DIY Custom Poker Table Upgrades - Custom Felt and Cash Drawer

Time for some poker table updates!!!
I installed a new custom felt for my poker table from www.chanmanpok... & a metal drawer to keep the poker chips in while I'm hosting the tournament & cash game!
Metal Drawer - amzn.to/3lUG7u9
Staple Remover Tool - amzn.to/3i4V63Q
⇩ MY AMAZON STOREFRONT ⇩
www.amazon.com...
⇩⇩⇩Amazon Links⇩⇩⇩
CAMERA GEAR:
Sony FX3 - amzn.to/3v18Ikj
Sony 24-105mm F4 Lens - amzn.to/3xdkR7Y
RODE WIRELESS GO II - amzn.to/3dVq1MK
My GoPro Gear:
GoPro Hero 10 - amzn.to/3DjZZOy
GoPro Media Mod - amzn.to/326tnqZ
GoPro Chest Mount - amzn.to/3sx9nss
GoPro 3 in 1 Mount - amzn.to/3uFUhSN
GoPro Suction Cup - amzn.to/2WXUYvp
GoPro Jaws Flex Clamp - amzn.to/3uWBK65
GoPro Dual Battery Charger - amzn.to/3myRAzO
GoPro Battery - amzn.to/3DtW6GI
#DIYPokerTable #PokerTable #Pokerfelt #CashDrawer #HomePoker #HomePokerTourney

[@GorillagamingNet]

Great video and thanks for sharing the info to people about our folding legs! I also noticed some comments suggesting that speed cloth isn't for everyone. We provide our own "super glide" along with our "action suede" for this reason.

[@denbo74]

Great idea! Your table is beautiful. I did this 20 years ago on a table I built with my grandfather. We made a frame for a chip rack that is very low profile…but I still feel it on top on my legs sometimes. As for the felt, I’ve never felt I needed to use adhesive. I always stretched the felt tight and it was fine. I a,so never had a felt with a design that needed to be centered though.

[@mikecoughlin4128]

I like the drawer but I would make it flush with the edge. Leg room is an issue for me due to my height. It makes me wonder about a pub table height setup like in the casinos. Thanks for the “speed felt” tip. I’m also interested in stain resistance against beer and red wine, from experience… I might consider insetting a couple small screens to display our timer/blinds app. I like the method of attachment you used.

[@BarTendor]

I loved the simplicity of the table build… I looked at your channel… did not see the build video… you should do a table build video

[@One2ManyHobbies]

I do not have a build video, don't need another table at this time.

[@thomasjosephunterburger2720]

Beautiful table! I was just looking to see videos on how to clean them and stumbled across your page. You definitely got a subscribe out of me. I’ve been playing poker for like 15yrs and finally got to host my first game ever two weeks ago. I feel I nailed it, but your setup is so much better! Love the bikes too! I got into MTBing during covid. Keep on makin vids man!

[@One2ManyHobbies]

Nice! Congrats, always fun playing poker with some buddy! MTB'ing is a fun one! Thanks for subscribing.

[@BalloonExtravaganzas]

Wow you are really talented. A step above the rest. I’m building a poker table. My second one. Could you point me in the right direction to use the folding legs that you used. They look really heavy duty as opposed to the tubular type. Thank you for any help you can offer.

[@One2ManyHobbies]

Thanks! Follow my blog - www.pokerchipforum.com/threads/building-2-new-tables-argyle-poker-night-thread.43334/

[@BalloonExtravaganzas]

Found it! Thank you friend.

[@noahfreeburger4090]

Do you have a build tutorial for the table itself? Also is there anything about the table you would change if you were to build another one?

[@theweekendwarrior6355]

Do you have a build video or plans for the table? Like the design you chose.

[@One2ManyHobbies]

No, sorry I don’t.

[@zga042]

I noticed all those matching books in your office too. what are they for?

[@One2ManyHobbies]

Lol - Day job stuff - Architect folders.

[@BeanieBots]

Beautiful craftsmanship. You have some lucky poker friends!

[@dalet7300]

Just a heads up the is a staple remover like yours but it's like pliers! It pulls and holds onto the staple at the same time. Amazon of course. The have a combo pack for $10. Your right though, there great!

[@billmangerie4424]

Did you build the table with the red plexi on it?

[@One2ManyHobbies]

YES SR!

[@billmangerie4424]

@@One2ManyHobbies do you have a video of how you built it?

[@One2ManyHobbies]

@@billmangerie4424 unfortunately I don’t.

[@coloradokid6807]

Great looking table. I have built two and have so many questions for you. I like the simplicity you have for taking it apart. Did you use plans from online somewhere?

[@One2ManyHobbies]

Thanks! No plans, built it off a raise railing design

[@brianeaster976]

Do you have a video of the table build?

[@One2ManyHobbies]

I don't, sorry!

[@alejandrovilla2979]

That looks great. I building a same poker table . I never do this job before. I have a cuestion where you buy the matt and the poker tray

[@One2ManyHobbies]

Amazon, links are in the discription!

[@markwright9166]

Great table! What’s the base made from? Doesn’t look like plywood? And you have no support to stop it from bowing so it must be strong.

[@One2ManyHobbies]

Thanks!! I have 2 layers of 3/4” plywood bolted together - there isn’t any sag. The legs are Gorilla poker legs.

[@megan6166]

Beautiful table

[@ZrKn_]

Hey, great video! I’m currently replacing the felt on my poker table. What’s the name of that spray/sticky can you used to help the felt stick to the foam? Can I get it at Home Depot?

[@julieoveracre957]

Can you give me info on the HD folding legs using with poker table?

[@One2ManyHobbies]

gorillagaming.net/gorilla-legs/

[@lukexramirez]

Awesome vid thank you! Did you happen to get table build plans off of PCF as well?

[@dchevron77]

Awesome! Do you hire dealers for your home games or take turns?

[@One2ManyHobbies]

We pass the dealer around taking turns.

[@andrewwright8619]

I went to the website to check out the speed felt! How much did this design end up costing? Also, could you please make a video on how the table was made?

[@One2ManyHobbies]

It was $250-300 roughly - check out the blog on Pokerchipforum. - www.pokerchipforum.com/threads/building-2-new-tables-argyle-poker-night-thread.43334/

[@andrewwright8619]

@@One2ManyHobbies Thanks! is the new custom felt from Chanman waterproof? When looking on the website it did not specify when clicking on "custom cloth playing surface"

[@One2ManyHobbies]

@@andrewwright8619 idk - I wouldn’t say it is.

[@pplpoker]

So after you have had this drawer in for a while would you recommend it? Would you use anything different or do anything different with your install?

[@One2ManyHobbies]

Yeah, I like it. Only negative is I have to install it each time because I like to fold my table up & hang it on the wall. This task isn’t hard. I also would like to have some custom chip draws made for it.

[@bakkaoui]

Do you have a video of you initially building the table?

[@One2ManyHobbies]

Unfortunately I do not.

[@honey-dopros1306]

Your design is amazing. Do you have a set of plans?

[@One2ManyHobbies]

No, I do not - sorry!

[@honey-dopros1306]

@@One2ManyHobbies nuts. Did you make a video of the build?

[@One2ManyHobbies]

@@honey-dopros1306 No, I did not.

[@honey-dopros1306]

@@One2ManyHobbies ok. Thanks anyhow.

[@henriquececilio1841]

hello my friend! what kind of fabric is this that the letter slides on fast?

[@One2ManyHobbies]

Speed felt.

[@henriquececilio1841]

@@One2ManyHobbies it's because I'm in Brazil and I don't know what the equivalent would be here. We have many types of fabrics...thanks for your attention!

[@One2ManyHobbies]

@@henriquececilio1841 www.chanmanpokertables.com/design

[@kanehames7247]

Do you have the design/plans for this table available? I live in NZ so purchasing tables from Chanman is a tough gig!

[@One2ManyHobbies]

No, I don't have any plans - sorry.

[@njkay0033]

@@One2ManyHobbies Seems like a step by step build tutorial would be a hit....hint hint ;)

[@beaterbagcar]

Bro I have 1 too many hobbies..... Lol sooo bad! 👍 Great channel

[@One2ManyHobbies]

Same! Obviously! Lol

[@fredlem4681]

Cool video! have you ever felted a RFID table? any challenges you faced with this? Thanks :)

[@One2ManyHobbies]

Thanks for watching! Sorry for the bad AUDIO!

[@richardrobertson4220]

Beautiful table. I’m building my own table right now and plan to use a plexiglass diffuser for my led lights. How did you avoid the plexiglass from cutting into the vinyl?

[@Jacob-ud9fe]

How about don’t be a lazy ass and take your ass on down to Wherever they sell sandpaper and I reckon just get to sanding. Quit askin stupid ass question before I knock the hell out of ya

[@tylerabbott7108]

This may be a stupid questions, but can you just drill the under drawer straight to bottom or do you have to take the whole thing apart.

[@One2ManyHobbies]

@@tylerabbott7108 the legs won’t close then, that’s why I did this.

[@andersonmantovani8521]

Good afternoon, I'm Brazilian. I really liked the video. what kind of fabric did you use in the middle of the table?

[@coopercopper-uz7iz]

how much if I ordered that same exact felt???

[@One2ManyHobbies]

It’s like $300 I think.

[@joshears2003]

Where did you get the fabric for the table? I want some design options and don't know where to look

[@xstaggsx6804]

What is your measurements from the Betting line to the rail?

[@FlameofUdun9]

What brand of chips are those?

[@One2ManyHobbies]

Apache Poker Chips - Majestic & Royals.

[@TheHurleySpecial]

What is the height on your raised rail? Specifically the shield.

[@steveconnolly22]

Awesome video!

[@One2ManyHobbies]

Thanks bud!

[@Honolulu_Blue_42]

where are the table legs from?

[@One2ManyHobbies]

Gorilla Gaming poker table legs.

[@gregm4427]

what is the acrylic for the raised edge

[@marksimpson2321]

Your table looks exactly the same as tables available to buy. Did you build it yourself?

[@One2ManyHobbies]

I built mine myself.

[@Dreamville512]

Why not just make a well like a regular casino table?

[@One2ManyHobbies]

It takes up room on the playing surface, that would work if we had a full time dealer and we didn’t play tournament we’re the player deal.

[@nicholasgraf9267]

I wish you built poker tables lol

[@One2ManyHobbies]

I do commission projects if they work for both myself & my client. Send me a message on IG - One2ManyHobbies

[@nicholasgraf9267]

@@One2ManyHobbies Adding you now!

[@One2ManyHobbies]

@@nicholasgraf9267 ok, send me a message please

[@alexduque3105]

Can you build me a table? Please

[@charliecaltagarone9234]

Please don't throw the old felt out. I would be glad to take it off your hands. Great video

[@One2ManyHobbies]

Sorry, little late.

[@jamesalmas4287]

I love your tables. But as someone who worked in a poker room for 3 years and on tons of tables with different materials...speed tables are the worst thing that ever happened. It feels horrible on your hands, takes the skin right off your finger tips, and the sound it makes causes my spine to chil.

[@alexduque3105]

That looks like a gorilla table

[@Jacob-ud9fe]

I just see a table full of donks at a table made by a donk.

[@One2ManyHobbies]

Thanks for watch donk!

[@huydbui]

Do you have the video on how you built this awesome table? Update: nevermind, was this the one you bought from chanmanpokertables you mentioned in the comment?

[@One2ManyHobbies]

Sorry, I dont.

[@andyleo8940]

What kind of felt is it n where did you get it

[@One2ManyHobbies]

It's speed felt, and I got it from ChanmanPoker website.