DIY Axial Flux motor ⚡

[@TheAllisterwhiteside]

Great video! Looking forward to watching your others!

[@jochenderycke9211]

peter would be proud

[@Jim_One-wl4ke]

That’s awesome, will the 3D printed parts deform when the coil heat up? Thanks for sharing ❤

[@stijnsprojects]

They probably will, I was not able to test it with this version because I couldn't attach a large enough load to heat up the windings.

[@daveb7999]

Hi, I'm working on a hand crank (1:9ratio ), axial flux 3 phase alternator, 12 wedge shaped magnets per rotor half. Stator consists of 6 (18 awg) w/ 250 windings ea coil., sandwiched between the two rotor halves, similar to yours. 3 phases w/ bridge rectifier. I'm aiming for 16V DC stepped up/ down with buck/ boost. Plan is to charge 2 parallel rows of (6x) 500 F Super Capicators for16V (max) and a net capacity of 83 F. Incorporated will be L-ion battery bank for ~5V and an 18A AGM for 12V. Additional ports for for alternate DC Voltages/ Amps. Question: Do you feel as though the iron core has a favorable effect on your motor? Is cogging an issue? I have the option of using a ferrite core at each stationary coil, I wonder if it will help get slightly more efficiency using the cores? Thoughts?

[@stijnsprojects]

The iron core definitely has a positive effect on the working, it keeps the leakage flux to a minimum and it has a high permeability.

[@daveb7999]

@@stijnsprojects Thanks for the reply, it's appreciated.

[@amplitude2836]

very nice! can it also be used for angular positioning?

[@stijnsprojects]

Yes, the ODrive van do position control

[@gregstafford2155]

Great design low weight small inertia helps with mor RPM with less current. Look forward to your next update to this motor

[@seankelly5318]

Very nice, look forward to updates.

[@weird1012]

Noiceee, mabye try and make a alternator next, or make an induction stove and cook some stuff

[@Seaofjitsu]

Amazing videos 🎉

[@longaie316]

Can you make a 6-phase axial dual stator flux motor?

[@Cassandra_Johnson]

Just ignore that stepper motor on the bottom, folks.

[@Rsoeiro]

very nice! thanks for the video friend awasome

[@mikewalton7615]

Nice simple design and explanation. Have you thought about making a PCB stator?

[@stijnsprojects]

I choose to not make it with a PCB stator because I want this design to evolve into a powerful motor and there are already a lot of videos about pcb motors.

[@stefanguiton]

Excellent work

[@okoman90]

Nice work 👍

[@prerupa]

how to use odrives?

[@stijnsprojects]

You can find a video on how to use ODrives on my channel.

[@inno050]

Where can i buy these cad files

[@stijnsprojects]

You can download them for free, the link to GitHub is in the description.

[@LorinParker-rg9ij]

I have a design for you. 8 coils. 8 north facing over the coils on one side. 8 south facing the coils on the other. Evenly spaced between the other set of magnets. If spun manually to induction it will become self-sustaining! Acording to 5 A.I's