Divevolk Sea Touch 4 Max Update! Have I changed my Mind??

[@knightnurse6974]

Some really helpful comments there, thank you

[@KrisHaag-n7m]

Very informative video. What is the reason for using the GoPro with the Divevolk Sea Touch 4 on the same rig/tray?

[@watertrek360]

It gives balance and comparison. I can set go pro to wide angle normally and then have the ability with iPhone to switch to a variety of lens and still have a backup of entire scenario in case. I am actually trying to build a rig that can handle a 3rd Camera. A 360 camera as well.

[@SGManhHa]

Hi! Every time we dive, we have to remove the screen protector, isn’t it? Remove and stick and remove for every dive… a bit annoyed

[@watertrek360]

I have found that I do not have to do that. I took a new screen protector, cut it in half so that it doesn't cover the opening for the camera, and stuck it inside sleeve for the phone. I raises the phone enough for more contact. So I've left it on. Now it is a little less sensitive, but it works, just be firm with finger. Make sure phone has assistive touch on.

[@SGManhHa]

Thanks!!!

[@SGManhHa]

Hi , I want to ask about the heat of 4K recording. Does it impact to the membrane? Can you share more about it if you experienced?Thanks so much

[@SGManhHa]

Hi. I just tested with your way! However, it works well in the normal environment but when test underwater, I still need to remove the screen protector.

[@SGManhHa]

Hi. Wondering you see my question? Thanks

[@abbyclave3661]

Very informative! Thank you.

[@nikharpana]

What is the main difference with the seatouch 3?

[@dixter1652]

curious how the 360 camera flooded.... I'd hate to have that happen to mine....

[@watertrek360]

The fault was all mine. I had a tiny sliver of the desiccant interfere with the seal.

[@karenling3997]

Wish to share with you after watching your videos I bought one myself. Brought it to 4-days LOB. Very satisfied. Planning next trip to try out taking macros in Lembeh. THANK YOU. ❤

[@watertrek360]

That's great news, enjoy, and safe diving..

[@robertomunozvaldes8319]

Hello, amazing video, thanks alot, can I take picture with gloves?? Or the touch dont works???

[@watertrek360]

I use on my right hand a golf glove if its colder. Really thick gloves for cold water diving, are still a challenge and you have to be patient. It will respond, but it may take you several tries.

[@multigaming6406]

great review from part 1~3, considering buying one

[@chiqkenacollins7340]

I just purchased. I've been in roatan and utila diving, and my pictures do not have the same vibrant colors as you pictures and videos. We have the same phone

[@watertrek360]

Did you use a light? I had mine mounted to a tray and had external lighting. Also, did you use a red filter?

[@gianlbaroni]

@@watertrek360 which type of light do you use? Flood or spot beam? How many lumens? I’m considering buy the Seatouch case to be used on my Sealife tray with 2000 and 3000 lumen lights.

[@watertrek360]

@@gianlbaroni For video I use a flood. I have spots, but I use them when I am in dark water like long island, then I switch to the camera flood when shooting. I am also looking at new lights, and will be doing a couple videos on those. My key to you is not just Lumen, Make sure your camera has at least 80 CRI, and preferably 90 CRI or greater. I would have to look at the sealife tray. I have two different trays from Divevolk. Suitable, but each with their own issues...

[@gianlbaroni]

@@watertrek360 finally I buy my Seatouch 4 max, attached to preowned Sealife dual tray. At the beginning I was afraid as the Seatouch housing is not fitting between the 2 arm of the tray, it is about 2 centimetres wider than available space. I abandoned the idea to modify either the tray or the housing and go mounting the housing a bit tilted on the tray to test it. Surprise, having the housing tilted it is by far better than installing it aligned to the tray, as I can reach the shutter button easier and the tilting itself it is not affecting pointing the target.

[@watertrek360]

@@gianlbaroni I am a firm believer in modifying what you have to make it work. When I position mine I always make sure the on off button is as close to the right handle as I can. Glad it works for you.

[@karenling3997]

Thanks for the reviews… simple to use. I am really interested to get one…

[@watertrek360]

You can't go wrong here, not for the price.

[@karenling3997]

@@watertrek360 agree… 😂 thanks for the review and sharing. Great help for an amateur like me… plus GoPro screen is too tiny to look at… so happy that I can bring my iPhone into the water. THANK YOU…

[@aaziizkhan]

How do you do the color correction? My videos were very blue

[@watertrek360]

@@aaziizkhan first are you using a red filter? How deep are you. Using a red filter is the best first option. If that doesn’t work I use FCPX or Affinity to color correct if needed. Normally with red filter under 20 meters don’t really need to if you are in clear water.

[@aaziizkhan]

@@watertrek360 I just bought the clamp for red filter. I will use it in my next dive and share with you. Thanks for your advice. I usually dive 20 - 30 meters and water is clear

[@pelagicbeing]

Great video and I’m glad to hear you’ve worked out the issues you first had with the housing. Do you know if Divevolk do replacement touch screen membranes should it get damaged?

[@watertrek360]

They replaced mine that had the major bubble issue for free. That was very nice of them. As for the membrane I don’t believe so, it requires a new housing. To my knowledge membranes are not repairable. But damage can be by many things. Always be careful of the membrane on deck and when transporting and if wreck diving.

[@DiverWayne]

does it ever fog inside the case due to temp changes?

[@T-C-Time]

I have used it California when water temp has been 52 degrees. I have not had a problem. But I was worried about that. I have used a desiccant like for GoPro that will fit, if placed correctly

[@DiverWayne]

@@T-C-Time thank you 🤙🏼

[@hendrikschepkens6455]

Did you use the red filter?

[@watertrek360]

Yes Divevolk among others have one that fits the filter bracket.

[@boomermcfall]

Thanks for sharing!!! I may purchase a Divevolk housing for the new iPhone 14 Pro Max that I just ordered. I would love to compare underwater video with it against the new GoPro 11 but I believe that the iphone may win while shooting still photography???

[@watertrek360]

I have the iPhone 14 on the way. Great minds think alike.

[@watertrek360]

I did a review of the iPhone 13 vs the Hero 9-10. You should check that out

[@boomermcfall]

@@watertrek360 I will! Thank you!!

[@MylesDalton-o4d]

Trying to decide between the Divevolk with my iPhone 14 pro max or a go pro 11. What do you think?

[@watertrek360]

Either one. Go pro 11 is smaller less if a foot print. If you lose it sucks. But you’ll live. If you lose your iPhone 14 you are SOL unless you have 2 phones. That said if you haven’t bought the GoPro 11. Think of that cost. Plus an underwater housing stick or tray. Since you have the 14Pro already minimally all you need is the DiveVolk housing and a lanyard. Video quality is great on either. I think the 14Pro is slightly better in clear water under 60. feet. It’s up to you. Risk vs reward. The diveVolk let’s you change whatever you want when you want. Check out my video comparing iPhone to GoPro.

[@iBJanky]

Great video! I’m looking to get this exact same housing for my iPhone. That being said, do you think it’s worth getting the red filter kit for it? Does it make a big difference in video quality? I only dive in blue waters, if that matters. Thanks in advance.

[@watertrek360]

Yes if you are going deeper than 30-40 Ft. I would get red filter. It helps

[@iBJanky]

@@watertrek360 Thanks!

[@Wann_4]

Thanks for the great review! The videos look amazing. Did you use a red filter with the native camera app to film the wreck?

[@watertrek360]

Yes case has a wet red filter

[@watertrek360]

Yes I used the red filter on the wreck.

[@manius_dive]

I have a question, is it worth being interested in Divevolk 4 Max? or maybe some other company but not touchable anymore?

[@StevenMorlock]

Did you use a red filter or color correct the videos you took?

[@watertrek360]

I used the red filter that came with housing.

[@huiyongchia]

@@watertrek360 Thanks for a great review and tips, and the recommended settings! Looking forward to using my newly purchased Divevolk Seatouch 4 in Raja Ampat later this month. One question please: Besides the Divevolk red filter, do you also use the macro wet lens and if so, how do you switch between this and the red filter while underwater? Thanks!

[@watertrek360]

@@huiyongchia I have the WA lens. That has the same problem. You can't unless you take it off. Meaning the red filter goes on first, If you want to remove Red filter, Macro or WA lens have to remove, then RED filter, and then put lens back on. Alwqys a pain, and then you need a place to keep filters without damaging them UW. That was one of my gripes about the lens attachments. kzbin.info/www/bejne/q4iafYideN-eosU

[@huiyongchia]

@@watertrek360 thanks for sharing! Just watched the good bad and ugly video and picked up more tips. Appreciate 🙏🏻

[@LarryRichelli]

Can't wait to try this with my Iphone 14 pro max. Should be quit a bit better than the 13.

[@watertrek360]

Make sure your iPhone is at most current release of 16.3.1. There were focusing issues with earlier software versions. I’ll let you know. I will be using it this weekend with the new software.

[@taravamos2954]

I would love to see a comparison with the Axisgo case!

[@watertrek360]

I’ve thought about that. I have a couple other housing to review first

[@timbackster2910]

If you flood you camera. DOn't consider it an ornament. Remove the battery and put it in 50/50% solution of water and Methylated spirits (metho) for a couple of hours. Then get it out and open it up and dry it off. Now pop it in some rice. Water and metho DO mix so when the solution gets into the camera it will mix with the water in the camera and the metho when given a chance WILL then rapidly assist in the evaporation of ALL the water in the camera into the rice which is a huge absorber of water in any case. Even if you submerged you phone some weeks ago (Not you Water-trek - anyone reading this message now), I'd still give it a go now...what have you got to lose? The metho will inhibit any growth of bacteria that may occur over time if it is left wet. Good luck.

[@AngelValle-j6z]

Technology looks great but does NOT work for scuba diving in cold water. Always foggy. After sales service is poor. 300USD for a limited device, a shame

[@watertrek360]

I use a desiccant in cold water. But I agree the hardest part about a cold water. Gloves they don’t really work well on touch screen.