DIY Chicken Feeder with 3D Printable Parts

Рет қаралды 1,776

3 ай бұрын

We join host Hoocho in Building a Chicken Feeder with 3D Printable Parts
Patreon: / hoocho
Welcome to "All the Gear. No Idea"
Where inexperience meets enthusiasm.
On this channel we explore hobbies and pastimes for the first time, looking to expand our skills and experience by seeking out new and exciting pursuits.
Conquering our inexperience with pure enthusiasm and perhaps even discovering our ikigai along the way.

Пікірлер: 27

@TG.34295 3 ай бұрын

No chickens were traumatized in the making of this video.🤣

@addammadd 2 ай бұрын

Cool idea Hoocho, take this as good faith critique: notice they are knocking food out onto the ground. Expect that behavior to develop into problems. The whole purpose of that sheath through which they stick their heads isn’t just weather protection. You need to include a deeper channel to the inside which forces them to have to go inside entirely to eat with a negative slope and a lip to stop them from pulling the feed out.

@indistinctTalk 27 күн бұрын

General comment, do a test fit of your M5 nut (or measure and check the model) before printing several off; the impressions are oversized for the nuts I have so it's hard to get them tight. The side effect of this for me is that water is able to seep into the feeder during heavy rain. If you can put the feeder somewhere it's not going to get rained on, obviously this isn't a problem.

@romanazu5895 3 ай бұрын

Where's the time-lapse with the funky music

@paulstingray 3 ай бұрын

Now, if you could 3-D print me some chickens that would be awesome!!

@AllTheGear-NoIdea 3 ай бұрын

If you think about it, chickens 3D print themselves…

@varanasihydroponics4641 3 ай бұрын

Super idea

@davidmoore7303 3 ай бұрын

Clever 😊

@CriticoolHit 3 ай бұрын

What temperature are you printing your PETG at?

@bobsieschannel 3 ай бұрын

I bet each chook will have its favourite feeder lolol

@Helen-readysteadyhome 3 ай бұрын

100% they will want to use the same one 😂

@indistinctTalk 3 ай бұрын

Does this help at all with mice? I'm guessing it makes it a bit harder for them to access and they can't get at as much feed?

@AllTheGear-NoIdea 3 ай бұрын

Yeah absolutely 👍🏻

@nonoddingdog4682 3 ай бұрын

Mate, awesome design and functionality. Do you offer to print and sell?

@AllTheGear-NoIdea 3 ай бұрын

Not at this point sorry mate

@djredhareaus38 3 ай бұрын

Hey where do you get your filament

@AllTheGear-NoIdea 3 ай бұрын

EBay, use the code MAR15 If you have eBay plus. www.ebay.com.au/itm/404295024792?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=wiqnnyjirsy&sssrc=4429486&ssuid=S9gW36B5QES&var=&widget_ver=artemis&media=COPY

@Terabell 3 ай бұрын

where do you get your filament for $12 per kg

@AllTheGear-NoIdea 3 ай бұрын

@wayne8113 3 ай бұрын

🐤🐔

@bheemasena2383 3 ай бұрын

What filament are you using? Your prints look so glossy.

@AllTheGear-NoIdea 3 ай бұрын

PETG😊

@bheemasena2383 3 ай бұрын

@AllTheGear-NoIdea awesome thanks.

@bheemasena2383 3 ай бұрын

@AllTheGear-NoIdea any particular place? The pla I get is $30 per kg but that $12 per kg sounds much better.

@nunyabusiness7001 3 ай бұрын

why dont you just get "Rain Harvesting 90mm Extra High Flanged Tank Overflow" easier, only 6 50 from bunnings if ya shop online ya can find em for 4 there is also "Rain Harvesthing 90mm Flanged Tank Overflow" 4.50 and a 90mm 90 degree pvc elbow 2.30 (heapssss cheaper online 2-3 bucks for the opverflow and a dollar to 2 for the 90 degree) Rubbish bins are on special at mitre 10 right now 19 bucks for a large green bin. voila! Ya print is cool n shit hahah but why wouldnt ya first jury rig one ya fancy c unt hahahaha