(Diy)Driver information center switch install on my 2013 Chevy Tahoe ppv... “Please subscribe”

[@johnhorton4378]

Thanks bro, someone told me it was a bulb, it's a whole switch. ill let you know when I get it replaced! 🤛🏾

[@DawhipStop]

@@johnhorton4378 link is in the description bro 🤜🏾🤛🏾

[@lynnzimmerman4853]

I have a 2013 Tahoe SSV and I installed the switch since the display was in Spanish. I used a Dremal tool to cut the hole and then I glued the switch in and it works great. Panel tools make removal a lot easier.

[@DawhipStop]

Yessir🫡

[@mac4782]

I'm going to install mine soon. I'll send you a pic of my PPV I just installed some 2" drop spindles on the front. Since we're both on 26's you'll see how low it sit.

[@DawhipStop]

Ok that’s cool bro ..I was thinking about doing like a 2/4 drop my self

[@lynnzimmerman4853]

I have a black 2013 Tahoe SSV. I live off road, so I find that keeping it as high as I can works best for me. I put on 10 ply tires with offset rims. Added flares to cover the additional tire exposure. Installed the DIC and will soon install the EONON radio, etc.

[@DawhipStop]

💯 One part at a time!!!

[@juliecossey9127]

Why did you have to put the switch on the Tahoe in the 1st place? How do you change the messages On the - before you installed the Switch?

[@juliecossey9127]

Thank you I just realized that it's the police packand there is no switch to change those messages if You don't install that switch. Thank you so much for your video it has definitely been a big help My vehicle is a police package as well and now I know what I need to do thank you

[@DawhipStop]

No problem 👍

[@keithblume5159]

Love this video. Is your exhaust original?

[@ramcholan2034]

Thanks for the video, I noticed midway you were able to separate the small trim panel from the whole panel, was it easy splitting without breaking?

[@DawhipStop]

Yes it’s pretty ez It has two lil plastic wells on the back that would need to be removed

[@ramcholan2034]

@@DawhipStop thanks, are those wells glued or snaps in. I just ordered the DIC, planning to install once arrives. thanks.

[@DawhipStop]

@ramcholan2034 I wanna say both But it’s not hard at all 15 minute job 👍

[@ramcholan2034]

@@DawhipStop thankyou

[@DawhipStop]

@@ramcholan2034 anytime! 🫡

[@DieseldutyLovesJesus]

just curious did the vehicle operate in v8 mode at all times with your Range installed, I have the exact same reason to install the buttons, I would like to verify that its always in v8 mode cool video thanks

[@xaveburgunder6369]

How did you secure the switch to the back of the trim panel?

[@DawhipStop]

I Super glued the edges, works like normal

[@dawinsantos77]

Where did you get that panel control?

[@DawhipStop]

eBay, link is in the description

[@AiyaRyder]

What all did you need to install the 2din stereo? I just bought a pioneer and I’m putting it in my 2013 Tahoe PPV it already has a an after market stereo. I just want to upgrade. Do you have an install video for it?

[@DawhipStop]

No ,sorry unfortunately I do not have a video .My local audio shop had installed it free when I brought it,

[@kevenvillalobos9562]

So your truck didn’t come with one ?

[@DawhipStop]

No …my truck is a ppv

[@kevenvillalobos9562]

@@DawhipStop where’s the link didn’t see it in description

[@DawhipStop]

Give me a sec!

[@DawhipStop]

The Link is now in the description!! 🦾

[@jasonphillips7552]

Where did you get the trim piece from?

[@DawhipStop]

Trim piece was aready in the truck, I just cut a hole in it … 👍

[@jperez1083]

Did you ever find the trim panel. I need the number for the silver panel with the cut out

[@DawhipStop]

Check eBay or Amazon 👍 I had cut mine out myself

[@dmane_twino]

A bro I think I'm sure once ur in park it will be in v8 mode into u drive in traffic in once u let off gas pedal it will be v4 mode onto u foot it again then v8 not quoting

[@DawhipStop]

Yea that’s how the AFM works, but once you get the Range it will stay in v8

[@dmane_twino]

@@DawhipStop you'll knw once driving

[@DawhipStop]

Hell yea, you’ll feel the lil difference & if you have exhaust you’ll hear it too

[@DawhipStop]

& if you have a dlc switch it will show you as well

[@dmane_twino]

@@DawhipStop 💯

[@Catholic1391]

Guess am lucky I have that already 👍 And my ranger technology is on the way.

[@DawhipStop]

👍👍👍

[@satyrangel2730]

thank you for this upload i have a 2009 tahoe ppv with 80.000 miles ,and i love it. but i also order the part SKP SK953351 {15947841} Driver Information Display Switch off of rockauto .

[@DawhipStop]

No prob👍thanks for the support