“Quickest and easiest” procedes to use professional carpentry equipment 😂😂😂
@neptuneaudiospace8 ай бұрын
Working on releasing the video that involves using simple tools
@justingriffin368 ай бұрын
@neptuneaudiospace Curious, I don't have access to most of these tools (although I have a friend with a drill and a staple gun) but can't you find/use a place like home depot to cut the wood?
@neptuneaudiospace8 ай бұрын
@justingriffin36 Yes, some of these stores have these power tools, and they do give access to customers for use. So you can definitely do that.
@marcosilvanavarrete1737 ай бұрын
You can do it with a circular saw and a square. And A LOT of patience and planning.
@joserios702410 ай бұрын
Can you teach how to determine bass trap dimensions and materials based on the frequency range you want to cut off the room?
@neptuneaudiospace10 ай бұрын
Thanks for your comment. We will keep this in our notes. Hopefully, soon we can make an in-depth video on this topic.
@baze7037 ай бұрын
kzbin.info/www/bejne/iGfYdKGwebaCZ6c
@r2d2romo16 ай бұрын
@@neptuneaudiospacesería genial verlo.
@micinput10 ай бұрын
Great tutorial. Any specifications on what kinds of materials make good absorptive material?
@neptuneaudiospace10 ай бұрын
Thanks for your comment! There are various types and brands of absorption materials out there. They all perform well and only with slight differences here and there in their performances. If you need a great performance at an affordable price, Rockwool Insulation is the best option. Recycled Cotton and Sheepwool Insulation are awesome at performance but they are not the most affordable, and they are not easily found on the market, unlike Rockwool which is widely available anywhere. You can find Rockwool at your local Lowes or Home Depot store. This is why Rockwool might be considered the best for both price and quality performance, though in terms of safety, Rockwool may not be the safest material ever. But much safer than Fiberglass at least.
@NevadaSYSTEMmusic11 ай бұрын
Is there any practical way to do this without a table saw?
@neptuneaudiospace11 ай бұрын
There are several other ways you could make similar-looking bass traps without using a table saw. We will eventually put some videos together showing how to do this using some really simple tools.
@LilArt2k6 Жыл бұрын
Really good tutorial!!!
@neptuneaudiospace Жыл бұрын
Thanks! Glad it was helpful
@bluerambo34339 ай бұрын
I’ll get on it right away, just before I put together an entire wood shop together. Is there a tutorial for that too? 😂
@neptuneaudiospace8 ай бұрын
Working on releasing the video on that
@domasad3229 Жыл бұрын
Hey dude, great videos all along! Do you plan on making one about diffusers by chance?
@neptuneaudiospace Жыл бұрын
Thanks for your comment. Will make diffuser contents eventually. Will make sure to do this for both Skyline and Quadratic.
@danlong61625 ай бұрын
Great video! Awesome production! Very well done!
@spudpud-T678 ай бұрын
A lot of trigonometry when you can just use take the corner of the room is 90 degrees. Super strong box when it is just holding rock wool. Making a thinner box or just a wrapped rockwool pillow would be just as good.
@vikassm2 ай бұрын
True that! That box is almost good enough to be turned into a satellite speaker on its own. Hmmm...... Can also stuff various lengths of bags with acoustic material and hang it from a protruding hook on the wall, or even from the roof, "Boxing" bag style 😂 This way, installation becomes super easy (Or difficult depending on your room construction)
@robinp91 Жыл бұрын
Great video! What material do you use for absorption?
@neptuneaudiospace Жыл бұрын
It's Rockwool. Other materials are such as Fiberglass, Recycled Cotton, Knauf ECOSE, and Sheepwool. etc.
@mirothedjmusic11 ай бұрын
Amazon sales wedge pillows for queen-size bed pre made bass traps basically, also keeps my pillows from falling
@FubukiCards11 ай бұрын
Your videos are incredibly well made. Thank you! I would however like to say that the panels and this bass trap that you showcase are not really deep enough to do any real absorption in the low frequencies. The thicker, the better!
@neptuneaudiospace11 ай бұрын
Thanks for your comment! We only used this as an example to show how these are built. Obviously, we'd expect anyone looking to DIY to build according to their space requirements. Every type of room has different needs, which in most cases, you'll need basstraps deeper than the sample used in this video. Maybe this can actually be another topic for another day to talk about how to treat different types of rooms.
@guilhermerosarodrigues774811 ай бұрын
How do you attach it on the wall?
@emnesia639111 ай бұрын
Duct tape obviously
@spudpud-T678 ай бұрын
9 inch nails
@davidwashington42825 ай бұрын
that box is probably a little bit overkill. Would be good to cut the back angle also. Not all rooms are perfectly 90*
@Nashville_Cat Жыл бұрын
You deserve many subscribers. Great video!
@neptuneaudiospace Жыл бұрын
Wow, thanks for the motivation!
@rob46018 ай бұрын
Why do you close the back? Do you not let the back be open to let sound go behind the panel into an open space and then it tries to come back? Like the air gap? I'm asking. Not. Arguing or disagreeing.
@neptuneaudiospace8 ай бұрын
We did close the back for safety reasons; to keep the insulation from falling out too much. We did mention in the video that it is optional. You may leave the back open if you prefer.
@thomprd3 ай бұрын
That's the most overbuilt insulation holder I've ever seen. Glue and finishing nails to let the glue dry would have been just fine.. you're not building a subwoofer enclosure.
@drewrice941Ай бұрын
Great tutorial for a professional carpenter I suppose. By far, the most complicated and difficult process video for a schmuck like me that I've seen. Good video, great skill and craftsmanship and desire to be helpful - but absolutely wrong title. Try "DIY Bass traps for the skilled and well resourced craftsman with lots of time on their hands". But dman they look great! You should sell them.
@meedily2 ай бұрын
Dude. There's no safety precautions handling this stuff???
@andsoitis201016 күн бұрын
Dude. How about using common sense ???
@turtlefeet77228 ай бұрын
Nice tutorial, but this tutorial works only if you have all the tools. A workshop like this is more expensive than buying a couple of bass traps.
@jpsandberg7 ай бұрын
Making a fancy jig and clamping the triangular end pieces is a waste of time if you are gluing and screwing. The screws will provide MORE than enough clamping force needed as glue dries That said, while nice, this design is quite a bit overkill as you don't really need back walls for a corner basstrap - the actual walls of the room will suffice.All this does is take away from the amount of actual acoustic material you can use in the trap given the front face dimension. Quite a bit actually.
@grumpyguss17 күн бұрын
Bass traps should never be enclosed like that you want the sound traveling through the trap entirely, hitting the wall behind and traveling back through.
@pc33407 ай бұрын
question, are bass traps not supposed to have an air gap built in? Would it make sense to halve the size of the insulation wedges being placed in these enclosures?
@neptuneaudiospace5 ай бұрын
Yes, it is great to give room for airflow on both sides and maybe a little air gap behind. We might make a video on this eventually.
@Jefff2374 ай бұрын
M guessing this title was sarcastic
@KASmonkeys11 ай бұрын
lol
@PentaxBlogger4 ай бұрын
CORNERS ??? Bass is everywhere! You want it traveling from speaker to you ears only. Not reflected from any other surface. How much % of a room is "corner". How far from "fold" is still a "corner". 1 cm, 1 dm, 1 meter ??? Bass trap in corner is stupidity. Especially that small "waste of time" stuffed with stone wool. You really need to cover area - in pairs. And still wool will dampen higher frequencies NOT bass. Who really cares if there is some "bass" in the corner, until it does not reach your ears. It is funny seeing people stuffing wool in corners and they think they improved something. They think "bass" is in the corner just because it happens they hear it double reflected if they stand in corner. But they do not listed music standing in the corners, right. They should control reflections and frequency response from the place where they LISTEN ... and than seek the problematic surface. Attention to word "surface", since corner is a "spot", or "line" only. Imagine the wavelength of a sound wave at 85 Hz is 4 meters, when you will cut that MDF next time down to 25 centimeters, and calculate how little to no significance that "bass" trap has to low frequencies. LOL
@nathannorth49253 сағат бұрын
Jesus dude, it was an example of a bass trap, quit being some elitist audio engineer and just relax. You’re probably far to old to be this triggered over a KZbin video.
@baze7037 ай бұрын
so many great craftsman tips, but such a terrible bass trap design. what's that little thing going to do? it might get down to 1500 hz. broadband bass traps are especially terrible for small rooms (your room). look at Helmholtz resonators and find videos from old engineers
@neptuneaudiospace7 ай бұрын
The little thing is nothing but just a sample for the tutorial. It's a sample used to show how it's built. We never and won't recommend that folks should build to the same miniature size. Everyone should feel free to build to their desired dimensions according to their room needs.
@baze7037 ай бұрын
@@neptuneaudiospace great craftsmanship info tho. Super informative. Thanks. I’m sorry for being a grump
@julesberran35194 ай бұрын
Not at all easy.
@skypallman61697 ай бұрын
Yeah you're definitely supposed to use your finishing nails or more appropriately brad nails when you are assembling the two corners together. the whole point of the brad nails for finishing nails in your case is to hold the wood together until the glue dries.... 🫣