running ferguson can't beat them get yourself a matching plough and go work it ,looking forward to seeing the matador.

[@patkelly7999]

Great job Kimberly, Kurt and Puppo:):)

[@galwaypat5744]

Thank you lord Muck .That ferried of yours sounds nice .

[@trams66]

I see you made an appearance on pegs channel!! What a treat !! MINT 👌

[@LordMuck]

What a fucking treat 👌🏼

[@svernon7472]

Another great video, very informative. Looking forward to the matador, 👍

[@iharding4161]

Sludge n dinosaur spaff. Can’t get a better thumbnail than that 😂

[@pseudopetrus]

I just love the restorations!

[@laytonphillips6667]

Great video good to see Kim back in a video, the fergie looks better.

[@theoriginalwelderpaul]

Cracking as always. Fud Weasel's new hair style is a brave choice, always thought he suits orange better than green tho

[@ClarenceFudWeasel]

Why thank you.

[@mattthomas2836]

Flippin brill , love watching this ,hope I win a day out 👌👌👌

[@ClarenceFudWeasel]

A day out is great, but you'll still have to wear your tag like His Lordship does and you can't go far.

[@AndrewHCann]

Excellent video Lord Muck :) also got Kim back help you again excellent and hope you're doing well too!

[@exileinderby51]

Great to see the little Fergie getting sorted. It seems as though you have disabled the switch on the side of the gearbox. It used to be a right faff pushing it with your heel while trying to get the gear lever in the right spot for it to start

[@LordMuck]

Yes it's jammed in tight.

[@charleshart6992]

Another excellent update!

[@rogermills9512]

Great vid as always keep them coming.

[@milwsdl39]

First of all awesome video I’ve been wondering how you guys doing and somehow I’ve been missing your videos be safe out there can’t wait for the next one

[@mikepocock575]

Another cracking video mate,cheers.

[@jimbaird8976]

Excellent video as always.

[@jasonlewin2878]

Brilliant video as always

[@neilcrossley4718]

Great little tractors the fergy's first tractor i drove on the farm we had 2 of them

[@dalecroll7871]

nice to see you got your glamorous assistant back mucker another great vid mate

[@ClarenceFudWeasel]

I think you are mistaken, I'm working away at the moment.

[@markwestmore4178]

Great vid mucker, by the way had to get the cosby laughing gas out on a cat d4 that was stuck on my lorry, bloody typical always starts 1st time , anyway the look on the customers face was priceless, had to laugh when she roared into life. 🙃😁

[@LordMuck]

What a fucking treat 👌🏼

[@ronaldlinton9395]

Always look forward to seeing your videos nice job keep up the good work

[@mattyerfdog8873]

I guess that your brass safety button has been disconnected on the side of the transmission? Great content as always.

[@LordMuck]

It's hammered in tight like most of them were.

[@ashleydolman4356]

what a brilliant thing to do is invite some of your viewers down to meet u and george i for one think thats an epic idea

[@miketaylor8777]

Interesting to see the DB crawlers in the background, hope they will appear at some point.

[@christmaselfcustoms]

Another very informative video

[@ronniehoyle9671]

A good interesting video on how the fuel system should be on the fergy. It's become a little jem 👍

[@hfraat25]

Remember to put some oil in the czm box of the injector pump. Also drain the rubbish if there is any in the bottom. Also at the rear side if some of these old inline pumps there are filters in the housing like wadding. It is sometimes behind the pump so you might need to take it off the clean it.

[@LordMuck]

Already done. I've done the injector pump when I bought it as I thought it was playing up.

[@davidgibbings6085]

Cool video as always mucker 👍🙂

[@notsoserious0944]

Awesome you could get parts for the pump. I remember selling my old BMW R69s when the factory stopped supporting the old beauties. After awhile, it just became a rich man's endeavor. Sad.

[@JonDingle]

The Fergie sounds sweet squire. Kim has done a great job as instructor and mentor and made sure you get your hands dirty for a change. I doff my cap to you both from sunny but breezy North Yorkshire!

[@jamieshields9521]

Interesting vid👍didn’t realise fergie need to start that way. Ever seen Australian International 86 series like our 786 it has no foot throttle but hand throttle very tricky changing gear at right revs. But Ford made most tricky gearbox Rubik cube, definitely one any tractor fan.

[@vincentwalker7134]

Good content as usual Mucka 👍👍

[@alainfitton.9523]

Started without using ether! Disappointed not to hear that super knock lol.

[@andyplimbley630]

Brilliant mate look forward to the questions from George and your self lovely little fegie too sweet as a nut love it

[@wilmidwales1287]

I remember when I was young we had a old fergy like that Dad sold it on to much wrong with it would cost to much to fix be good if you could talk Mat in to bring one of his machines as well as you two wil mid Wales

[@bobpaterson1845]

Good video Kurt👍 wonder how many men are hungerin to have Kim as their other half to do all their mechanical engineering work for them 🤔😂 reckon one o your clips inserted in the video gonna put u on the packham black list 👍🤣🤣 never noticed was that TEF fitted with the decompression lever🤔

[@idontgetit3739]

The first time I had to drive an old Fergie I thought the owner was winding me up when he told me I had to use the gear stick to start it until he showed me 🤣

[@briancook4065]

My friend had a grey and it had a button which you pressed with your heel then the stick

[@LordMuck]

Which most have been done away with

[@damiencaulfield5142]

All beautiful.👍

[@1701_FyldeFlyer]

Dinosaur spaff, LOL. Mucking marvellous!

[@donc81]

It looks like at the 10 min mark Kim is using a channel lock spanner. Those are some of my favorite adjustable wrenches.

[@deanfryers1407]

Another good video mucker.

[@heavymachinery2843]

Is that blue box a gedore tool box i mainly use gedore tools 👍 good Video realy like it

[@captainclarke]

I suppose for it's time, the start position on the stick was a good safety feature, as a lot of folk would have come straight from horses. So little training for making sure it was in neutral prior to starting and possibly saved a few people's lives!

[@maidenlord6663]

I'll be honest with you I love tractors but I would give anything to go up in the air with you and a p-51 c mustang those planes are just so beautiful and you're lucky asses got to fly em flucker

[@donc81]

And I’m happy to hear there will be more matador videos.

[@galwaypat5744]

Hi Lord Muck .Is there any chance you could shine a light on my recently restored ferguson tef 20 . problem .The tractor puts out oil where the exhaust meets the exhaust elbow when running .The tractor starts easily but i have noticed that the oil pressure used to be better before this problem started .Any help would be appreciated . Thanks

[@LordMuck]

Rings could be stuck. Just start at the beginning and work your way back

[@jorgefernandez-mv8hu]

The Ferguson sounds nice!

[@BluegrassBackroadBuilds]

Love from America. I also have a diesel tractor with a system full of "shite." Its funny how often I call my tractor and other things that same expression.

[@chrisc3197]

Just wondering why you have the air inlet next to the exhaust manifold so the engine is drawing in hot air i always thought the cooler the air intake the better

[@LordMuck]

Well I wondered that also ! It's where they are but I thought maybe it would help in cold weather but must be a hindrance in warm weather ?

[@chrisc3197]

@@LordMuck you have a purpose made resess in the tank cornner maybe it's ment to go up there

[@LordMuck]

No, have a look on Google etc, lots of them are where mine is 🤷🏻‍♂️

[@jockmchaggis6797]

Can't beat a bit of dinosaur spaff

[@ClarenceFudWeasel]

Depends where I guess. I'm not a big fan of dinosaur or any other type in my Rice Krispies for example, but each to his or her own.

[@samuelgoddard5248]

can't wait for the matador restoration series, some friends were out with 3 of them last weekend towing 3.7" ww2 anti aircraft guns.

[@LordMuck]

Yes I saw 👍

[@philgardener7018]

Well done that fergie sounds great now

[@rodneydelday625]

Nice to see you back 😂 i thought you were sickly Enjoyed the latest video No notification of a new post so reset settings as suggested Too may CO-K Wombels think they can keep the Lord quiet not a hope

[@LordMuck]

I'm still putting up vids every 2 weeks Rodney, KZbin is just blocking the notifications as we don't follow some "nice and happy-clappy" style and agenda.

[@carrick2494]

Love it !

[@prime553]

The fuel lift pump must have been added at a later stage to the TEF. Mine doesn't have one.

[@LordMuck]

Yes earlier ones were just gravity fed

[@AlexanderJuholaJones]

What's the oil pressure like on that Ferguson? the MF35 I had was a similar engine and had terrible oil pressure even with 20w50 in it😂

[@LordMuck]

It has decent oil pressure.

[@AlexanderJuholaJones]

@@LordMuck maybe mine was just buggered...