www.enlightauto... WARNING: This video is only a guide! Attempt at your own risk!
Пікірлер: 54
@CallmeFrodo8 жыл бұрын
This is by far the most in-depth video on how to remove headlights and install HID's that I have ever seen. Well done, and thanks for the very helpful video!
@caliknowshow28 жыл бұрын
I got a pair for my 2013 Ram 1500 (Tradesman) in April and no problems. Works great especially in my location South Texas on these dim lit highways with wild game everywhere. Great white blueish color. Very helpful video and great product. Thank you!
@tannerparrish38077 жыл бұрын
This video was very helpful to me, I didn't need the bulb parts, I just needed to know how to remove the headlights and he did a excellent job explaining that to me.
@cb22boarder8 жыл бұрын
I do appreciate you including how to pop the hood! Seriously though, very good guide. Thank You.
@wWLoganWw7 жыл бұрын
Make your lives easier and just remove the grill. You don't need to pry the clips with the screwdriver.. just pull out with a little force and it will come right out.
@phl20099 жыл бұрын
Best guide by far. Very detailed. Thanks a lot!
@rreyes20778 жыл бұрын
Dude your awesome!! best tutorial video ever!! regardless of topic. so clear and detailed
@michaelgreen13716 жыл бұрын
I didn't read all the comments but you can save alot of time by not removing the top plastic piece and grill. You can easily get the headlight out with a 10mm socket and a long extension. Not sure why everyone says take off the top part and grill??
@GuyanezeGangster8 жыл бұрын
I want your headlights. I have a 2013 1500 with the piece of chrome in the middle. The all black looks way better. Great video.
@Enlightautomotive8 жыл бұрын
+Darian Pooran The kit is available at www.enlightauto.com Its not my truck but I agree the blacked out grill looks good!
@PRO4XKEV7 жыл бұрын
Just installed my kit on my 2013 Ram 1500 with projectors, not a hard install, took me 2 hrs. Lights are bright. Also the low beam no longer cancels when high beam is turned on, both low and high are on when I click to high beam, so I have lots of light now.
@DR.Sneed789 жыл бұрын
I have seen some pictures of the ballast mounted inside the headlight behind the cover, are there any cons to doing it that way?
@jeffvardaro78297 жыл бұрын
You should also do a video on the Fog lights!!!! Please!
@keystonedragger9 жыл бұрын
Very clear instructions, great video. have you had any issues with melting or radio interference? seems like most of the hid kits i install interrupt the radio signal when they are powered on. any thoughts?
@rootiest8 жыл бұрын
very in depth....good video thank you
@jessedoiron-johnson94538 жыл бұрын
Have you ever had any issues with them melting the housing? I have a 2014 Ram and every vehicle I've owned I had HIDS in them, someone told me that the housing on the Ram will melt with HIDS or LED?
@grantgrant19687 жыл бұрын
I'm looking to purchase a HID Kit, I have a Ram, but I have aftermarket headlights that use the H1 bulb, but there's no option to change the bulb on your website
@dustincercado9 жыл бұрын
Thanks for your help.
@pantis5567 жыл бұрын
You're prying on those clips wrong. You need to get under the cover and then pry and it comes right off. You can actually just grab the cover and pull it.
@vladkot18 жыл бұрын
Max, i have '14 Ram 2500 with Cummins with projectors and i want to do conversion kit, im wandering if you offer 55w kit for low beams? Thanks.
@tuck20097 жыл бұрын
Will this kit work on after market projector headlights?
@weredoomed64018 жыл бұрын
When did Dodge team up with Rube Goldberg?
@asheetuglasse8 жыл бұрын
just used their kits for my 2014 ram hid's for the highs and lows plus LED in the fogs
@asheetuglasse8 жыл бұрын
they work great no flicker no warning lights on the dash just bright ass lights lol
@Jr-eu9ex8 жыл бұрын
What the number for a fog light in a 2015?
@redartisanwolf67167 жыл бұрын
I can't find hid kit for lights for 2012 need asap
@Enlightautomotive7 жыл бұрын
Hello, if you have a 2012 model that has the Quad style headlights, you can purchase our 2013-2014 Ram HID system and select "Reflector Style Headlights" and it is compatible with the 2012 models. However if you have the "Dual" Style headlights, we currently do not have a kit that is compatible with those headlights.
@SlimPeas238 жыл бұрын
I know the rams have problems with the HIDS with flicker and turning offdoes the kit come with an Anti-Flicker Modules?I have a 2012 ram 1500 Longhorn
@Enlightautomotive8 жыл бұрын
+SlimPeas23 This kit will work on all 2009 to 2014 Rams if you have the Quad headlights with an H11 low beam bulb. Or the 9012 Projector headlights. Just select which headlights you have on the website. The kit has all the necessary electronics integrated for proper function. However the kit is not compatible with any of the "dual headlight" H13 models.
@SlimPeas238 жыл бұрын
+Enlight Automotive - Vibrant LED and HID lighting technology oo I need the H13 and the 9005 for my Bulbs for my headlights
@Mr_Aspiration8 жыл бұрын
how does doing it to the high beams work.. do you drill 2 holes in the headlights???
@Enlightautomotive8 жыл бұрын
+Gnoob The 2013+ Rams with factory projector housings actually have 2 high beam functions. The factory projectors are dual-beam projectors. There is shutter inside the projector which folds down to give you a high beam pattern from the projectors. When you install the HID system, this function is not compromised so you do get HID low beam and HID high beam function. However the 2013+ Rams also have a dedicated 9005 high beam bulb which is located adjacent to the projector inside the headlight housing. We do have an HID system available for this 9005 high beam bulb as well. Installation process is basically the same, you just need to drill a 2nd hole in the cap to allow the HID bulb harness to fit through.
@Mr_Aspiration8 жыл бұрын
+Enlight Automotive - Vibrant LED and HID lighting technology sweet I appreciate the Info I have standard head lights in my 14 ram so I will need both kits I assume correct me if I'm wrong?
@alexrodgers52968 жыл бұрын
I put mine in I got the 9012 hids because and they are flickering when I turn them on what do I do??
@Enlightautomotive8 жыл бұрын
Where did you get the kit from? The 2013 and 2014 Rams require a canbus compatible ballast or the lights will flicker or shut off.
@PRO4XKEV7 жыл бұрын
How hot/warm does the ballast get? if at all.
@Enlightautomotive7 жыл бұрын
The ballasts will get warm after being on for a while. If the ambient temperature is 70 degrees F, the ballasts can warm up to 120-130F which is normal.
@ramoncar218 жыл бұрын
low beam is 9006 or 9005?
@Enlightautomotive8 жыл бұрын
+ramoncar21 If you have a 2013 or 2014 Model with projector headlights, its 9012 bulb type for the low beam.
@aronharper70018 жыл бұрын
+ramoncar21 I installed on my ram and the low beam is 9005 and the highs are H11....Im pretty sure
@Enlightautomotive8 жыл бұрын
+Aron Harper Low beams: 2013-15 Rams with projector headlights are 9012 bulbs 2013-2014 Rams with reflector headlights are H11 bulbs 2016 rams are 9005 All Rams 2013-2016 use 9005 high beam.
@aronharper70018 жыл бұрын
And what about a 2011 Ram 1500? Thanks!
@5cent276 жыл бұрын
Just ordered this kit, any error messages from anyone so far?
@Enlightautomotive6 жыл бұрын
5cent27 nope, i don't recall any error messages ever being reported. They have been well tested and we have many happy customers.
@5cent276 жыл бұрын
Enlight Automotive thank you! Any alternative size to the 25mm step bit? Will a 1 inch spade bit work or would a different size be better?
@NuclearFissionBomb8 жыл бұрын
So for the 2012 do you not need the relay?
@Enlightautomotive8 жыл бұрын
If you have a 2012 model with the H11 "Quad" headlights, you can use this Kit which is less complex and has no relay: www.enlightauto.com/collections/enlight-your-2013-2014-dodge-ram/products/2013-2014-dodge-ram-enlight-massive-photon-generator-xenon-hid-headlight-kit-low-beam
@NuclearFissionBomb8 жыл бұрын
+Enlight Automotive - Vibrant LED and HID lighting technology Ok thank you for your reply! My dad ordered me a kit and added 2 relays, 1 for fog lights 1 for headlights. So I don't NEED them but would they help?
@Enlightautomotive8 жыл бұрын
There are many many different HID kits on the market. Without seeing the kit you have in person I can't really advise what is needed or not needed. All I can say is that the kits we have do not require a relay for the quad headlight models. But other kits might, depending on how they are designed.
@NuclearFissionBomb8 жыл бұрын
Enlight Automotive - Vibrant LED and HID lighting technology www.hidextra.com/h11-hid-kit-35w-55w/ This is the kit I got 55W pro CANBUS Series also got the H10 for the fog lights.
@NuclearFissionBomb8 жыл бұрын
+Enlight Automotive - Vibrant LED and HID lighting technology Just a bump to my previous question. I greatly appreciate your help thus far. I just received them in the mail and am waiting to get every bit of information I can before trying to install.