DIY 48 VOLT BATTERY BANK TIED TO A SUN-1000GTIL2-WIFI PLUG-LD GRID TIE POWER INVERTER WITH LIMITER

[@francescobianchi9036]

Interesting video, question what is the maximum input current that the inverter can withstand, I read the manual but I couldn't find it, only the Watts and volts

[@jwsolarusa]

There are two versions, 60v and 90v input

[@jwsolarusa]

LIKE👍 SHARE & SUBSCRIBE

[@jwsolarusa]

GRID TIE SOLAR INVERTERS: kzbin.info/aero/PLSNjIRSnUPDL4fWuaEW_gOZc-bQFuWZvV

[@leamyelectricinc1]

Whst is the input voltages to the GTI your using? 22-60 or 45-90v?

[@jwsolarusa]

22V-60V Thanks for watching. SUBSCRIBE LIKE👍& SHARE

[@leamyelectricinc1]

@@jwsolarusa thank you. Yes that's what I thought. I have a 45-90v input 1 kw GTI. Getting ready to add a battery bank for night time use. Was just checking around if anyone has used a 48v bat bank with a 45-90 v input on the 1 kw GTI's. I appreciate your quick response. Subbed!!😁

[@jwsolarusa]

@@leamyelectricinc1 Here's a link to my videos series. GRID TIE SOLAR INVERTERS: kzbin.info/aero/PLSNjIRSnUPDL4fWuaEW_gOZc-bQFuWZvV

[@bostjantrancar9605]

Excellent video as always 👍👍

[@jwsolarusa]

Thanks

[@WIZ56575]

I have 4 of these same types of types of tigrids and verters but nowhere can I find on how much amps can run through these machines we know how much voltage can run but how much amps can you put through these machines I want to know if I can take a 48 voteight 8 vote battery called Reynold rhino from big batteries Which has 276 AH Is that too much amp hours or is this OK I can't find in the destructions or any KZbin videos to tell the capability on how much amperage can run through these machines

[@jwsolarusa]

Thanks for watching. Here are playlist on how I installed these Gridtie inverter limiters with battery backup system from start to finish. Don't forget to LIKE SHARE and SUBSCRIBE. SUN-1000G2 GRID TIE POWER INVERTER WITH LIMITER: kzbin.info/aero/PLSNjIRSnUPDJ1Cp3JTPumQ7e8fehjCFqv GRID TIE SOLAR INVERTERS: kzbin.info/aero/PLSNjIRSnUPDL4fWuaEW_gOZc-bQFuWZvV GNB SPRINTER SEALED AGM, FLAME RETARDANT: kzbin.info/aero/PLSNjIRSnUPDLi1N3G6rlsQSXuXz8fRjdd

[@cliffBMRC]

Can you attach 48V battery bank (100AH each) directly to the + and - terminals of the SUN-2000GTIL2-H ?? Please advise...Thank you. I connected 48V battery bank to the + and - correctly and blew the unit??? Any suggestion. My unit is the 2000W Grid Tie Inverter Power Limiter LCD Display DC50-90V Solar Input AC185-265V Output SUN-2000GTIL2-H

[@jwsolarusa]

That's exactly what i did. LIKE SHARE & SUBSCRIBE SUN-1000G2 GRID TIE POWER INVERTER WITH LIMITER: kzbin.info/aero/PLSNjIRSnUPDJ1Cp3JTPumQ7e8fehjCFqv GRID TIE SOLAR INVERTERS: kzbin.info/aero/PLSNjIRSnUPDL4fWuaEW_gOZc-bQFuWZvV

[@meassavuth4649]

Why he did not unswer with a correct question ??? The question is : Can you connect with 48V , 100AH each ???? * If can , just say YES * If can not , just. say NO ,

[@robhobbo8669]

If the limiter was connected and the load was 50w would it only be draining 50w from the battery or would it still be draining 230w? I'm sorry if it's a silly question but I'd really like to know.

[@jwsolarusa]

If the Limiters was hooked up, it will compensate the house load. There's a another option on the settings that allow you to adjust the threshold you want instead of compensating for the total wattage demands

[@offgridwanabe]

How much battery power does it use? I was thinking of hooking up a few enphase inverters to batteries for the night

[@jwsolarusa]

Not that much

[@francescobianchi9036]

Hi, maximum input current for your model ?

[@jwsolarusa]

What do you have

[@francescobianchi9036]

60v @@jwsolarusa

[@offgridlivingstlucia8865]

Good video

[@reneenietes]

Gudday! Can it be used on a 24volt battery? Tnx!

[@jwsolarusa]

Yes this particular model. Please don't forget to LIKE SHARE AND SUBSCRIBE for more projects coming your way. I Just uploaded new video. Check it out and tell me what you think.kzbin.info/www/bejne/fKPXeoudqtuGpZo Cheers.

[@Gensifull]

Hola Hermano! No entiendo tu idioma! Tengo el mismo inversor con limitador. Lo tengo conectado a dos paneles y no se si puedo conectarle las baterias a la vez. Muy bueno el video felicotaciones!

[@Gensifull]

Soy de Argentina! Podrías explicarme como conectar las baterias en simultaneo con los paneles?

[@jwsolarusa]

I am sorry......🤔 but don't understand what you just said. I wish I can have you translate your comment to English so I can answer your questions my friend. Thanks for stopping by and hope to hear from you sooner and have a wonderful day.

[@Gensifull]

jwsolarusa Hi brother! I do not understand your language! I have the same inverter with limiter. I have it connected to two panels and I do not know if I can connect the batteries at the same time. Very good video congratulations!

[@Gensifull]

jwsolarusa I have the same inverter connected with two panels of 260w in parallel and I would like to add batteries to be able to use the stored energy at night. Is it possible to make the mixed connection?

[@Gensifull]

@Tes Tos muchas gracias por tu comentario! Sólo me falta saber como cargarlas y a las vez conectarlas je

[@IceAge20017]

You should be getting about 1000 watts from those batteries, not 230.

[@jwsolarusa]

Not Vladimir Putin This was a quick test and the house wasn't demanding heavy load at the moment. Please watch my second test with a 60 volt battery bank experiment on the link below. I suppose you will like it. kzbin.info/www/bejne/jWnSnWSshMeths0 Thanks for watching buddy.I have SUBSCRIBED to your channel. Don't forget to SUBSCRIBE give us a like and share my channel and have a wonderful day.