DIY 2017 2018 2019 2020 2021 Jeep Compass Replacing 8.4”UConnect LCD Screen

[@Ralph2-v4c]

Dude your instructions were spot on! Just changed out my daughter's screen and thanks to your video it was a breeze! God Bless!!

[@MobileCarMechanic]

Glad it helped. Thank you!

[@jdneilso]

Thank you for this video. You saved me $750. You didn't have to completely disassemble the radio. Just take off the metal casing with all the glue, duck tape the top part of the radio to the bottom, take out the 6 screws, and take out the screen. Also, for others watching, when I put in the new screen, I was still getting the ghost touches. I turned off the car for 30 minutes, allowing the uconnect to soft reset, and the ghost touches were gone. Thanks again sir! Oh, one more tip, use goo gone for the glue.

[@MobileCarMechanic]

Glad I could help. Thank you for the tip.

[@weigel75]

Getting the bezel off was the most difficult/scariest part. I spent more time on that than the actual replacement of the screen. Thanks for the video!

[@MobileCarMechanic]

Glad I could help.

[@itsrheachelle]

Did you use the same tool he has? I’m using a flathead screwdriver and still nothing

[@totallyawesome80s55]

I really appreciate this video. I'm replacing my screen right now and your video is a big help. One thing, though, for anyone about to attempt this replacement: WEAR GLOVES! My screen was delaminated more than the one in the video and that adhesive gets EVERYWHERE and it's really hard to get off. It would've been nice if you showed, or even said, how you dealt with the adhesive, instead of just saying, "I cleaned it up." I'm using a paper towel and just kinda wiping the worst of it off. It's not working very well, so if anyone has a better idea... *update* I ended up using a microfiber cloth, which left less fuzz behind than the paper towel. And when it came to putting it all back together... First of all, I did it on my desk rather than on a car seat, which makes the whole process much easier. Then I got my Wi-Fi antennas plugged back in, set all of my stand-offs in place, and carefully lowered the cover (with the circuit board) onto the front part. I held onto the black port on the back to keep the circuit board and the metal frame together while I lowered it. Lastly, I very carefully slid each screw into its hole and once they were all in place and I was sure everything was lined up, I tightened them one by one. Great success!

[@MobileCarMechanic]

Thank you for the feedback. We also struggled with getting it off and tried random cleaners and such and didn’t think anyone wanted to watch the struggle as we try to get straight to the point. We ended up using a combination of goo gone and window cleaner with a microfiber cloth. Thanks for watching and glad the video was helpful. Cheers!

[@MellozNailz]

Thank you so much for this video! I have a 2018 Jeep compass and have had this issue for a while now. I just finished switching mine out (yes I'm a woman) by myself. This video made it super easy. Thank you Thank you Thank you. I am so excited to have my display back 😁

[@MobileCarMechanic]

Glad it helped!

[@lou-bs4zv]

Can you share which one you bought from amazon please.

[@MellozNailz]

@@lou-bs4zv I just clicked the one in the video description.

[@Ever_Eddie]

Looks like this is a common issue with the LCD's on the jeeps. I have a 2018 compass having this exact issue. I just ordered the screen off of Amazon. Thanks for sharing this.

[@MobileCarMechanic]

Indeed. Thanks for sharing.

[@gtaclevelandcity]

how did the swap go? my 2018 compass is needs a swap right now and I was looking for a replacement.

[@Ever_Eddie]

@@gtaclevelandcity will be doing the swap sometime this week. I just received the order off Amazon. Will provide feedback when I do.

[@annharrison2960]

What screen? Mines 2019 jeep compass

[@Ever_Eddie]

​@@gtaclevelandcityI just finished doing the install, and it worked beautifully just following the video. It was actually easier than I thought it would be. Just a screwdriver and patience needed.

[@ambreaks]

Thank you so much for this. Saved my mom $800+ replacing this for her.

[@MobileCarMechanic]

That's awesome! Glad you could help her out.

[@diehardyanksfan2010]

This video was super helpful and I was able to easily replace the touchscreen on my 18 Jeep Compass. Saved a ton of money compared to having replaced by dealership. Thank you!

[@MobileCarMechanic]

Glad it helped!

[@YTjennifer]

Thanks for the video. Just replaced the exact same screen (8.4" one on Amazon) on my 2017 Jeep Compass, the "new" version of that year. Super quick and easy. We used gloves (recommended by another commenter) because of the lamination goo, and laid the unit in the back (luggage area) for a more flat surface. The hardest or most nerve-wracking part was removing the facing. Your video was spot-on and precisely what was needed to DIY the screen replacement.

[@MobileCarMechanic]

Glad I could help.

[@Ober1392]

Just used this video as a guide to replace mine. Some slight differences with my 2019 Jeep Compass but nothing you can't figure out. Thanks for the video!

[@MobileCarMechanic]

Glad it helped

[@dennislewis1693]

Just replaced the screen on my wife’s Jeep 2017 trail hawk and this video was perfect!! Thank you so much

[@MobileCarMechanic]

Awesome! Glad to hear it was helpful!

[@gileswintle]

Thank you. Great instructions. All went to plan. The most difficult bit is getting the fascia out. I ended up using a crow bar with tape over it and breaking one of the clips. But I glued it back.

[@MobileCarMechanic]

Glad it helped!

[@marmarshakur]

Man, I just wanna say thank you tremendously for this video, you are a Godsend!!! I have a 2017 Jeep Compass & the mechanics were a lot different than the 1 you were working on, simpler actually, but either way, your guidance truly helped me through it & I appreciate you so much!!!

[@MobileCarMechanic]

Thank you, I’m glad I could help.

[@phistofswords]

Man, you are the best! Thanks a lot for this video, you've saved me A LOT of trouble, just fit the new screen following your exact steps on Jeep Compass 2017 (8.4") and it works!

[@MobileCarMechanic]

You are welcome! I am glad to hear it was an easy fix.

[@SaraKimberlin]

I just replaced the screen on my 2018 jeep compass and this video was so helpful! The plastic cover was so excruciatingly difficult to get off. I had to use 3 different sized pry tools all at once. And mine leaked a ton of glue but I just used Goo-Gone and paper towels and it came right off. Other than that it was a breeze, thank you for this video!

[@MobileCarMechanic]

Glad our video helped! The glue was the annoying part. Enjoy your working radio. Cheers!

[@dougrogers956]

I have this problem also on my 2018 Compass. The good thing is that Jeep is replacing this for me under my 6 year warranty. Getting it replaced on Tuesday. Horray.

[@MobileCarMechanic]

Thats great! Good thing you have warranty.

[@footbal9584]

Is the 6-year warranty part of the standard warranty or was that something extra you purchased? My 2018 Compass has started doing the white lines on the screen that many people have experienced.

[@annharrison2960]

Dont happen to have video how to replace 7 inch screen, the connects are different and cant get screen touch to display but can hear clicking when touch screen buttons. Replaced with new factory replacement part for screen

[@MobileCarMechanic]

We do not currently, when we do we will make a video. The concept should be similar as you will need to disassemble the head unit to replace the screen. Just make sure to match up the wires and screws and you will be good to go!

[@nicolebixler8074]

Thank you so much for this! Just finished replacing my screen on my 2018 Compass. This saved me $600 since the dealership wanted to replace the entire radio.

[@MobileCarMechanic]

Happy to help.

[@tomhoffman4221]

Great instructions. I had to 'reset' the entire unit/Uconnect by pressing the power button and tuning button simultaneously with the engine running before the new screen would come back on.

[@MobileCarMechanic]

Thanks for sharing

[@jennnunez9466]

This video is amazing thank you so much. I was ready to do it myself until you got to the motherboard and those parts came off 😂

[@MobileCarMechanic]

You're welcome!

[@GRO0821]

I just saved $1,500 thanks to you!!! 🙏🙏🙏

[@MobileCarMechanic]

Glad I could help!

[@omaravalos9822]

Thank you so much!! I just replaced my screen and your video was super helpful! Lifesaver

[@MobileCarMechanic]

Glad it helped!

[@edgar3042]

Thanks for sharing mate! Great step by step explanation!

[@MobileCarMechanic]

Glad it was helpful!

[@important-tips]

more 300.000 jeep compass 2018 on detorit have the problem the display screen dont show all screen complet

[@MobileCarMechanic]

I didn’t realize this was a common issue until I diagnosed this vehicle for a friend. Luckily this is a cheaper option than replacing the whole radio.

[@joelbenitez5794]

Will this fix the half black screen issues

[@MobileCarMechanic]

This has been my first experience with this issue so I’m not sure. I’d probably try to disconnect the battery and see if it resets, if not then I’d replace the screen.

[@itsrheachelle]

Any update on your screen?

[@samirbhavsar4916]

How different is the installation process for the 7 inch screen versus the 8.4 inch screen?

[@MobileCarMechanic]

The concept is the same but the placement of screws and the amount of components needing to be removed are more than the 8 inch for some reason.

[@gilbertormoraes]

It looks like the 7-inch screen sold on Amazon is a little bit different from the one in the video. On Amazon the screen doesn´t have the screws fitting in the back. Are you sure that the product is the correct one?

[@MobileCarMechanic]

The display used in this video is the 8.4 Inch so it will differ size wise and interface wise!

[@angelo_bgg]

My compliments for your clear and detailed video! I would appreciate another video showing how to disable the Uconnect data channel towards Stellantis the hardware way: I mean how to disconnect the UMTS antenna.

[@MobileCarMechanic]

Great suggestion! Will do.

[@dineysigates1673]

Hello I have the same problem with my Jeep Compass 2018 limited, can you help me to know which screen I need? The 7 or the 8.4? I have both of them add to my Amazon car let me know please so I can buy it.

[@MobileCarMechanic]

This is what the 7 inch looks like - i.ebayimg.com/images/g/iycAAOSwb5pnLPcB/s-l1600.jpg The 8.4 Inch looks like this i.ebayimg.com/images/g/C98AAOSw2ednCJbd/s-l1600.jpg

[@aidan8474]

There shouldn’t be anything extra to do for the backup camera to work again, correct? Also, I tried unplugging everything in the back a while ago just to see if that would solve the black screen, but shortly after the auto start stop service light came on and aux battery had to be replaced. was that just coincidental timing or was it because the display was unplugged?

[@MobileCarMechanic]

You shouldn't need to do anything additional to replacing the screen. It appears that it is coincidental that the AUX battery had gone bad as removing the radio wouldn't have interfered.

[@ShowtymeDesignz]

Wondering if the mopar screen is different? I need to order a digitizer because I’m not paying 1,100 for a screen in a 6 year old compass

[@MobileCarMechanic]

The replacement also said LG display on the back meaning more than likely it’s the same display assembly. No issues since the making of this video.

[@ShowtymeDesignz]

@@MobileCarMechanic thank you I’ll pull mine apart and see if it’s the LG display, if so ima order it, i replaced the outer screen cover before and then it went bad 5 months later

[@billhampson7393]

I have a compass and have to do the same. I did not want to have to bring it into a dealer and get ripped off, now I will order a new one and do it myself, I will let you know how it goes, thanks.

[@MobileCarMechanic]

You can do this! I’d recommend watching the video as many times as you need to familiarize yourself with the steps and process.

[@anaturrubiates4516]

Can I change a 7” screen to an 8’4 screen? Is it necessary to replace the module as well. ?

[@MobileCarMechanic]

If you’re asking if you can replace just the touchscreen and installing on the 7”radio that won’t work unfortunately. If you want to replace the whole radio with the 8.4 I believe the wiring in the back of the radio is different. You’d be better off with an aftermarket radio.

[@heathernicole5794]

Hi, I have a 2018 Jeep Compass; my screen has had lines running through it since the summer. After the car cooled off, it would be fine; touch is still responsive. Now it is winter where I live, and when I turn my car on the screen has lines on it, and while the touch screen is still responsive you can't see anything until about 30 minutes of the car being on, everything works normally again even the backup camera. Would this be a screen issue or a wire issue? I read somewhere online that it could be a a wire but I have no idea what wires to order just incase. I don't want to open it up and not be able to fix the issue Thanks in advance

[@MobileCarMechanic]

It sounds like the cold is affecting the connection to the screen and when it warms up then the connection is restored. I don’t know what wires it could be, but it would be worth taking apart. Disconnecting and reconnecting wires to see if that restores the connection. It’s a possibility that there could be some corrosion on the pins of the wires/cables and may be a good idea to clean them with rubbing alcohol on a cotton swab.

[@Tammayrend]

I have a similar issue with my 2017 Compass. The lines appear MOST of the time except when I hit a bump or the car gets really warm. I suspect a loose solder or wire but have not been able to find it!!!

[@marcofranco6888]

I just did the switch and touchscreen I super sketchy, have to push hard or isn’t reading at all. Any ideas ??

[@MobileCarMechanic]

You may have a defective screen. Double check the wiring but sounds like the part might not be good.

[@Suave_op]

I’m having the same issue with my jeep but I had a question ! Can I just replace the whole radio as in the screen and “brain” and just hook it up ? Or would that not work

[@MobileCarMechanic]

That would work but the cost is going to be higher and it’s gonna do the same thing eventually. Not sure if these radios have codes that need to be entered.

[@Suave_op]

@@MobileCarMechanic I’m thinking about going to grab one from the junk yard to test it out 😅 but thank you appreciate it !

[@CR7_the_goat28]

Hi can anyone help? Can a compass 2017 model stereo be replaced by 2020 model. Fitting is ok but will it raise any software issues?

[@MobileCarMechanic]

Looks to be the same as the 2017 and shouldn’t be an issue.

[@UtubeSurfer7]

Does this also fit the 2018 jeep compass with the small screens?

[@MobileCarMechanic]

Here is the part for the smaller screen amzn.to/3PwhL9X

[@UtubeSurfer7]

@@MobileCarMechanic I don't need a small screen, my question is , does this tv also fit the jeep compass with the small screens

[@MobileCarMechanic]

If you are referring to the whole radio it will fit but the connections are different requiring a lot more work to get it working properly. You would be better off getting an aftermarket radio. Also if you are asking can you upgrade your small screen with the bigger screen by swapping it, then no that would not work.

[@UtubeSurfer7]

@@MobileCarMechanic alright , cause I have a 2018 jeep compass and it's the one with the small screen, and I wanted to swap it out for one of these.

[@RhodyTeesScreenPrinting-io4yg]

Great instructions. Just installed a new touchscreen and everything works. The only problem is the GPS. It shows as if I was in the middle of the ocean. Do I need to reset it or something?

[@MobileCarMechanic]

You may want to check the antennas plugged in the back of the radio. Could be loose or not plugged all the way in.

[@josecastellanos1968]

@@MobileCarMechanic Thanks for the answer. Which wires are the GPS antenna?

[@ilirianDervishaj]

Just did a screen replacement. Everything works fine with the new screen but now the port that you use for CarPlay stopped working. Does anyone have any ideas why this happened

[@MobileCarMechanic]

I would suggest checking your connections on the back of the radio.

[@GarethNorthwood-s8n]

How much is a new screen, i live in the UK

[@Tubastank1]

$20 on Amazon in US

[@MobileCarMechanic]

The product link is in the description.

[@brandonsaxton5231]

just changed it and im still having phantoom touches any suggestions as to why?

[@MobileCarMechanic]

Could be a bad screen

[@jdneilso]

Are you still getting them? I was at first but after turning off the car for 30 minutes, the uconnect soft reset and I was good.

[@maritzabecerra8532]

Hello. I installed the new screen and it worked, that same day later on it did not turn on. The following day it turned on and now we are back to not turning on. Do you know if perhaps its a faulty screen or is there something I need to reset?

[@MobileCarMechanic]

Did that happen before the screen replacement? If not. Check your cables and if that doesn’t work it sounds like failed replacement.

[@alexcoulier5771]

Thanks it worked but screen is a half inch to the right what's displayed on the screen

[@MobileCarMechanic]

I would reseat the ribbon cables to see if that is the issue, if not it may be a defective display.

[@alexcoulier5771]

@@MobileCarMechanic i was thinking I could recalibrate the screen?

[@Tacticalpanda757]

Mine that i ordered didnt have stand off screw points on the replacement screen

[@MobileCarMechanic]

I would recommend reaching out to the store or individual whom you bought the unit from.

[@billyatlecalemission]

Hey mate. What did you use to clean the goo off the unit?

[@MobileCarMechanic]

I used some goo gone and some glass cleaner with a lot of elbow grease.

[@KonstantinosPaschalides]

hey. Thank you for your video. Can i ask if this screen works also for Jeep compass 2017. The manual said that the screen is Uconnect 8.4/8,4 NAV but i don't know what kind of screen must order.

[@MobileCarMechanic]

Looks like it does work for the 2017 as it has the same interior. So you would be good to purchase and do the repair. Cheers!

[@rapanovich]

Hello everyone, I replaced the touchscreen on my 2018 Jeep Compass, but now the settings are messed up. The rearview camera stopped turning on, and a new "cabin camera" button appeared in the settings, which I don't even have. Has anyone encountered a similar problem? How can I restore the settings? Resetting through the menu doesn’t help.

[@MobileCarMechanic]

That’s odd if you just changed the screen part. I would try to disconnect the car battery and let it sit for a couple mins and then reconnect to see if they resets the unit.

[@jimhejl4292]

What a great video. I have a 2018 Compass. What is the part number for the screen?

[@MobileCarMechanic]

Thank you. Here you go: amzn.to/45QHGOM

[@ADRIANPEREZ_1]

I have a 2017, would this work with the screen he used?

[@MobileCarMechanic]

The 2017 uses the same screen so you will be able to the part in the video description.

[@ADRIANPEREZ_1]

@@MobileCarMechanicdoes the jeep battery has to be disconnected?

[@jeudymarte642]

Hello, I have a question, my Jeep screen started to turn half black until it stopped, so could that be it?

[@MobileCarMechanic]

You may want to look at taking it apart and then disconnecting and reconnecting ribbon cables to see if that fixes things, if not I’d then recommend replacing the display.

[@Tacticalpanda757]

Question... My Uconnect screen still registers my touch and still works but there is no picture. Is that just the LCD panel that needs to be replaced or something else

[@MobileCarMechanic]

I would try either unplugging the battery, and aux battery if you have one and then reconnecting, or pulling the fuse to the radio to power cycle it. If that doesn’t work it may be a unit problem or screen. It sounds like the radio is still functioning but needs to be reset.

[@Tacticalpanda757]

@MobileCarMechanic like I had to memorize where to tap on my screen to get to my bluetooth to play music. Before that the screen went pink, sometimes white glitchingness and freaking out

[@MobileCarMechanic]

It sounds like the lcd might have gone bad, try the suggestions and let us know if that brought the unit back to life. If it doesn’t then order a replacement screen.

[@brianstewart205]

I'm having a problem where half of the screen is blacked out from time to time. The touch still works and sometimes the screen works fine, do i need to just replace it?

[@MobileCarMechanic]

I’m not sure a screen replacement will fix it, I’ve read online that disconnecting the main battery and aux battery and then reconnecting helps. The aux battery controls the radio from what I’ve read, but haven’t experienced this myself and haven’t tested. But it’s worth a try as it’s free. Cheers!

[@michaelagunning3668]

Do the tuning/power knob and volume knob still work? I'm wanting to replace my screen so I've been researching and I've read some stuff about how the tuning/power knob and the volume knob no longer worked.

[@MobileCarMechanic]

I didn't have any issues with the knobs at all.

[@baileyboo2001bd]

I've got this issue, I'm going to carry out the repair myself following this video however I am concerned that the new screen I fit will end up doing the same thing at some point. Have these screens been adapted to prevent the issue happening again?

[@MobileCarMechanic]

I’m not sure if they will suffer the same fate to be honest. Given that the glass is optically glued to the display it may possibly happen again due to the cabin being extremely hot during sunny days!

[@erikashalbi508]

love your video I have a Jeep Compass Latitude 2018. the radio screen turn white white lines of different colors then black do you think is same screen the one i need to change and do you know the part number is 7'' screen. Thank you very much

[@MobileCarMechanic]

Here is a link to the replacement 7 Inch Panel, You may want to disassemble and try to disconnect and reconnect the ribbon cables to see if that resolves the issue. Otherwise it may be the radio or the display. amzn.to/46WePsN

[@erikashalbi508]

Thanks

[@erikashalbi508]

Sorry witch one is the RIBBON CABLES please

[@MobileCarMechanic]

imgur.com/a/ptqteHO@@erikashalbi508

[@erikashalbi508]

Thank you very much

[@tomhoffman4221]

Great instructions.

[@MobileCarMechanic]

Thank you!

[@nohemid.5659]

Great job! Where did you get the new replacement from? I have the same screen but I can’t find a new replacement. Help!

[@MobileCarMechanic]

amzn.to/45QHGOM

[@I_-dj3kd]

‏‪11:57‬‏ ​@@MobileCarMechanic

[@fernandoluna2539]

Where did you buy this lcd with replace in my Jeep?

[@MobileCarMechanic]

The product link is in the description.

[@gustavobenitez3418]

I did the same but my camera is not working. How I can fix that?

[@MobileCarMechanic]

Was the old camera working? If not then you either got a bad camera or need to see if your getting voltage on the wires that connect to the camera to radio.

[@drichcreek2008]

Replaced the screen but ghost touching still happening. Not sure what to do.

[@MobileCarMechanic]

Did you wipe the screen with anything?

[@drichcreek2008]

No, I took off the protective film that needed to be removed. Otherwise no cleaning products.

[@brandonsaxton5231]

@@drichcreek2008I’m having the same problem did you ever figure out the solution?

[@jdneilso]

I still had the ghost touches when I first installed the new screen. I turned off the car for 30 minutes and the uconnect did a soft reset, and I was good.

[@ErinEvette]

Did you have to purchase both screens? Which screen is for the Uconnect?

[@MobileCarMechanic]

If your vehicle has navigation you will use the 8.4 inch. If you don’t then you will use the other one listed in the description.

[@Shane87able]

Question. Im having the same problem with the screen, would like to replace it, but not sure if mine is a 7” or 8” how do I find that out? Don’t want to buy the wrong screen. Thanks

[@MobileCarMechanic]

It would be easier to measure the screen diagonally. You can also take the unit apart and look at the part number on the back of the display. What year and model is your vehicle?

[@Shane87able]

@@MobileCarMechanic Jeep compass longitude 1.4,2018. Checking the specs online I found out that the 7” doesn’t include nav system and the 8.4”does apparently ,(which mine has)so it answered my question. Will be ordering the 8.4” and thanks to this video will be able to do it myself ☺️ Thanks again 🙏🏼

[@ixtrk5119]

​@@Shane87able I have the same question, I don't know whether to order the 8.4 or 7 inches

[@Shane87able]

@@ixtrk5119 I measured from one corner of the screen to the other and got 8.4 inches. Placed order for it, received within 5 days and thanks to this video was able to install it myself within 30 mins.

[@alexcoulier5771]

Is the glue from the lcd because it melted or is that always on there and not something to worry about? Would appriciate it.

[@MobileCarMechanic]

The glue you see is the display adhesive that secures the digitizer to the lcd. It helps seal the gap between the glass and the display for better optical clarity. It’s not supposed to turn into goo but given how hot it can get in a car when it’s extremely hot that will definitely weaken the adhesive and melt it.

[@alessandrodelsignore3283]

Thanks for the video. Does the Display has to be original or it doenst metter?

[@MobileCarMechanic]

It doesn’t matter as long as the screens have the proper connections!

[@alessandrodelsignore3283]

It just arrived and it works. The only problem that the left side of the display is cuted… with the old one i could see everything on the left side. Do you know how to change?

[@ismaelguzmanlinares2854]

Dónde consigo esta pantalla?

[@MobileCarMechanic]

Screen 1 - 8.4 Inch Screen - amzn.to/45QHGOM Screen 2- 7 Inch Screen Non-Navigation - amzn.to/3PwhL9X

[@devrceb]

Where did you get the LCD from?

[@MobileCarMechanic]

Part - 8.4 Inch Screen: amzn.to/45QHGOM Part - 7 Inch Screen Non Navigation: amzn.to/3PwhL9X

[@headspace182]

Thanks, man! Worked perfectly and just as you described. One problem: my new screen picture is not centered anymore. Any idea how to fix that?😢

[@MobileCarMechanic]

Might be a defect in the screen assembly as if the display was glued in off center to the glass.

[@michaelm1186]

Thanks, great video. Where can you get new screens?

[@MobileCarMechanic]

The link is in the description.

[@michaelm1186]

Thank you just saw that. Great video thanks again.@@MobileCarMechanic

[@ShadoxBoss]

THANK YOU THIS HELPED ME SO MUCH!!!!!!!!!!!

[@MobileCarMechanic]

Glad to help.

[@Tammayrend]

I have a 2017 Compass Trailhawk with an 8.4” screen. It’s given me issues for years and I have finally had it. The lcd acts like there is a loose connection or solder. When I hit a bump it’s fine but instantly has lines. I have sat on replacing it since it worked but had lines. Now I want to replace it and have had a hell of a time finding the right part. Must 2017’s had the smaller 7” screen and the dealership says $1400 for a new unit plus labor. I think not! Hopefully this video helps. I’m waiting on a new lcd now! Fingers crossed b/c I have had it!

[@MobileCarMechanic]

Let us know if it corrects the issue. This is my first experience with this unit and it’s issues. I know the 7 inch displays typically come on the non navigation units. Cheers!

[@Gavin_G01]

Did u figure out how to fix it?

[@Tammayrend]

@@Gavin_G01 Nope. Bought a new screen, have not put it in yet!

[@rx7drift27]

You could use a little di-electric grease at the base of the stands offs thatll essentially keep them "glued" in place and you wint need to worry about them consistently falling over

[@MobileCarMechanic]

Thanks for the tip. Cheers!

[@mr.brucks6452]

✅ No need to remove all the boards and cables. It is enough to unscrew the five screws on the back side and remove the frame from the display. That's it! you can already change it easily.

[@MobileCarMechanic]

Thanks for the info, Had a hunch but most likely separated it at the wrong spot.

[@1arix]

Thanks for the video. Where can I buy a screen?

[@MobileCarMechanic]

Here is the link: amzn.to/3FKKylL

[@DanielLima-lj1ub]

Mudei o meu em 5 minutos era só virar ao contrário sem ter que tirar isso tudo

[@MobileCarMechanic]

Yep, that’s one way of doing it 👍🏽.

[@jwell1554]

Came here because dealer just quoted me $800 to replace the whole unit that’s not including labor

[@MobileCarMechanic]

That’s way to much. Hopefully my video can help.

[@zoofster7392]

Dude you are doing this all wrong This is not correct way to do this

[@MobileCarMechanic]

Thanks for the feedback. Definitely created more work for myself with part of the disassembly process when it came to the circuit board. Otherwise I would have to disagree for the remaining steps.

[@DanielLima-lj1ub]

🤣🤣🤣

[@MobileCarMechanic]

👍🏽

[@texasman80]

great video man thank you for the info I was going to take the car to have it done but I know I can do it now.

[@MobileCarMechanic]

Glad the video gave you the confidence to do this yourself. Cheers!