DIY 400kv Taser - Powerful Stun Gun At Home

--------------------------------------------------
In this video, I will show you how to build a powerful taser at home with simple parts, all for under $20!
--------------------------------------------------
Materials Used
Taser Module: tinyurl.com/59y59333
Tactile Buttons: tinyurl.com/2u78b4ee
Battery Holders: tinyurl.com/5n6x3kxv
Soldering Iron Kit: tinyurl.com/4axuw9us
Hot glue gun
Tape
Two small nails
x4 AA Batteries
--------------------------------------------------
If you enjoyed this video, feel free to leave a Like and Subscribe for more content like this! You can also leave a Comment if you have any suggestions for making my videos better!
--------------------------------------------------

[@timhofstetter5654]

Lie. There is no way that produces 400KV. Not even 40KV. 10KV, maybe 5KV, more probably.

[@enrique1305]

Ey dude, can you explain me why it can't produce 400kV of energy? I'm quite new to electric theory so could you explain me this to me please?

[@timhofstetter5654]

@@enrique1305 Because 1KV will leap a spark gap 1mm wide and 10KV will leap a spark gap 10mm wide and 100KV will leap a spark gap 100mm wide and 400KV will leap a spark gap 400mm wide and the secondary of that tiny transformer isn't 400mm wide so 400KV .would just leap across the transformer internally, causing a short circuit and destroying the transformer. The transformer isn't even 40mm wide, and the secondary wires aren't kept 40mm apart so even 40KV would arc inside this "taser" thing and destroy the batteries. Remember, a leaping arc can use random metal objects as "stepping stones", so the only gaps it really needs to leap in this case are wire-to-battery and battery-to-battery. That's a very short gap... and it doesn't leap there so the voltage cannot possibly be very high. In a 400KV system, you need to keep everything in the secondary path at least 400mm apart and prevent any metal between the secondary wires or you'll get arcing where you don't want it. In addition, you really need corona ribs everywhere to prevent electrical short paths through dust and oils on surfaces. Every automotive ignition system has corona ribs like that everywhere, and automotive ignition systems use only 20KV to 40KV. The spark gap shown at 3:04 is only about 5mm wide, which tells me that this little transformer probably prodoces a real-world secondary voltage of about 5KV with a 6V input... a mere 1:833 winding ratio.

[@timhofstetter5654]

@@enrique1305 Also... please read Anthony Garofalo's 1-star review; he actually measured the output voltage at 10KV.

[@Trainingtofailure]

​@@timhofstetter5654but why did it create plasma and lot of air when I connected 4 super heavy duty camelion batteries

[@Trainingtofailure]

​@@timhofstetter5654 I measured the distance and it created plasma within 1 cm gap

[@beffgur]

Thx so much I’ve been wanting to make decently powerful arcs forforever

[@patrickthaulo8086]

Thank you very much this is a great defender

[@lajoslengyel1142]

spot. Great content my man

[@chronixgamingferret6960]

great tutorial couldnt belive it worked ty

[@samkoaugust]

muss man die roten drähte verbinden ?

[@petrhafan1265]

Thank you man for sharing this stuff

[@DaSlotho]

heres mine that i made kzbin.info/www/bejne/bGjPan-MmK6Eb5I

[@Tab4Lenevo-mw4cg]

Tysm it helped me alot cuz one of my friends is beating me up at my college so i stunned him and it work 😊 tysm

[@elyaabe.inventions]

Good and wonderful work. I wish you success in your careers. Thank you for this beautiful dimension

[@DaSlotho]

heres a Bigger n better one kzbin.info/www/bejne/bGjPan-MmK6Eb5I

[@xpro3199]

Very good brother😁

[@metalmedic32]

Works 100% nice one

[@DaSlotho]

heres mine that i made kzbin.info/www/bejne/bGjPan-MmK6Eb5I

[@metalmedic32]

@@DaSlotho kzbin.infod1FQX7OPs-g?feature=share nice I did this with mine haha

[@riass_mystarrr239]

Thank you for this currently going to school and there is alot of kidnapping in the Philippines and i needed this🙏🙏🙏

[@creativecore2887]

just don't bring it if its against school policy

[@JeniviveBersabal]

me 2 im in philipines

[@wasabipaste672]

me 3, this is very useful

[@Lee.Davis_onesandzeros]

Me 4

[@KaempferIndustries]

me five👍👍

[@youtubeworkshop3174]

Which capacitor you've used?

[@stalnos3581]

how to make taser: step one: buy taser. step two: connect battery congratulations

[@nobodipsarkar6554]

good very good idea dene ke liye

[@xandermarshal6584]

New coil plug for my bike😃👍

[@danielbassa2354]

what determines the distance between the prongs how would you increase the distance

[@olhahaiduk9992]

Soft working!

[@Bianchi77]

Creative video, thanks :)

[@mechoman8443]

When I wire the 2 black wire to the button it goes off instantly, I have the 4 leg button. What do I do?

[@creativecore2887]

i belive you have to connect the wires to the legs on the same side

[@creativecore2887]

courses.ideate.cmu.edu/99-355/s2022/images/tactile_switch_wiring.jpg

[@bobbyjheyhey9575]

Connect all your wires and switches and what not together first, then remember proper plyers they ground you and yeah. Always positive first I was told. As with no ground or negative there's no current atm until you connect ALl of the wires. Aka the negative last ground is so device doesn't become scary and have a pulsating current going to through the devices you decide to Amp up your use and use more power. It'll help you respect electricity and not be a dumb ass or a pussy....

[@johntimlin6664]

Both black wires on one side of switch / grn on opposite side of switch ( make sure wires are not touching ea. Other or u will have direct contact which will bypass the switch.

[@josephmobbs6600]

Its opposite side output btw

[@train4905]

Superb

[@TheHeat55]

Great video ! Question for you, I have just bought 2 Chinese 908 series tasers from Wish and they both don't discharge. The flash lights work but not the tasers. Any ideas ? Appreciate it ! 🙂

[@creativecore2887]

I'm definitely not the person you'd want to ask about this because I don't know a lot about circuitry and stuff like that. id guess that you just got faulty ones because they're from wish. do they make a whining noise when you try to activate them?

[@TheHeat55]

@@creativecore2887 Yes, they do !! ??

[@creativecore2887]

@@TheHeat55 I believe the terminals may be too far apart, so the module can't make enough voltage to arc across. A larger gap will make louder, but less arcs, which means lower frequency. If the module can't make the arc, I believe it will start arcing internally. Because all the components within the module are close together, the arcs happen more frequently so you get a whining sound. I'm not sure exactly what's causing it, but that's my best guess

[@creativecore2887]

@@TheHeat55 try using a spoon to touch one of the prongs and move the spoon closer to the other one. Maybe The taser needs a closer gap

[@TheHeat55]

@@creativecore2887 Thank's a million CC ! I have 3 of these tasers, they all worked for a day. The seller wrote that you had to charge them for 10 hrs before they were first used. They all have the same little wire for charging, I'm wondering if it's not a charging problem. Were they over-charged ? The charging light doesn't turn green when fully charged. Anyway I'll try the spoon thing CC. Thank's again for the detailed help 🙂

[@user-hn2do1xc9k]

Did you put all the red wires together?

[@ayahsadam9817]

Great sharing

[@DWALLPAINT]

Very professional work, Thanks my friend ❤️❤️❤️👌👌

[@fatnafifi1227]

ثثج٨غنلنيمامةتغتبعي٩٧٤٩بع٧قبابعلغذوفب٧قتقلنهف٩ي٦دخفيقخيغلت٩٦قفنكعقحف٧حق٧فعحلغخخف

[@hadiyyatm967]

skema nya Mr rangkaiannya bagamana

[@antoniosimoes9178]

lol

[@emky]

Hi, at 2:43, can you explain to me where these black wires come from that need to be soldered to the button? Are these the wires that “come out” of the batteries? Thanks.

[@creativecore2887]

yes, these wires are the negative wires coming out of the battery packs

[@mardulles5420]

Good 👍👍👍👍👍

[@everythingacoustic6736]

What if u connect 4 of those H.V.G’s together ?

[@rebelwarebikingog]

What is the piece you put on the battery pack is it just to be a handle

[@Bryan.schetz]

No, that increases the voltage of the batteries, it is a taser module, the link is in the video description, it takes 3 to 6 volts and 2 amps for the module to work correctly

[@kamelnazar-instructionalde9740]

ice its actually working, im suprised

[@beluga6627]

what was the cylindrical black thing that u connected with the batteries

[@Ninetalesbeyayenasky]

That's called a tranformer

[@derrickmanley3647]

What is the black thing you put on top of the battery packs

[@monkey_scare]

voltage booster

[@antoninfejfar4653]

How many ohms is that resistor, thank you

[@user-iy2mv4dw2h]

will two 3.7v battery's work pleas reply

[@Yeklifestyle]

What’s the name of the black thing with the green wire …. That the button was placed on

[@creativecore2887]

a taser module

[@RayceVR]

@@creativecore2887 6v?

[@tahmidhossain8144]

It’s a boost converter

[@hasanwh8610]

capasitor 6v to 400kv

[@darusica1320]

Where i cand find that voltage module?in toys i cand find?

[@henrysoenneker4921]

Great video I showed it to my dad and he said it was a good but the solder job was absolutely horrible

[@vintopin]

What soldering? 99% of the time he used hotglue

[@johnbeitz]

You either solder or use hot glue

[@florobongaos5570]

What called that black connector?

[@EduardoSouza-mx5wb]

Que componente eletronico você colocou com a pilha ? e qual o valor ?

[@creativecore2887]

Todas as peças usadas estão na descrição

[@RayceVR]

@@creativecore2887 no they are not

[@creativecore2887]

@@RayceVR this is the description of the video -------------------------------------------------- In this video, I will show you how to build a powerful taser at home with simple parts, all for under $20! -------------------------------------------------- Materials Used Taser Module: Tactile Buttons: Battery Holders: Soldering Iron Kit: Hot glue gun Tape Two small nails x4 AA Batteries -------------------------------------------------- If you enjoyed this video, feel free to leave a Like and Subscribe for more content like this! You can also leave a Comment if you have any suggestions for making my videos better! --------------------------------------------------

[@orlandoperezmexico174]

No jeje, osea que elementos se usaron hno??

[@emielmaerivoet9722]

explenation on the components please. I dont know what the cilinder is

[@XenyQ_OFF]

You buy it 300kv stun gun module it cheaper than premade stun gun

[@XenyQ_OFF]

Cool

[@joxr2569]

What is the black thing on top of the batteries?

[@Bryan.schetz]

É um módulo de taser está o link de compra na descrição

[@ronnie0films]

what did you put on the front of the battery packs?

[@caseyoveracker26]

I was wondering the same thing

[@creativecore2887]

the taser module

[@EduHeroVision]

Can you also use normal on-off switch or does it have to be tacticale buttons

[@MilkBugs]

any switch my friend. on/off toggle, Decore,.. lol push button. i believe this module will shut off after 20 sec

[@flgbtandfukbts2977]

​@@MilkBugswhy will it shut off?

[@Bryan.schetz]

They will download, but it won't be as fast as he said

[@mrs.hebahesham3284]

nice

[@chelusingh1354]

Nice

[@yvanmorazzini621]

C quoi le truc au dessus merci bien à vous et français super merchi

[@Grassislong]

Is there a safe why to measure the voltage on this? My multimeter caps at 600v

[@creativecore2887]

i got no clue, sorry

[@convictions831]

What u using

[@xxsnipesxx9204]

Can you use hot glue to connect the cables instead of soldering?

[@creativecore2887]

Not recommended

[@arlenegwatson]

Sweet

[@eduardodionicio2706]

Cuáles son los materiales?

[@user-co9kj5sv9f]

WOW❤

[@lukeveen3367]

What is that black thing on top

[@user-kj3yc2mo6c]

Y si tengo una caja de cuatro pilas funciona

[@mdahad9523]

Nice amijing

[@user-cc3yu2ti9n]

它的电流是多少啊？

[@mirosawadytkiewicz8965]

Fainy wynalazek

[@creativecore2887]

im not sure what that means but thank you

[@GuemihiSofyan]

وين تجي لبيسا هدي

[@abozhrakase]

What is it or the name of the piece that you put on top of the batteries

[@SuckySuckMyBalls]

I was wondering the same

[@ardau.1094]

hey , i have a switch with 4 legs. how do i solder that?

[@user-cc3yu2ti9n]

你这头像有点。。。。

[@D5arkk5028]

What’s the black thing?

[@hazardplayz1]

What’s the brick black thing on top of the battery’s 😅

[@creativecore2887]

taser module

[@jimboynuer5898]

I directly connected the volt booster to a two 1.5v Double AA battery to test it, it work but in the 2nd attempt, it didn't and it seems that it doesn't have a continuity when i test it with multimeter. Can someone explain to me what just happened? Is it possible to fix it?

[@creativecore2887]

I honestly don't know what could've caused it to fail, but these taser modules are very cheaply made and very finicky so it probably just died. I would recommend using 5-6v though which would be 4 AA batteries.

[@jimboynuer5898]

​@@creativecore2887so using an inadequate input voltage such as 3v would likely broke it? And probably because it was "made in china". 😂 But does your teaser module still working with 5~6v batteries? If does maybe I'll try that if I ever salvage one in the Garage.

[@gfitforithsitloywmotwgp8542]

Will it work if i put 2 batteries instead of 4 batteries

[@creativecore2887]

Probably, but just either weaker arcs, or less of them

[@JovenCahigus-ow4lh]

ano po yang black na pinatong?

[@arteclegane69]

El rectángulo negro de lo último que es??

[@syf_tws1777]

Where can I buy an electrical transformer?

[@Bryan.schetz]

What is used in the video is in the description

[@robertocrous3807]

ABOVE THE BATTERIES, GOES A BLACK TUBE GLUE WITH SILICONE AND ABOVE IT HAS THE TWO PINS WHERE THE VOLTAIC ARC IS FORMED... WHAT IS THAT CYLINDER???

[@creativecore2887]

taser module

[@robertoenriquelonzari250]

Lista de material , o somos adivinos

[@Tambuzai-vq9hz]

What was that in the frant

[@coachgeo]

how would one control output ??..... example if this was a survival hunting device with probes and wires on a forked spear such as for use after netting an animal ... in order to subdue it.. Obviously you would subdue squirrel at lower voltage you would say a wild pig so you need some way to modify the output...

[@creativecore2887]

get a resistor for the battery or a voltave control knob.

[@vuxirz3203]

im a bit confused so we dont need that red wire?

[@winnitooo]

you need to connect the 2 red wires so the battery connects to the transformator thing

[@jameztrainwreck2681]

How does one get a 'taser model'

[@creativecore2887]

you can get them online

[@johnbeitz]

Before you assemble anything you should understand how the parts work. Then next step is where they go. It will come together like magic and reality.

[@orlandoperezmexico174]

Es que como pasas a creer eso hee!!

[@firemyster4707]

would u recommend using a 9v battery?

[@creativecore2887]

a 9v battery works but isn't recommended because most taser modules are only rated for 6 volts. You could throw on another AA battery and it would probably be fine.

[@user-ec1ek9gj2l]

Does it work whit a seesaw button? Yes or no?

[@user-ec1ek9gj2l]

Can a nyone tell me?

[@creativecore2887]

it would but if you drop it it will stay on instead of automatically shutting off

[@user-ec1ek9gj2l]

Thanks

[@NikaAraviashvili]

Where did the high eletricity came from

[@jeremywebb4489]

Where do u get the taser module from??

[@godgajet6763]

its high voltage convertor

[@creativecore2887]

amzom

[@Ibrahimadiarra24]

Hello, that's interested and diabolic 👿👿👿💀☠️💀😱😱

[@YTGAMERSITAMARHI]

SAR black rang ka hai o Kaya hai uska Bata dijia

[@tommygun9516]

Why wouldn't you use a 9 volt ?

[@creativecore2887]

the taser module is rated for 3-6 volts

[@ankurpardhan1382]

Is bhai reply jarur Dena kya aisi gun banakar bhej sakte ho

[@creativecore2887]

मेल में पसंद है? mel mein pasand hai?

[@SSL22222]

The taser goes on as soon as i put in the batteries and the button doesn't work? how do you fix that

[@creativecore2887]

does it turn off when you press it?

[@SSL22222]

@@creativecore2887 i've fixed the problem, the button has 4 legs, and i connected two leg on each wire, when you're only supposed to connect one on each

[@mechoman8443]

@@SSL22222 when I connect the button it goes off straight away?

[@raniduwelagedara3017]

mention the things required to make these with separate names my friend 😏♥️

[@SALEM.ALTAMiiMii-KSA]

👍👍👍👍👍👍👍👍👍

[@daltoncraig8300]

what is that black thing you brang in at 1.30

[@creativecore2887]

taser module

[@marytitus4579]

What is the name of the button

[@creativecore2887]

momentary tactile button www.amazon.com/QTEATAK-Momentary-Tactile-Button-Switch/dp/B07VSNN9S2/ref=sr_1_4?crid=2KOMLUI55U0F1&keywords=tactile+button&qid=1655408229&sprefix=tactile+but%2Caps%2C774&sr=8-4

[@tuancao9727]

Bao tiên môt cái vây

[@desktopantec2290]

Why would you at the battery in paralel instead of series, even though the module you used is used made for 6v. this way you have 3v with a longer battery life.

[@andreascolari8493]

I don’t get it can you explain it to me

[@desktopantec2290]

@@andreascolari8493 the batteries are in parallel, this means that the voltage is not stacked. If you have 4 battery and you connect them in series the voltage adds up so you get 6 volt because 1.5v * 4(batteries) = 6v. The configuration in the video has 2 batteries in series (so 3v) and the other two also in series, however the two pares are in parallel so instead of adding 3v to 3v to make 6v they keep the voltage low while providing a higher current. The device is rated for 6v so it is better to use 6v instead of 3v

[@timknoch7308]

bro i am not getting any tracks into my soft how is that possible

[@creativecore2887]

what?

[@kyoku9705]

Can this electric gun make someone faint?

[@michelemendolicchio2206]

how much is dangearous?

[@michaelross4644]

Any way I could get a list of items used?

[@creativecore2887]

the description got messed up, the links should be there now

[@user-tb8eb9eb6r]

Where can I buy a taser module?

[@creativecore2887]

i got mine on amazon

[@user-tb8eb9eb6r]

@@creativecore2887 thanks please URL

[@boyhenyo4431]

very simple battery - switch - transformer - electrode

[@SXModez]

I have a question when I build can I cover the whole thing with black electrical tape and leave the button out only and do you have to use the soldering iron?

[@SuckySuckMyBalls]

You can actually just tape wires to the batteries, no plastic needed and then cover the whole thing in electrical tape if you want to. You wouldn't even need actual wire and the springs from lighters and pens would also work as wire of covered with electrical tape

[@SuckySuckMyBalls]

And soldering iron is not needed, you can melt tin with a lighter and a nail. You can also just tape the wire with electrical tape if needed but be careful, it should connect but it won't be as powerful. Also it might cause a fire if not done properly so it has to connect

[@SXModez]

@@SuckySuckMyBalls I did it with electrical tape I followed the instructions sadly it didn’t work

[@makswinn]

400 kV = ~40 cm spark!

[@ragilsapurta9946]

Atas batu mesen bekas apa