DIY 70200mAh Power Bank Wireless Fast Charging QC3.0 6 Port

How to DIY 70200mAh Power Bank Wireless Fast Charging QC3.0 6 Port
- I Am using
+ 15w Wireless Charger Module + Type C
+ 27pcs 18650 2600mAh battery
+ 6-35volt 4 Port QC 3.0 Fast Charging Circuit Board
+ Samsung note 20 Ultra 5G box
+ 3S 12.6V 40A Lithium Battery Protection Board with Balance Charging
+ 3S 12.6v Meter Lithium Li-po Battery
Thanks for watching, Have a great day !

[@showrovgamer1829]

Love from bangladesh🇧🇩🤗

[@bd0118]

Vai apni o onar video dekhen

[@sajidmohammad3190]

@@bd0118 Me from 2016

[@geyrlanc.santos6095]

BRICKS

[@vloodle2377]

​@@geyrlanc.santos6095bro💀

[@satafiaofficial]

amio dakhi

[@gonzalorolon1342]

I don't know if I'm more amazed by the battery or the phones this guy has

[@gamingmark54]

same

[@Hendrix_2679]

same to me i fell like its show off mahn

[@TheSpotify95]

Nice build, but it's not actually 70,200mAh. It would be 70,200mAh if you used them all in series (3.7V 70200mAh, 259.74Wh). However, since you're using a 3S9P pack (3 in series, 9 in parallel for 12.6V) you only have 9*2600 = 23,400mAh capacity, but the energy is the same (11.1V 23400mAh is also 259.74Wh). So might be a good idea to use Wh instead of Ah with multiple cells in series.

[@macauleyc64]

All in parallel when you quote "70,200mAh if you use them all in series" it's probably why they sell ebike/escooter batteries with 100,000mAh when there about 10aH because the translator doesn't know the difference and not done his research

[@kongmeurn38]

Doesn't connecting it in parallel give it more current thus more Wh too? If they were all connected in series you would need a bigger BMS and it will have a overvoltage for that board. Learn more about batteries and how they multiply.

[@abdulmuhaimin5274]

Yup. Definitely it's a clickbait.

[@x-gamessimulator1067]

​​@@abdulmuhaimin5274 true

[@Shan_Shah]

He used 27 batteries, so 27×2600

[@jasonvoorhees3282]

I would have recommended putting a small gap or insulation between the battery BMS and the 18650 batteries. I have a similar BMS, and when the balancing mode is being activated, the resistors heat up a lot. It would be wise if such heat source isn’t in direct contact with the batteries itself.

[@Tonyplat98]

Yeah there's a few mistakes he made in making this pack but overall it's a good DIY project for the hobbyist. BMS does heat up especially when charging and balancing the cells those can get very toasty it being right up against the cells is not a good idea.

[@BedTimeStories-New]

Ok now get lost

[@prasadksr6459]

i agree. A bekalite/hylam/teflon piece of 2 mm thickness will do the job. it does not get heated up at all.

[@athrun9800]

Hahaha. not a 70200mAh. This is 3 series x 9 parallel power bank. (3 batteries in series x 4.2V per cell = 12.6V) (9 batteries in parallel x 2600mAh per cell = 23,400mAh capacity)

[@GreenPlanet30]

he should have written capacity in Wh

[@dimitriszoitsoudis3125]

I doesnt matter how he connected the batteries since he is using a module that converts the output to 5v.

[@SSSKUTER]

this is why i don't like measuring capacity in Ah. He got the 70,2Ah value because he just added all the capacities together all of the manufacturers do it just for marketing if you calculated the capacity in Wh the value would stay the same no matter how he connected it. if you calculate the capacity of the power bank he made in Wh you would get 252,72Wh (3.6x2.6x27) which is still a lot imo

[@LexiAi-v8z]

You don't need 12 v to charge a phone you just need 5v , the rest of the voltage also adds to the capacity with conversion losses. What you're saying is true if you use it only as a 12v battery.

[@LexiAi-v8z]

By your calculations 23000 mah x 12v ÷ 1000 = 276 wh (actual capacity) Now for 5v , 276wh ÷ 5v = 55 Ah or 55000 mah capacity.

[@bukkachandram2366]

Advanced congratulation for 6 million subscribers to creative channel

[@zikoo2255]

😍😍😍Mashallah, you have all phones, Galaxy Note, the best phone, even Note 20 Ultra

[@SharvilSawargaonkar]

I bet you have the lowest end Samsung smartphone

[@sksaimun8139]

Love from Bangladesh🇧🇩🇧🇩❤❤❤

[@Imgraduatebalak]

हार तो वो सबक है जो आपको बेहतर होने का मौका देगी....🌟 #motivation

[@naimuddinsourav]

I think it would be more good if you do this with 3D printed/pvc casing and some touch of epoxy resin. Take love from Bangladesh🇧🇩❤

[@morven7369]

在纸盒贴纤维网，刷环氧树脂，加固打磨喷漆，类似造船工艺，这样使盒子更加牢固和美观。

[@imanali1532]

What a finishing bro work is very good 👍

[@murariyt9757]

Watching from India 🇮🇳😍

[@pierregrancher7881]

Bonjour de France. Très belle réalisation... et très utile lorsque la famille vient à la maison ^^

[@enriquelopez7050]

De Lyon, France, correct, le problème est d'obtenir les adaptateurs pour pouvoir les créer

[@ahmedelmowy2586]

Do you see how much effort they put in just for us

[@tracksray9542]

bit

[@ychongy]

People work for you? 😄

[@MeMelon4u]

Cringe comment

[@neloycreation3160]

Not only us but also his content🙂

[@mukwayabaker3434]

Who cares

[@chandramouli.JLM2]

Love from India❤🎉

[@Movies_Chennal]

Love from India ❤

[@Aeywos]

Love from Bangladesh🇧🇩🇧🇩🇧🇩🥰🥰🤩🥰🤩🥰🤩

[@Etienne85]

At the end is that the charger you plugged while still charging, meaning it would also work as UPS?

[@CAPSTONE.]

He should have his own company ❤️❤️🔥🔥🔥🔥🔥🔥

[@macauleyc64]

He does, it's this yt channel. You seen the number of views and ad revenue he would be getting

[@gelt0]

between the bms and the batteries use a thicker cable, in the worst case you could start a fire by consuming too much amperage, it would also add a bit of dissipation to the BMS, it can get quite hot

[@yucelkoycu2609]

Çok güzel oldu ellerine sağlık. Sizin orda yaşamak yatmış her türlü inkaniz var ne mutlu size

[@abdulwahid8579]

Great job with all the best information and knowledge also you have good tools and experience 🤠

[@dhikaagus7083]

Love from indonesia 🥰

[@falconfawwaz9181]

That's alot of voltage from those lithium batteries, nice job👍

[@kongmeurn38]

Only 12 volts. Some are connected in parallel to last longer and the packs are connected in series to step up the voltage. Check the multimeter.

[@rolandwilliams5698]

It looks like a nice build Great Job, but I’m just a beginner and maybe that’s why even if I slow it down or pause your not making it easy to see how your wiring the build I mean it’s obvious you know what you’re doing but I thought you was sharing the build. I want to try the build but don’t want to get stuck at the end. Plus you didn’t even mention the charging plug you used at the end nor is it in the supply list.

[@newnanban2598]

You are professional skill is amazing

[@Ghost_70026]

Be sure to do the unboxing and review of S23 ultra when it comes out

[@talha302gamingyt2]

I love you video and your projects

[@moviegharcinema]

kzbin.info/www/bejne/qGOllXqgr62Mj5I

[@charlottewilliamcover3568]

I see a 3S9P pack here... 9 x 2600 mAh = 23400 mAh. How do you count your 70200 mAh ?

[@ALL_ROUNDER.509]

Love from Bangladesh ❤

[@ambrangtangkil1422]

MANTAP 👍 SALAM dari INDONESIA 😘

[@billie1544]

Nice, hope you are going to make solar power bank with more capacity. Very interesting and people.can save the mother earth.

[@denim47gaming]

Solar powerbanks are possible. But the efficiency for the panel size is not great so if you want to not charge for 3 monts then you need a bigger solar panel.

[@rupertoranada5109]

mine.. Im always watching with your videos

[@default19in]

Most creative.

[@chotu374kumar]

Hello bhai aapka main bahut video dekhta hun Delhi se main aaya tha Delhi mein pahli bar dekha tha aapka video FIR bahut achcha Laga tha ab main Bihar a Gaya Hun jila Samastipur to fir bhi aapka maine phone per search karke video dikhayen aapka naam kya hai koi video mein bataiyega please

[@prodhantopr777]

This is extreme, salute man.....

[@debasismuduli5010]

Wireless charging ka fayda kya hai jabki usko ek hi jagh rakhna padega. Usse acha toh wired wala hai jitna lamba wire utna dur move kar sakte

[@uzairakram6074]

can you please link the parts that you use in description. it would be really helpful for us

[@deathwingsatanic5736]

There is no gap for the batteries in between. It will overheat. Eventually melting the interior.

[@Funistudo]

NICE Video

[@PatientMuka-jn1cl]

Your genous

[@mdisrail7237]

Thanks Aapki video buhut achchi hai Lekin is video me koi jankari wali chiz nhi hai ham logo ke liye Ham logo ne sirf ye smjha hai ki ise aapne kese bnaya Or ham log kese bnayenge ye aapne nhi samjhaya To mehrbani karke samjhane wali video banaya kijiye

[@viejo.cotilla]

No me cansaré en decir que eres maestro enseñando todo lo que sabes 👍

[@JaviersDIY]

Wow. I really love this channel

[@human7153]

Such a clean work ❤

[@salvoracer3176]

Nice!

[@pinkialam263]

I Love Bangladesh ❤

[@Robert-Kuhn]

Nice project, I love it! Good job bro

[@ДмитрийЕзерский-ъ4ь]

каким образом получилось 70.2А.? может разделить надо на 3

[@amriamri6732]

Mantap bang lanjut terus bang

[@re-fix9678]

Good❤

[@motta3838]

Great job bro ! as always.

[@sahildua4659]

For sanding u are using dremel or ingco

[@creavity651]

Nice video sir love it all video

[@yarbazkhan2282]

Good job brother

[@excillisbank2611]

Magnifique !😍

[@moviegharcinema]

Hello friends happy 🙋‍♂️❤️🙋‍♂️

[@creavity651]

Love from india

[@FBCxUNKNOWN]

No fans, over surge protection or heat sensors. 100% safe

[@sisigamj]

Good job‼️

[@Thony_Eraser]

Great superb😊

[@ΚωσταςΣχοιναρακης]

Great Video, Great Build, Awesome!!! Please if possible share links for the parts! Thank you in advance

[@rynohugo8718]

Always curious what is it with the pinky nail ?

[@felipemonteiro1064]

esse carregador é poderoso viu, consegue carregar 5 aparelhos de uma só vez

[@albertovilela9015]

Hello and nice video 👍 i try made it this batteries with more capacity 18650 battery high quality 19800mah 3.7v 18650 batteries li-ion rechargeable battery ... Its ok i go if i made it that battery ??!!

[@Ashura_smp]

I have 5 batteries of 18650mha 3.7v and I want to make a power bank to charge my cell phone I can use these batteries to make this power bank to charge my cell phone ?

[@EmonKhan-n8o]

Good

[@kccwithyou]

good job

[@armanrajofficialking8319]

Super video

[@lmrdt3491]

Nice video

[@mamidinaresh4053]

I love you channel

[@omarmohmmed]

جميل جدا الله ينور عليك

[@biasterff0851]

Love from mirudih

[@andreybashkirtcev7737]

Отличный девайс! 👍

[@markpiper5949]

All that work, just one question? Why would you not make it solar chargeable also, power does run out usually in the most awkward of places.

[@حسين-ج9ط7ي]

Great job, thank you brother. You are so talented

[@mj.taskinislamjahid5466]

Samsung Lover..

[@ggamers3406]

Wireless module is it support in any phone

[@Comrade_YG]

Yes

[@doityourselfsmddobcobsmdra8549]

absulotely not only wireless charging support

[@ggamers3406]

Ohh thank u so much sir

[@Comrade_YG]

@@doityourselfsmddobcobsmdra8549 which means yes

[@Dragonorder18]

You know, with projects like these, I've wondered about some box designs for where maybe you could hot swap out the battery cells by the sets. instead of hard gluing them. Just kinda like they were set in like AA batteries. Especially when using older cells like that. It'd be sort of a battery case then, where you take segments to check into which need changing after a time by the line, or by the block from time to time. So that way you are making use of the case longer than the cells. I realize it would mean making a bigger brick box, but that would simply be the exchange, and lower a bit of the risk of cell heating.

[@irisral3327]

כל פעם מפתיא אותי הבן אדם הזה 😄

[@kronostico]

Where I can get that spot welder machine from please?

[@CanalRelíquiaeRestauração]

Top

[@userprofinger]

Good job

[@chen06lar27]

Well done about to do one of this .... 👏 👍

[@yusufabdrahman592]

Good ii boss ✅✅✅👍👍

[@albertovilela9015]

Hello can i made that power bank it this batery Baterias recarregáveis do li-íon de 3.7v 18650 19900mah ???

[@sitansusekharpanda3431]

🙏🏻🙏🏻🙏🏻to ur efforts

[@odvipergaming9509]

Hi Bro love from india

[@SelebXposeOfficial]

i like

[@iGodbless]

У каждого же валяются вот эти вот все примочки...!

[@ContentCreator]

Excellent 👌🏻

[@mrnouman2000pk]

Just AWESOME...

[@AngelZamora-pk5zs]

Hello, sorry for that power bank, which module is recommended to install to put a solar cell in it and what capacity would the solar cell be so that it charges the batteries and if it is not too much trouble, send me by email the diagram of how to install the solar cell and the rest I would appreciate it very much, thank you in advance, greetings✋✋✋

[@kheeralamal9204]

Hello, where do you get all this equipment from?

[@JamilKhan-hk1wl]

From years of doing these diy works. You just get one by one when you need it. After a few years, you would pretty much have all the necessary equipments

[@kheeralamal9204]

Yes, it is true what you say, but it costs a lot of money, and this is not available.

[@ticketytoc7085]

@@kheeralamal9204 He lives in Vietnam parts are around and easy to get like he was living in china

[@mr.champat1447]

Price please

[@marcosmendez4661]

hello could you help me build mine where to get the materials I really like your videos

[@WolferAlpha]

This 70200mah written in the title is incorrect, I know that there are people who will say "it's equivalent" well, then use the universal unit for battery capacity equivalence (Wh) which in the case of this battery is 260Wh, it doesn't matter if it was mounted 1s27p or 3s9p would be valid for both cases, but not mah that each case has its capacity

[@racexine]

Those batteries are labeled in mAh in battery capacity, 2600 mAh each to be precise. Try buying 26650 lithium-ion batteries and see if there is a Wh label there.

[@WolferAlpha]

@@racexine to see the wh, just multiply 3.7 by the capacity in mah per battery, in the case of the battery in the video it is 11.1 x 23.4. Always use nominal voltage

[@racexine]

@@WolferAlpha I know that. I'm just saying that mAh is the standard labeling when you're buying li-ion batteries, so the title of the video is not actually wrong.

[@WolferAlpha]

@@racexine so explain to me how mah is added when connected in series, Wh are added regardless of the connection and mah only when connected in parallel, so yes, it is wrong

[@racexine]

@@WolferAlpha It is added when you're using a charge controller. Try discharging 2 pairs of similar batteries at the same time, 1 in series and 1 in parallel. Use a charge controller and limit the setting to 5 v 1Amp. I'll tell you, they'll both lose their juice almost at the same time.

[@rahuldas3458]

How much will the total cost for making this power bank Rs in INR ??

[@hematrajput9257]

Please share link of all modules sir I am getting trouble to find the products 🙏

[@sholadoyebabatundedaniel3249]

And me too am unable to buy the modules