DIY Custom Display Case From Scratch

[@lucifernoexiste]

This is one of the best display options and solutions I have seen. Congratulations on the project and thank you for sharing!!!

[@PopCultureLivingRoom]

Thank you for watching! I'm happy you enjoyed it.

[@bigdogpound1253]

Bro, you are a genius man. Sir you are thinking outside the box. I need to watch this video a few times to get everything. Wooooooooo.

[@PopCultureLivingRoom]

Woooooooo! My man! If you decide to build this and you have any questions, just reach out to me and I help you out. Thanks for watching and being awesome!

[@Artemisio987]

i'm a complete novice regarding diy... but your explanation is so clear (AND IN METRICS!!) that it's filling me with enough hubris to think i might pull it off ahahaha

[@PopCultureLivingRoom]

That makes me happy to hear. Thank you so much! If you have any questions or need help, please feel free to reach out to me. I'd be happy to help.

[@bcmexkid07]

Careful, he's a hero! lol Thanks for your tutorials!

[@PopCultureLivingRoom]

Thanks so much for watching and supporting the channel!

[@Blitz0065]

Imagine the possibilities!! Thanks for the information!

[@PopCultureLivingRoom]

Exactly! Thanks for watching!

[@chrisambler772]

Thanks for opening my mind of how to display my '66 batmobile and my '22 batmobile!! I went with 5mm mirror acrylic panels to allow maximum visibility!!

[@PopCultureLivingRoom]

Thanks for supporting the channel! I'm happy I was able to inspire. The mirror acrylic sounds cool. You're going to have to send me pics. I would love to see it. [e-mail]

[@aberodriguez4149]

Very Impressive sir thank you for sharing such a detailed diy project. Just got into printing 3D figures and in doing so I have come to the conclusion I need shelves or cabinets and this instructional video has got me thinking also outside the box. 👍👍👍

[@PopCultureLivingRoom]

That's amazing! I'm so happy I could help. Thank you so much for watching! If you have any questions at any time, please feel free to reach out to me.

[@luismarin3551]

You sir are a gift to the community👍👍 Thank you so much for sharing. Looking forward to the riser build.

[@PopCultureLivingRoom]

Thank you Luis! I'm happy you liked the video. More are definitely on the way.

[@henrysmifth536]

Bro I think you've cornered the display market 👍👍👍

[@PopCultureLivingRoom]

Thank you! I'm glad you like the videos. I have some cool stuff planned so stay tuned.

[@andrewcalica2570]

Finally hung one of my DF120s on the wall with your equipment suggestions. Ain’t fell down yet. Thanks for the help, chumley!

[@PopCultureLivingRoom]

Awesome! Send me a pic of it to [e-mail]. I'd love to check it out on the wall.

[@ohnename1358]

Beat diy I’ve ever seen. Awesome

[@PopCultureLivingRoom]

Thank you so much! I'm happy you like it. If you decide to build this display or any display case on my channel, please feel free to reach out if you have any questions.

[@johnwagner4559]

Just gorgeous! You are very talented. Fun and funny too. Lol

[@PopCultureLivingRoom]

Thanks John! I appreciate that. I'm happy you enjoyed the video.

[@bobdylan5705]

Fantastic job and a service to the community!

[@PopCultureLivingRoom]

Thanks Bob! It means a lot coming from you.

[@alanmusicman3385]

Your reassurance to people in the US about using metric measures resonates very strongly with me. I am from the UK and I grew up using measurements in feet and inches etc - though I always struggled with arithmetic operations and fractional values of such quantities. Then at about age 60 I decided that - as an awful lot of things in the UK are moving toward the metric system - it was time that I really started using it. SOoooooo glad I did. Once you have the basics into your head, designing and making stuff gets so much easier cos you have no more dealing with all those irregular quantities and crazy fractions - makes all that side of things a piece of cake. I would encourage any maker who has been delaying their move to metric to take the plunge - you won't regret it.

[@PopCultureLivingRoom]

Thank you so much!!! I appreciate you telling me your journey with metric. Metric is so easy. It's like anything new. Once you get used to it it becomes second nature. Thank you again!

[@haozhiqian]

This is amazing! I've been searching for a tutorial like this for ages. Thank you so much for putting this together.

[@PopCultureLivingRoom]

Thanks so much for the support and thanks for watching. I'm happy you like the video. If you have any questions when you're making it, feel free to reach out to me. I'd be happy to help.

[@yarty3736]

Amazing job man! You did your own moducase!

[@PopCultureLivingRoom]

Thank you! I appreciate it!

[@ElProfessoro22]

Amazing tutorial! You’ve shown everyone how to basically build their own moducase! Thanks for this vid!

[@PopCultureLivingRoom]

Thank you so much Mario! It means a lot coming from you.

[@protocoldroid7388]

yeah I'm doin it too. Too poor to afford moducase but doing a massive garage rack perspexised (even with Aus rip off prices is still cheaper than moducase)and Amazon lighting. I hate Amazon but not as much as the monopoly Bunnings has on this country (and the rip off prices on similar lighting) Thanks Man. I wish I was as on point as you.@@PopCultureLivingRoom

[@jondeak]

You are a perfectionist. This video is incredible for collectors. Thank you!

[@PopCultureLivingRoom]

Thanks a lot Jon! I really appreciate it!

[@arthurbernard5620]

De la part de la communauté française de collectionneurs, merci beaucoup !! Tanks very much, keep going !!!

[@PopCultureLivingRoom]

Viva la France! Merci beaucoup d'avoir regardé. Hopefully that says Thanks for watching.

[@DonPeppinoo]

This is just amazing!!!! Moducase now has competition with the CostaCase I freaking love it! The only thing is, and yes it will be an investment,,, but i have to buy all those damn tools. Costa, you're a hero without a cape.

[@PopCultureLivingRoom]

Thanks Don! It gives people options. Depending on where you live, the supplies for making this case can be little more than a Moducase or a little less. But you won't have to wait. I'm in the process of making an update video for this case. Thanks for your support Don!

[@pembsposse2621]

As someone from the uk… this is amazing thanks XD

[@PopCultureLivingRoom]

This should be way cheaper for you. The frame was £68 but the shipping was about £40. It was still as cheap as buying them here in the U.S. plus they come to you cut to the size you need. Thanks so much for watching!!!!!!!!

[@pembsposse2621]

@@PopCultureLivingRoom surely shipping will be cheaper for me then, awesome! You’re welcome mate, enjoying the vids

[@Mikefig08]

This is absolute genius!! thank you so much for this video!

[@PopCultureLivingRoom]

Thank you so much for watching! I'm glad you enjoyed it.

[@jarrettgarcia9008]

Awesome Case. I will try to make a larger one myself. Thank you

[@PopCultureLivingRoom]

Thank you! If you have questions while making your display, please reach out to me. I'd be happy to help.

[@sarahscarborough3942]

I liked and subscribed because of the metal tape air guitar. That, and this video is very helpful and informative. But mostly for the air guitar.

[@PopCultureLivingRoom]

Thank you! My 20 years of air guitar practice really paid off. Lol

[@BrotherCousinsToyReviews]

Great tutorial brother. I'm changing my both of my collection rooms because of you. Thanks for the great information.

[@PopCultureLivingRoom]

Thank you so much! I'm happy I was able to inspire you. When you're finished, your collection is going to look dope. Feel free to reach out to me if you have any questions when you're making your displays.

[@daveybutlerbjj]

this is awesome. great editing.

[@PopCultureLivingRoom]

Thank you so much! And thanks for watching.

[@old_gamer_tobi]

great work. I would add a black pvc form sheet bottom panel for wall mounting. that would look cleaner.

[@PopCultureLivingRoom]

Thank you so much for watching! I totally agree with you. I was over a month in filming and editing this video and wanted to get it out so I sacrificed showing that. I'll be mentioning it in my Livestream this weekend. I will be doing a video showing options for underneath. Another option is to add a translucent white piece of acrylic and add lights in it.

[@j-dizzle6264]

Great work dude... I'm inspired. I appreciate your attention to detail in your instructions, materials and tools. And, you're totally right about the metric system.... I don't know why America insists on sticking with the Imperial measurement system.

[@PopCultureLivingRoom]

Thank you so much! I appreciate the love. If you decide to make any of the display cases on the channel and have questions, please feel free to reach out to me. I'd be happy to help.

[@santhoshv8812]

Finally!! Thank you so much for this 🙌🏻 Hopefully if I get all the necessary parts I'll build one.

[@PopCultureLivingRoom]

Thank you! I'm here if you have any questions when you decide to build the case.

[@uncommonflex]

Great video. Love the Vader on the couch 😂

[@PopCultureLivingRoom]

Thank so much Flex! I'm thinking about making merch with the Vader on the couch. I love it!

[@randomrebuilds]

Great job on the display case - lighting level is perfect. The only thing I would have done differently is fish the wire through the wall and have its termination point below - an OCD thing with me and TVs hung on the wall.

[@PopCultureLivingRoom]

Thank you! I appreciate the kind words. I agree with you about the wire. I've updated my wall setup and have another display case under it. It looks great. Thank you for watching!

[@rhongiron6939]

I did subscribed because you are awesome!!! great work and very helpful!! thank you!

[@PopCultureLivingRoom]

Thank you so much! If you decide to build any of the display cases I have on my channel and you have any questions, please feel free to reach out to me. I'd be happy to help or answer any questions you have. Thank you again!

[@yourfavcodplayer33]

i watched your other video first if i woulda known i would have watched this one first i love your idea and gonna change my dimensions maybe change a few things i definitely noticed you got way better at it thank you

[@PopCultureLivingRoom]

Thanks so much for watching! I really love this display case. I'm making a second one to go underneath the first one and I'm making one that's even bigger than those and several smaller ones to hang around in spaces that normally wouldn't be able to hold a display case. One of those little ones I'm calling a Grail case because it's meant to feature one or two six scale figures but you could put a half shelf in there and if you collect 7-in figures, you could have a couple of rows for 7-in figures. The case in the link below is the Grail case and it's going to be my next tutorial. It would have been released sooner but thinking about including a couple of different sizes in the tutorial. I'm working on it feverishly right now. instagram.com/p/Cj26xxNOQUS/?igshid=OGQ2MjdiOTE=

[@glenretamar6639]

Very detailed! Amazing build!!

[@PopCultureLivingRoom]

Thank you so much! I'm happy you liked it.

[@stevesshowcase]

Hey dude. This is great! And how you presented it is perfect (I LOL'ed multiple times). This has given me big ideas so thank you for that!

[@PopCultureLivingRoom]

Thanks Steve! I'm happy the video gave you some ideas. Are the ideas for the display room you're working on?

[@stevesshowcase]

@@PopCultureLivingRoom Yep! Going custom like you. I have retired my Detolfs and Moducase was a consideration. But decided custom!

[@PopCultureLivingRoom]

Can't wait to see the final product.

[@stevesshowcase]

@Pop Culture Living Room Hoping in the next few weeks. Then I'll upload video to my channel. I'm so excited!

[@PopCultureLivingRoom]

Awesome! I can't wait to check it out.

[@Colin-xe1io]

Mate an excellent video. I am an avid collector but poor handyman. Your video was so explanatory I now have the confidence to give the build a go. (Minus the electrics at the moment). Thank you for sharing some of your knowledge

[@PopCultureLivingRoom]

That's awesome! Thank you so much! I'm happy you like the video. If you have any questions while making your display, please feel free to reach out to me. I'd be happy to help!

[@JojosupremeIQ195]

Man you did it again!!!! I remember you told me you were working on a floating shelf and you have delivered! You are a godsend. Not now but I will do this one day. This came out amazing! Way better then I thought when you first mention it. It does look awesome all blacked out. Either way you can't go wrong. Once again you're the man. God bless you, & I say that on the behalf of the collecting community. Edit: T-nuts 😂

[@PopCultureLivingRoom]

Thank you so much! You're too kind ShroomGod. I'm happy you enjoyed it.

[@boxerxx951]

I need one like this for the 1/6 tumbler

[@PopCultureLivingRoom]

That would look amazing.

[@PhAtALTheAlphA]

Love the energy bro! And those displays look Proffessional! Moducase Who¿

[@PopCultureLivingRoom]

Thank you so much!

[@Cinderkin]

I hate everything about this video. Now I have to make a hundred of these. You bastard! Thank you

[@PopCultureLivingRoom]

Lol. Thank you so much! If you have any questions, feel free to reach out to me. I'd be happy to help you make a kick ass display.

[@DanielSullivan79]

All things considered, great job.

[@PopCultureLivingRoom]

Thank you so much! And thanks for watching.

[@JC-4791]

An excellent how to. Roughly how much did it cost to complete?

[@PopCultureLivingRoom]

Thank you! When I built this it was a little under $200 but that number may be different now. The cost will depend on where you live in the world because of the aluminum. Thank you for watching!!!

[@BXDRAGONX1]

Great video. Thanks for the tips.

[@PopCultureLivingRoom]

Thank you!

[@brandonblack7506]

Holy shit this is EXACTLY what i was looking for!!

[@PopCultureLivingRoom]

I'm glad you like the video! Thanks for watching! If you decide to make this display case and you have any questions, please feel free to reach out to me.

[@ssmartin6671]

Finally man!!! Been waiting.

[@PopCultureLivingRoom]

Hope you enjoy it!

[@onesixthforjesus]

Thanks brother! You put the A in awesome!!🙂👍🏾💯

[@PopCultureLivingRoom]

Thanks so much! I appreciate the love. If you end up building any of the cases on my channel and you end up with some questions, please feel free to reach out to me. I'd be happy to help.

[@onesixthforjesus]

@@PopCultureLivingRoom Thanks I’m sure I’ll need it ! I also subscribed!👍🏾

[@PopCultureLivingRoom]

@@onesixthforjesus Awesome! Thank you for supporting the channel.

[@onesixthforjesus]

@@PopCultureLivingRoom you got it brother! Any KZbin video tips you can provide like the best apps for video making🤔

[@PopCultureLivingRoom]

I recommend Think Media and VidIQ KZbin channels for learning. I use Adobe creative suite for editing. Thumbnails and titles are very important to get down. Practice practice practice.

[@Doomthulsa]

This is awesome! I would love to see a display built with this method that can hold 1/3 Prime 1 statues!

[@PopCultureLivingRoom]

Thanks! I made a much bigger case that I have on a wall. It can hold a lot more weight. You can check it out here: instagram.com/p/CpZ9cICOG6s/ I'm working on finishing it. So stay tuned.

[@Doomthulsa]

@@PopCultureLivingRoom Can't wait to see the final version! Epic job!

[@albertpercu]

29:14 it’s easier if you screw first and then slide all the T-nuts at once. In any case, very good tutorial👍.

[@PopCultureLivingRoom]

Great tip! Thank you! And thank you for watching!

[@sytze6138]

The GOAT once again blesses the community with another phenomenal custom display tutorial. These are amazing with all the reverse engineering put in. Are you going to try anything to make them stackable?

[@PopCultureLivingRoom]

Thank you so much! I appreciate the love. These are already stackable. I plan on putting a second one underneath the one I have. You need to use a quad t-nut. And you slide them in between the two cases on the back rail. This will be demonstrated in my next video which will be my Grail case. instagram.com/p/Cj26xxNOQUS/?igshid=OGQ2MjdiOTE= That tutorial will be in the first half of January.

[@impossiblepie]

Awesome work, looks fantastic!!

[@PopCultureLivingRoom]

Thank you! I'm glad you like it. Thanks for watching!

[@sixthscaleshero]

This is next level! Amazing work Costa! 👏🏻👏🏻👏🏻

[@PopCultureLivingRoom]

Thank you so much!!!!!!

[@TheNotoriousNemo]

I have this large statue about 3'by 2' high, ima try to make a coffee table out of. I was thinking of using extrusion but never saw anyone actually make a box out of it. This will definitely help

[@PopCultureLivingRoom]

I'm happy this helps you. I'm actually thinking about making a coffee table case and tutorial. Thanks again for watching!

[@TheNotoriousNemo]

@@PopCultureLivingRoom that would be a good one. I haven't seen anyone do one. I'm not sure what I'm going to put on top. A large glass I think for durability

[@PopCultureLivingRoom]

I'm thinking about glass too. Less chance of scratching. Ive been looking up places that could cut to size, polish the edges and add the holes I'd need attach to the frame. I'll let you know what I find.

[@Mu9enx]

Yooo!! This is so dope, thank you for the tutorial!

[@PopCultureLivingRoom]

Thank you so much!!!

[@andreromero240]

This is soooo helpful man! Thanks and keep it coming with these great videos! :)

[@PopCultureLivingRoom]

I'm happy you enjoyed it! Thanks for watching and thanks for the support!

[@Licherous]

Great tutorial, currently considering moduspace cases, but the production and freight time is so long that something like this seems to be a reasonable alternative to waiting 4+ months

[@PopCultureLivingRoom]

Thanks so much for watching! I'm happy you liked the video. I'm working on an update video with some upgrades I did. Hoping to have that out soon so keep an eye out.

[@peps4747]

Great job 🔥🔥🔥🔥

[@PopCultureLivingRoom]

Thank you!!!!!

[@TickBallsOut]

THis is fantastic. I wont use it for Prime 1 statues or anything lol, BUT for 1/6 scale mostly plastic figures, pefect!

[@PopCultureLivingRoom]

Thank you!

[@mrcarlo1966]

You should start selling these!Thanks for the video.

[@PopCultureLivingRoom]

I wish I could. I wouldn't be able to be competitive with other companies because I cannot get the materials at wholesale at the moment. Maybe one day. Thanks for watching!

[@scotteh85]

As this started I was thinking "Exactly like my Moducases and now I don't have to donate a kidney to get more imported to the UK". You're an absolute hero as I have been looking for somewhere like Ooznest in the UK to do this for ages! Only thing I would change is for the acrylic sheets you can do what Moducase do and use the plastic inserts that slot in the 5mm channels to hold them in place.

[@PopCultureLivingRoom]

Thank you so much Scott! I'm happy I was able to help out. People from the UK definitely have an advantage on cost for the aluminum. I look everyday for cheaper alternatives for the value and Ooznest is hands down the best for no matter where you live. I did try to use the slot covers in the channels for the acrylic but they were still too wide. I don't own any Moducases so I am not sure what theirs looks like. I have been looking for something that could go in the channel and hold the acrylic. What do the moducase ones look like? Are they thinner than the channel? I'd love to figure that out. If you know or have pics, could you send them to my instagram. I'm always trying to improve the cases so any help would greatly be appreciated. Thanks for your support.

[@scotteh85]

@@PopCultureLivingRoom Let me grab you some pics, I'll fire them over shortly. I have no idea what they're actually called so I can't find them online... yet. I priced up a build from the UK and it works out to about £300 for the size of a Moducase DF120 (minus tools) as I own 3 DF120 from Moducase already so know the cost to import them. If I was to buy a single DF120 unit from them and the shipping was minimal and there was no import tax I wouldn't think the effort for this was worth the difference. The problem is with shipping and import tax it added on about £350 to the overall cost. That makes this build worthwhile in my eyes as I can do a direct comparison between this custom build and Moducase for the same dimensions.

[@scotteh85]

@@PopCultureLivingRoom Dropped you the needed over on IG after doing a bunch of research.

[@dioramaworldcustoms]

Excellent job! Instead of making more hanging cases, I think you should make more of the big display cases with 4 shelves. Having at least 4-6 would be nice.

[@PopCultureLivingRoom]

Thank you so much. I appreciate it. And thanks for watching! I would definitely make more garage shelves but at the moment I don't have room.

[@dioramaworldcustoms]

@@PopCultureLivingRoom let’s do a live walkthrough of your home. We’ll figure this out together. Maybe it’s time to scrap the dinning room. They’re so overrated! This new generation don’t even use them! Lol!

[@Frailty8]

Came out great 👍🏻

[@PopCultureLivingRoom]

Thank you! I'm happy you enjoyed it!

[@snowontheweb]

ROFL 🤣 Vader on the couch! Hahahaha

[@PopCultureLivingRoom]

That's one of my favorite poses. Thanks for watching!

[@kachalujan1126]

You are a legend!

[@PopCultureLivingRoom]

Thanks so much! I have an update for this video coming soon!

[@kachalujan1126]

@@PopCultureLivingRoom Nice! I am planning to make my own display case with the Besta IKEA case. - Spotlights from Aliexpress - Magnetic strip and metal strip with black tape for plexiglass for dustfree and airtight. Much cheaper and in my opinion nicer 🤘🏻🙂

[@kachalujan1126]

@@PopCultureLivingRoom Hey Just a quick question, why didn't you use A+B magnetic tape? Isnt that better?

[@arickle]

Do you think it would be possible to mount the garage shelves on the wall? The tall ones are two distinct parts, and there's hangers on the edges already (granted those holes are meant for dropping things down into them). I'm looking for something elevated more like the height of cabinets to hang above and around a desk area 🤔

[@PopCultureLivingRoom]

Hello! I would not recommend mounting a garage shelf to the wall. They are boltless and may come apart. How big are you looking to have the cabinets? Thanks for watching! Let me know if I can help.

[@Tobor66]

Costa wow!

[@PopCultureLivingRoom]

Thanks Tobor!

[@GaryNeumann]

Amazing video! I'm far along getting the materials. I might do something crazy and place 5 stacked on top of each other. I do have hardwood floors. Do you have any suggestions for endgacaps towards the floow for the structure not to scratch the floor?

[@PopCultureLivingRoom]

Thank you so much! If you do stack them you will need a Quad T-Nut to lock the cases together. It will slide in the back between the 2 joints and screw in. Here is a link to Quad T-Nuts: openbuildspartstore.com/quad-tee-nut-makerlink-10-pack/?ref=BvQnmjqj7p98MT For adding feet, You can go one of 2 ways. 1. Using rubber feet with T-nuts and screw. This one does not require anything but buying the rubber feet. They come with everything you need. Here is the link. amzn.to/3TrnMYa 2. This way requires to get the you to have the bottom end of the posts threaded. These can screw in or out to level the case. Get the M5 x 8mm or M5 x 10mm Here is the link: amzn.to/48r0RQV Thank you again! I'm here if you need help!

[@GaryNeumann]

@@PopCultureLivingRoom Thanks again! It came out great. I will consider some mods / risers and other options in the future! Have you considered on using spotlights on some of them?

[@PopCultureLivingRoom]

@GaryNeumann that's awesome! You'll have to send photos of it to my email. I'd love to see it. I have thought about using spotlights and I will probably look into that within the next couple of weeks. I'm working on an update video and I'm thinking of including spotlights as an option.

[@scorpio6587]

8:57 Where can I get an iron towel?

[@PopCultureLivingRoom]

Amazon.

[@Smallvillefreak]

I am going to give this a try, but with a slight change. I’m going to make a side panel magnetic and leave the front stationary.

[@PopCultureLivingRoom]

That is an interesting idea. You're going to have to let me know how it turns out. Thanks for watching and if you have any questions when building your display, please feel free to reach out.

[@Smallvillefreak]

@@PopCultureLivingRoom can these be built as a multi-tier cabinet?

[@PopCultureLivingRoom]

@@Smallvillefreak Yes they can. I'm working on a video update for this case that will include how to stack.

[@juanmadecadiz74]

Está genial

[@PopCultureLivingRoom]

Muchas gracias Juan!

[@koh2971]

Are you able to connect these to another unit if you were to build another one?

[@PopCultureLivingRoom]

Yep. You can connect them stacked on each other or side by side. I am working on an update video showing how you can do both. I currently have a second display connected under this one. Thanks so much for watching!

[@rakamanchris]

Can you build a full wall unit like Moducase with this?!? If so I’m doing it!

[@PopCultureLivingRoom]

Thanks for watching! Yes. You can make any size case and stack them to make a full wall unit.

[@rakamanchris]

@@PopCultureLivingRoom this is the up up down down left right left right we all needed! You are a godsend sir. You have my subscription and my attention 😂

[@PopCultureLivingRoom]

Thanks for your support! If you do decide to build the cases, feel free to reach out to me if you have any questions.

[@Mogonly]

Where did you buy that red couch, I want to get one too.

[@PopCultureLivingRoom]

Hi! I got it from Etsy. They do not have the red at the moment but here is the link to the Etsy Shop: www.etsy.com/shop/DollRoomDecors?ref=yr_purchases Thanks for watching!

[@blackfox3dstudio]

Great video. Congrats. Now a question, before i by the materials, do you think that this can hold resin statues (10-15kg) The ideia is for wall mount. Thank you and keep this work.

[@PopCultureLivingRoom]

Thank you for watching! Are you making the display the same dimensions as the one in the video? If so, it can hold 15kg.

[@yddetape]

This video is mint. Working on one of these now. Will be about 38"w - 20"d - 17"h to display the Hot Toys DeLorean, which weighs about 10 lbs. Do you think a case of this size/weight can be supported by the cleat? Thanks!

[@PopCultureLivingRoom]

Thanks so much for watching! I definitely think the French cleat could support the DeLorean. I recently made one that is 53 in wide x 23 in deep display and it's been on my wall for months without any issues. The key is to make sure that all of your screws are tight and there shouldn't be a problem. Also make sure that you put the other side of the French cleat into a stud or 2. Have you bought all the materials yet for the build? If not, you can go with a 3 mm thick PVC sheet instead of the 6 mm thick. It's cheaper and it does the same job. Here is the display case I told you about from my Instagram: instagram.com/p/CpZ9cICOG6s/?igshid=MTc4MmM1YmI2Ng== Thanks again for watching and if you have any other questions while building your display case, feel free to reach out to me.

[@DV91]

Finally Thank you! Just trying to wrap my head around all the information 🤯

[@PopCultureLivingRoom]

I hope you enjoy it Daniel! Thanks for your support.

[@LordHog]

Great build, thought step 0 is converting everything to freedom units

[@PopCultureLivingRoom]

Thanks so much for watching!

[@henrymitchell9847]

Another great build. Man you are awesome. Thanks for the idea. Only one question, when you hung it on the wall what was the solution for the bottom of the case? I could see the bare wood on the bottom.

[@PopCultureLivingRoom]

Thank you so much for watching! And thank you for your support. Initially I didn't mention anything for the bottom because I was making another display case to put underneath it and I didn't think about it. With the size of this video, I was bound miss something sadly. When I did start thinking about what to add to the bottom, I started having a bunch of ideas and then I thought I should make an update video with all the ideas which I plan on doing. One thing you can do for the bottom so that the wood isn't showing is you can cut another piece of PVC foam sheet to the same measurements and notches of the top panel and then slide it into the channel at the bottom. This will give you a nice black panel to look at instead of the wood. There should be plenty PVC sheet leftover to make this. Another thing I was thinking was to wire LED lights under there and slide a translucent white acrylic panel in the channel at the bottom so that you can have light shooting down. Or you can make kind of a light box and add LED lights and have an acrylic panel with the logo of your figures in the bottom channel. Hope this makes sense.

[@ggriffaw]

Thanks for the video. Is the front panel using magnetic and metal tape secure without being difficult to remove?

[@PopCultureLivingRoom]

Thanks for watching! It is very secure. The magnetic tape I use is the strongest I've found and works great.

[@ReynaldoLeonLor]

Nice work and excellent video production! I see you didn't list in the materials and or discuss where to get acrylic sheets. This is the one product/material I've been struggling to source. Would you please share your source, tips, suggestions and or recommendations on where and how to get acrylic sheets for displays? Thank you in advance and keep up the awesome tutorials!

[@PopCultureLivingRoom]

Thank you for watching Reynaldo! I appreciate the kind words. I first checked all the usual sites and places. I went on Amazon, Home Depot, and Lowes. Then I googled "Acrylic Sheets near me" and I was able to find a local place that sells plastics which included the acrylic sheets and PVC sheets. I would try to go local if you can as they are cheaper. Where are you located? In the US? Outside the US?

[@ReynaldoLeonLor]

@@PopCultureLivingRoom In the US. Hadn't thought about hardware stores. Tried looking around for plastic manufacturers, but none in my area. Guessing home depot is considerably more expensive huh? What are decent prices in the US?

[@PopCultureLivingRoom]

@@ReynaldoLeonLor Home Depot is pricey. I'm going to do some research and Ill get back to you. I found a couple of possible places to buy but want to do a little more research. Which state are you in?

[@ReynaldoLeonLor]

@@PopCultureLivingRoom thank you! I'm in Virginia near DC.

[@PurePazaakCustoms]

Just (potentially) saved me from dropping a couple grand on custom Hangar bay displays for my BMF, Razorcrest, and Sail Barge! Easy sub!

[@PopCultureLivingRoom]

Thank you! If you have any questions, please feel free to reach out to me. I'd love to help.

[@djn1822]

Wow!

[@PopCultureLivingRoom]

Thank you!!!!!!!!!!!!!

[@JessePigeon]

great looking display case but i have a few things you might need to think about. first, its great you looked for studs but those plastic anchors won't go into the stud. they're only designed for drywall. you'd be better off getting some type of lag screw or something ment to hold weight that will penetrate into the stud for best strength. second would be to consider using a second french cleat on the bottom. you might have used a ton of anchors in the wall and to hold the other half onto the extrusion, but the entire weight of everything hanging there is being put on just two small screws that hold that piece of extrusion to the rest of the frame. hate to see this fall off and hurt someone. just things to consider.

[@PopCultureLivingRoom]

Hi Jesse. Thank you so much for watching! I totally agree with you about using plastic anchors with studs. It just won't work. I don't believe I told people to use the anchors on the studs in the video. I'll have to look in to the lag screws. I'm always looking for better ways to do things. Thanks for the tip. As for now, the case has been on the wall for a year with no strain to the cleat on the case or the wall. In fact I added a second case under the original. You can check it out on my instagram @popculturelivingroom. Thank you again for watching!

[@abrahamvazquez4782]

How much was the total cost of the materials?

[@PopCultureLivingRoom]

The cost per material used without the lights is $238.60USD and with lights it's $277.78USD. The cost includes shipping. A big factor for the cost is, $50 of that is shipping of the aluminum extrusions from the UK. The Aluminum only cost $60 and it was cut to the size I wanted. If I got the Aluminum extrusions from the couple places I looked at in the US, the price difference of the totals was only a few dollars and the US distributors did not cut them for you. If you live in the UK or EU, this will be a less expensive case due to the shipping. And if you live in California, chances are it will be a bit more expensive. If you want to compare it to something, the closest I could find that was comparable to my case, would be the Sixth98 by Moducase. Which is $320 + Shipping. I am going to add the cost to the video description.

[@Mountain_of_toast]

Just stumbled across your video on my way to hunt for an affordable coffee table display case. If you wanted to make a coffee table display case how would you go about making the top clear and sturdy? I’m trying to display some things (need a 48x24x18 coffee table display case size) but all the coffee table display cases online are super expensive. I’m trying to figure out the best method to keep a clean look like you have but with strength to the structure. Any help is appreciated!

[@PopCultureLivingRoom]

I have been thinking about doing a coffee table tutorial for awhile. I do have some ideas. Email me at [e-mail] We can discuss and maybe I can come up with a drawing. Thanks for watching!

[@cuafpr]

This is legit amazing... now I'm debating this over modified garage shelving... Have you thought about adjustable shelves and how that would work?

[@PopCultureLivingRoom]

Thank you so much! If you want to be able to have your garage shelf adjustable, for the back panels you would keep it as one big piece and attach it from behind. Same for the front acrylic, keep it as one big piece. Hope that makes sense. Whichever case you decide to make, if you have questions or run into an issue, please don't hesitate to reach out to me. I'd be happy to help.

[@kalibkadafi7747]

The end of the aluminum was threaded by the factory? What size bolt did you use and did they provide the bolts?

[@PopCultureLivingRoom]

Thanks for watching. Yes, I have the factory thread aluminum for me. The bolts are M5 x 10mm bolts and you have to buy separately. I have all the info about what I used in the description.

[@russelljang1874]

Great tutorial! Thank you, sir. Do you think the 2020s are durable enough to hold a 30 lb piece?

[@PopCultureLivingRoom]

Thank you! It can hold 30lbs. I will say that if you make the case bigger, you may need to add additional aluminum to the middle of the bottom, middle and top of the display. If you want greater strength then you would use 2040 aluminum for all parts of the Case. Hopefully at some point I will have a video up showing what to do when making a bigger case. Thanks for watching!!!!!!!

[@russelljang1874]

Thank you! This is very helpful.

[@mikuronightray5902]

hey. what paint color is your wall? pls tell meee. looks awesome!!

[@PopCultureLivingRoom]

Thanks so much! The paint is Benjamin Moore Ashland Slate #1608.

[@mikuronightray5902]

​@@PopCultureLivingRoomcool!!! very nice

[@PopCultureLivingRoom]

Thank you!

[@carloses3527]

You are a star! 👏👏

[@PopCultureLivingRoom]

Thank you!!!!!!!!!!!!!!!!

[@ChristopherOcampo-v2m]

I found this video and it's so informative! I have a question tho! I want to make 2 layers of these. What metal frame should I use?

[@PopCultureLivingRoom]

Thank you for watching! Do you want to make 2 separate cases stacked or one big case with 2 levels? I personally made 2 separate cases and stacked them together. You can check them out below: instagram.com/p/Co0nyFMu-j-/ You can connect the 2 cases using Quad Tee Nuts. Quad Tee Nuts: bulkman3d.com/product/makerlink-quad-tee-nut/ If you want one big case with 2 layers, I would still use the aluminum extrusions. If you have any other questions, please don't hesitate to reach out to me. I'd be happy to help.

[@KillJoy5950]

What was the end cost for this case

[@PopCultureLivingRoom]

The cost per material used without the lights is $238.60USD and with lights it's $277.78USD. The cost includes shipping. A big factor for the cost is, $50 of that is shipping of the aluminum extrusions from the UK. The Aluminum only cost $60 and it was cut to the size I wanted. If I got the Aluminum extrusions from the couple places I looked at in the US, the price difference of the totals was only a few dollars and the US distributors did not cut them for you. If you live in the UK or EU, this will be a less expensive case due to the shipping. And if you live in California, chances are it will be a bit more expensive. If you want to compare it to something, the closest I could find that was comparable to my case, would be the Sixth98 by Moducase. Which is $320 + Shipping. I am going to add the cost to the video description.

[@DominicZxen]

*Whines*.... But DAAAAAAAdddddddd I don't wanna learn the metric system..... *sniff sniff sniff*....... LOL 😜😂😝 Going metric makes things a lot easier. I'm also understanding why it took you so long to get this out, you put a lot of effort and info into this video. This will definitely be my next project once I finish my garage shelf displays. Again great job my friend keep these great ideas coming!

[@PopCultureLivingRoom]

Dominic thank you so much for the support and love.

[@driedblood]

Do you still recommend the Ooznest UK company for the Aluminum Extrusion in the USA?

[@PopCultureLivingRoom]

I do still recommend Ooznest. I do have a US seller, Open Builds: openbuildspartstore.com/?ref=BvQnmjqj7p98MT I still recommend Ooznest over Open Builds for most things. Ooznest's website is easy to use and they offer more options, for example Ooznest's minimum length they can cut an extrusion is 40mm and Open Builds is 100mm. The shipping may seem high for Ooznest but for something like the case in this video, the overall price is only a few dollars off of each other. For Open Builds, you have to buy full pieces and then email them to cut the size you need and have them threaded. What I do for a project is go to both sites and figure out which would be the best way to go. Usually Ooznest wins. Thanks for the question. If you have any other questions, I'm here to help.

[@r0cketride]

If I need a 24” base using 2040 profile, would I measure the base and add 20mm to front and back to account for the overlap on the frame?

[@PopCultureLivingRoom]

Thanks for watching! When you say base, are you talking about the wood board that will sit on the frame? Is the frame only using 2040 extrusions for the frame?

[@r0cketride]

@@PopCultureLivingRoom Yes, the wood board has to be 24 inches. I would be using 2040 for the whole build to display 1/4 statues.

[@PopCultureLivingRoom]

So the only difference with the frame for the shelf is the front will be 20mm longer so you would add 20mm to the front and cut the front notches 20mm longer. When I get a chance, I'll draw you a diagram.

[@neoxjin]

Is there any reason you don’t put the metal tape on the acrylic rather than the magnet tape, and so put the magnetic tape on the aluminium frame instead. Since it’s already black, it doesn’t need to have black vinyle tape put on it (where the metal tape needs that extra step) ? Thanks for the answer !

[@PopCultureLivingRoom]

Thanks for the question. There is nothing that would stop you from doing that. It would work. Though the metal tape seems to have a bit better adhesive and sticks better to things. I also prefer the look of the tape on the case rather than vice versa. It's all a matter of preference. I am always looking for ways to improve the display cases so I am trying to find new and better ways to attach the acrylic to the case. You'll have to send me pics of your case if you make it the way you talk about in your comment. I'd love to check it out. Thanks for watching!

[@neoxjin]

@@PopCultureLivingRoom thanks for your answer man ! For now I have made 2 the same size as you, with the same magnetic tape arrangement. But since I plan to make more, having an extra step less is kinda tempting, that’s why I asked you that :p And sure the vinyle is better looking, the magnet tape is black but more like brownish black so not like the extrusion for sure. But since it’s hidden 99% of the time, I was wondering if this extra step is really necessary. I am gonna try it it the other way around like discussed. I’ll send you pics if you want. I also checked other ways to attach the panel. So far I have another technique with magnet that I can also send you pictures. I wonder how moducase do to punch magnets in their extrusions tho

[@PopCultureLivingRoom]

@@neoxjin I believe moducase drills a hole and places in the circular magnet. From my experience though just having a few circular magnets like the modu case is not as strong as the metal tape method. On the original magic cases you would have to screw in a safety screw to make sure they didn't fall off. The newer moducases have a little ledge around the front of the case so that the acrylic doesn't slide down. With the metal tape method it's so strong it won't slide down at all.

[@PopCultureLivingRoom]

Please send me pics of the cases you've already made. I'd love to see them. I also do a live stream and I would love to show them off. You can send them to [e-mail].

[@rodgerq]

Excellent display and habing it floating really lifts it, no pun intended. Did you do a round up of cost by any chance?

[@PopCultureLivingRoom]

Thank you so much! At the time I made the case, I think it was $195 total. But cost depends on where you live and where you can buy the materials. If you live in the UK or EU, the aluminum frame is going to be way cheaper. The acrylic and PVC sheets will also vary depending on where you live.

[@rodgerq]

@@PopCultureLivingRoom I'm in the UK. Have hear of oozenest as well as I do some woodworking and was considering one of their cnc tables, but didn't know they did the extrusions separately until you said. Thanks again.

[@r0cketride]

Great video! Feeling inspired to try to build my own for my collection. If I attempt to build multiple, is it feasible that they share a beam to share instead of connecting to complete frames?

[@PopCultureLivingRoom]

I am having trouble picturing what you're describing. " is it feasible that they share a beam to share instead of connecting to complete frames". Do you mean sharing a beam to hang on or essentially making a bigger case instead of multiples?

[@r0cketride]

@@PopCultureLivingRoom I essentially want to build a large case divided into sections. So picture one huge case divided into say 9 cubes. Could they share a wall on the interior of the frame? Or would you recommend building 9 complete cubes and using a bracket to connect them all?

[@PopCultureLivingRoom]

I would either make 9 individual ones or 3 individual ones divided into 3.

[@estratagemamd]

May be a miss it… but regarding the acrylic sheet… you buy a single sheet and you use that single sheet by cutting it on the 2 side panels and the front panel? Or did I missed something? Thanks!

[@PopCultureLivingRoom]

I did buy 1 sheet of 24" x 72" x 1/16" acrylic and cut it down myself. If you have a place near you that specializes in plastics and acrylic sheets, you can buy the sheet and have them cut it to the sizes you need. It is much easier. Hope that helps. Thanks for watching!

[@estratagemamd]

Thank you so much!

[@danielmoring9665]

This was a great video. I think it turned out awesome! Any idea what your total cost was after purchasing all of the supplies?

[@PopCultureLivingRoom]

Thank you so much! At the time of making the video, it cost me about $195. That may not be the same now a days and it might be different by where you live or where you source your materials. Thank you again and thanks for watching!

[@ghoststriker7]

for df series, do you know what size v slots they use? Looking to add load enchantment bars to my existing cases.

[@PopCultureLivingRoom]

Are you asking for the length of v-slot? Or are you asking for the type of v-slot like 2020 for example?