DIY Bluetooth Speaker a built-in LED RGB VU meter

[@runarunkumar5173]

Very cumbersome and painstaking job. But you have done it. Kudos to your paitence.

[@DiyBoomboxLab]

Thank you for your feedback!

[@emansuherman3280]

Saya telah menonton kedua projekmu, suka, suka, suka. Kalo boleh request, untuk video berikutnya coba bikin box speaker 2.1 atau 5.1. thanks from Indonesia, Anda telah menghibur.

[@DiyBoomboxLab]

I have three videos that are almost ready. You'll see them soon. I will take your opinion into account.

[@Killerman3012]

The parts you used from 12:15-12:36 aren't in the part list. And the batteries you used and the battery holder

[@DiyBoomboxLab]

I will add the my parts list

[@DiyBoomboxLab]

Could you please clarify which parts you are interested in?

[@Killerman3012]

@@DiyBoomboxLab it's the thing you screwed in with the red and black wire and the silver button and black button

[@JuanManuel123ify]

Magnífica obra de arte.....Pero creo que el compañero se ha complicado en exceso en su construcción....Yo hubiera utilizado madera de pino macizo de un buen grosor...El amplificador de audio es ridículo para los conos de los parlantes o altavoces que quiere mover...No cabe la menor de las dudas que ha quedado espectacular compañero....Enhorabuena....Un abrazo desde Las Islas Canarias (España)......

[@DiyBoomboxLab]

My friend! You're right! The amplifier is weak. The material of the box is MDF 2.5mm. I showed my experience of creating boxes without using large and scary woodworking machines. The damping decrement of the MDF housing is very good. And the sound from the amplifier on the TPA 3101 is weak. I'll definitely make a video with a different amplifier. Thanks for your feedback.

[@Ssawekboomboxdiy]

respect from Poland

[@LetrelleVisions]

what are the wood hole sizes? also what are the other 2 tools you use to connect the wires?

[@DiyBoomboxLab]

I didn't understand your question. If about connectors, then I solder them

[@LetrelleVisions]

@DiyBoomboxLab oh thank you. But I was wondering what size the box is and the holes in the box if that isn't too much trouble.

[@DiyBoomboxLab]

drive.google.com/file/d/1eWEt54fiwsIExprM_lu6bxDxB_rF-3Mr/view?usp=sharing

[@DiyBoomboxLab]

drive.google.com/file/d/1h3UJM72VyCjXAXpODSZpXAFQKKYEY6EB/view?usp=sharing

[@LetrelleVisions]

@@DiyBoomboxLab thank you ive been trying to learn about this stuff

[@Golliyo]

nice proyect! but i recommend u to change the amplifier board, i also tested that model "zk-502L" and it dont have very good audio quality, white noise. i prefer xy-c50L or tpa3116d2

[@DiyBoomboxLab]

I will definitely make a video with your recommendations.

[@aliadostech]

Very beautiful design. Just one problem: The midrange speakers are in the same chamber as the subwoofers, you can see that they are dimming much more and therefore generating distortion at high volume. Wouldn't it be interesting to isolate them?

[@DiyBoomboxLab]

I don't use midrange speakers. This is a two-way system with passive radiators. Large speakers are passive radiators to increase volume at low frequencies. The left and right channels are separated by an MDF partition. Thanks for your feedback.

[@TheOriginalBlanked]

Can you post a detailed parts list please?!

[@DiyBoomboxLab]

I'll definitely publish it

[@DiyBoomboxLab]

I have posted a parts list.

[@polluxcastor1143]

Nice attention to details...

[@DiyBoomboxLab]

Thank you for your feedback

[@LetrelleVisions]

Are the measurements in millimeters? And also what size mdf did you use?

[@DiyBoomboxLab]

I will definitely post the drawings and let you know

[@LetrelleVisions]

​@DiyBoomboxLab you don't have to send them now.

[@jimmyjohnjimmy]

its been a month did he send them?

[@carlosrozo3320]

nice project

[@HoangNgocTan]

Why do you use paper instead of MDF?

[@DiyBoomboxLab]

I don't use paper. This is MDF 2.5mm.

[@HoangNgocTan]

@@DiyBoomboxLab oh sorry, I was through they're carton paper

[@carlospaz1251]

Belo trabalho 🤝🏾🇧🇷

[@Samuel_Ayala_py]

estoy seguro de que se hará viral este proyecto genial, saludos hermano mío😄

[@DiyBoomboxLab]

Thanks for your feedback

[@pentegolas7389]

Good work

[@silverbell2937]

what board have you used for led contral with app?

[@DiyBoomboxLab]

music controller SP107. Please wait I will post the parts sheet

[@silverbell2937]

@@DiyBoomboxLab but I didn't see any sp107 in the video

[@DiyBoomboxLab]

timestamp 12:58 , in the center. My mistake, I made a bad video

[@silverbell2937]

@@DiyBoomboxLab I see Thanks a lot, and Keet it up!

[@DiyBoomboxLab]

I have posted a parts list

[@evgeniykhvostik2570]

It looks easy but it isn't so simple in reality I think. Is it?

[@marcelobeck3877]

QUem controla a fita de led?

[@DiyBoomboxLab]

RGB music controller SP107

[@DiyBoomboxLab]

I have posted a parts list

[@hectormendoza4158]

Buen trabajo

[@oiselem55]

yo quiero uno 🥰

[@inhinh9549]

You sale me speaker?😂

[@AlmeroDuPisani-tz4jk]

😂

[@alaingiroux3544]

Le module d'amplification audio est ridicule et le rendu du son est lamentable !!!

[@DiyBoomboxLab]

You're right. I will redo it.

[@lalengkima7196]

❤👍

[@edfgarcardenas1218]

Xxxxxxx