DIY Backflow Preventer. How to change it.

[@margaretschmidt4227]

Love the stone! With the logo on it

[@heavensmopars]

@@margaretschmidt4227 it is awesome, isn’t it?! This is the video you were referring to: 😃👍 kzbin.info/www/bejne/a4K0nWB4j9OJotUsi=6bPKyw8wVO23uwXn

[@rustandmagic]

Amazing it survives outside, would not last 3 years here, good work, after the plumber (retired professional) installed my boiler in the basement he told me to keep an eye for first day for any leaking, I asked if I should call him if I found one, he said "nahh, just tighten it more until it stops"

[@heavensmopars]

@@rustandmagic thanks. I thought I could save a few bucks doing it myself. Thought I’d try at least. Simple logic to just tighten it more right?! 🤔🤷🏼‍♂️ I had to replace the coupler and the plastic pipe. Tightening them only made them worse…too much buildup inside the coupler. I didn’t include that part in the video to keep it somewhat short. 😂👍

[@EYE_SPIDER]

Nice work brotha, great video!

[@heavensmopars]

@@EYE_SPIDER thanks, I appreciate that. 😃👍

[@KennethBrackett]

I'm not much of a plumber, but still pretty interested in seeing what you do with the Charger. Now you don't think you will get it done for the NNN it should take the pressure off to take your time and really enjoy the build. Life is to short not to have some fun along the way. You can always watch DDSS working on his junk for inspiration.

[@heavensmopars]

Since life happens and threw a ‘wrench’ into my plans, I obviously wasn’t able to get the charger done. So with the remaining time I have I am finishing putting my 70 Duster together for the no-name nationals. Hoping that I can make it… Then I will work on the charger again. I am way behind on my Charger videos… 😬 I cut the front framerails of the charger off and welded on a ‘new’ section. (Yellow 69 coronet parts car -see other video here: kzbin.info/www/bejne/gqS1oWqQqdV4jtUsi=GngacB0XmUNIQJI-) I stopped working on the charger at the rocker panel stage…

[@huck01955]

How is your Charger coming ? hope all is well with you .

[@heavensmopars]

@@huck01955 thanks for your support… it was doing great! Got the floor out, chopped off the complete front half of the car. That includes the torsion bar cross brace, both framerails, inner fenders and radiator core support, k member etc. I took the one off of the yellow coronet parts car and installed the whole thing already. Then Stephen and Jason came out and helped out. Now I have the passenger inner and outter rocker out of the Charger. Then I changed direction and now I’m doing the mad dash to get the 70 Duster put together for the NNN’s… 🤔🤷🏼‍♂️