DIY Dust Cyclone | Using $20 Kit

Instead of spending $170 for a dust cyclone, we did another DIY project and made our own 4 inch dust cyclone using a $20 Kit. This does not include the bucket, which needs to be purchased separately even if you buy the pre-made cyclone.
-------------------------------------------------------------------------
Links to items used in the making of this video
■ 4" Dust Cyclone Kit amzn.to/3i2Il8G
■ 4" Thumb Screw Clamps amzn.to/3nwxKUD
■ 4" hose Splice amzn.to/3i18h4d
■ 4" stretch hose amzn.to/2K1dBYV
■ Wen Dust Collector amzn.to/3i6iFb5
Filming Equipment:
■ Canon M50: amzn.to/2k7JnGN
■ Lighting Kit: amzn.to/2lHeKsd
■ Rode VideoMic Pro Plus amzn.to/36seAbs
■ SanDisk Ultra 64Gb amzn.to/32VphkF

[@Poor_Mans_DIY]

I am usually skeptical of real inexpensive kits but this really worked incredibly well. (I am now determined to try something similar for my shop vac)

[@IrishChippy]

Nice job guys. Many woodworkers overlook the importance of dust collection and respirators. The fine dust from sanding can be extremely harmful. My father told me that a few years back, and now he is 85. When I started out here, I built a separator for the Ridgid I had just bought. It is a simple thien baffle made from a chlorine bucket. Best thing I ever made. I was my first youtube video, and the video itself was very rough, but the finished product was a godsend.

[@Poor_Mans_DIY]

Well said!

[@JustMightDIY]

Our jealousy of your dust management grows! Great job on this one - I love how you took a lower cost approach, and the decision to use attachments vs. running hoses all over the shop is a great one. Totally something I can see us doing, too. Cheers on another awesome video!

[@Poor_Mans_DIY]

We always go for the Poor Man solution first only to learn that the high quality items actually are better off in the long run but in this case, I think we hit a homerun. :-) Thank you for your support as always!!

[@WoodChuckCreations]

To solve your space issue, you could move off the island to a place that has more land, LOL. Great job guys!

[@Poor_Mans_DIY]

Trust me... we have compared costs of our homes against homes one the mainland and it would be a great deal but... who wants to leave paradise? 😄

[@WoodenItBeNice]

Hi Both, Fantastic cyclone. I guilt something very similar for my 1st workshop and it served me really well. When I built my new workshop I put in a full 4" system but I still have my original cyclone as a back up as well. Great video as always. Take care both. Cheers, Huw

[@Poor_Mans_DIY]

I am hoping this serves the Poor Man workshop and not have to put in a full 4" system. LOL Thank you for watching as always. Very much appreciated.

[@NomasterCreations]

I've been so busy recently and haven't had time to catch up on everything. I'd forgotten how good your videos were, keep up the great work and stay safe.

[@Poor_Mans_DIY]

No need to feel obligated to catch up on everything. We all have life to worry about. Thank you for watching and for your kind words.

[@HighCaliberCraftsman]

For an inexpensive rig that thing works great!

[@Poor_Mans_DIY]

You are absolutely right. We are definitely pleased with the outcome.

[@KirstiePervinDavies]

Neat set up!! No doubt it will make a difference. Reduce the dust by a good percentage for sure! It’s hard to capture the fine dust even with a big expensive set up. Most industrial shops still have need an air filter system in the shop for the fine dust as well as an extractor for the bigger particles. So I think you’re right to say it will make a difference. Super job once again both! No more saw dust and chips flying around, plus emptying a bucket will be so much easier than emptying a dust bag no doubt✌🏻👏🏻🙌🏻

[@Poor_Mans_DIY]

Thank you Ms Kristie. The more I learn about the dangers of sawdust, the more I try to minimize it. I now need something that works better on my table saw. :-)

[@Everythings_Adjustable]

Useful addition to your workshop, I made one for my shop vac it makes finding sucked up bolts and screws very easy 👍 😁

[@Poor_Mans_DIY]

I use my car tire to pick up lost screws. The screws sink into tire rubber nicely so maybe I dont need a cyclone for my shop vac. LOL!!! 😂

[@Everythings_Adjustable]

I know what you mean, that's so annoying when that happens!!!

[@TheGrantAlexander]

Wow those are some sharp scissors at 7:39! I am sure this will be so much nicer for you! Emptying a bucket looks so to be so much nicer than a bag :)

[@Poor_Mans_DIY]

I just cut a little piece of plastic that was hanging on. The main thing I am looking for is the filter will not clog and will actually collect tiny particles and all larger pieces just drop in the bucket. Then I can breathe better. 😃

[@karlpopewoodcraft]

Brilliant result guys.

[@Poor_Mans_DIY]

Thank you so very much!

[@OzSawdustMakers]

Great cyclone set-up, well done! 😁✌️

[@Poor_Mans_DIY]

Thank you, so very much.

[@MoscaWoodworking]

I have the same exact setup and works great for collecting chips from the jointer/planer. The only difference (which is the real game changer), is the 1 micron dust bag I installed over the original one (which is 10 micron I believe). This allow to really catch very fine dust particles.

[@Poor_Mans_DIY]

Would you believe I ordered a dust bag? LOL. I was going to get the 1 micron bag but I read so many reviews indicating the 1 micron bag clogs quickly. I should have asked you first. 😄

[@MoscaWoodworking]

@@Poor_Mans_DIY what micron bag did you oredred?

[@Poor_Mans_DIY]

@@MoscaWoodworking I ordered 2 micron for my dust collector bag but I also ordered a new filter for my shop vac and I found a place that make a vacuum bag the works inside my shop vac. I hope all these changes, can help keep my garage cleaner and the air even safer. (but I will continue wearing my full face mask)

[@MoscaWoodworking]

@Poor Man's DIY 2 micron is good enough ;)

[@o.g.bwoodwork]

Great cyclone guys. I desperately need to upgrade mine, as it’s only about a 20 litre container and a lot of material is making it through to the vacuum.

[@Poor_Mans_DIY]

If you decide to upgrade your system. Make a video... we would enjoy seeing what you come up with!

[@spindlesworkshop9744]

hey those separators are awesome. as far as air quality you can buy bags that sort smaller size dust

[@Poor_Mans_DIY]

Thank you, sir! (I have already ordered new filters and bags for my collector and vac. LOL)

[@GrumpysWorkshop4]

Interesting video. Been looking at something similar. Normally you see people using barrels with the cyclone on top. Seen the kits with the 2 ports recently like this. Seems like a great option

[@Poor_Mans_DIY]

I looked into the various cyclone types and figured it would be worth giving a try and if it does not work, we can go with the top mounted type. Thus far... I have no regrets and am thrilled with the cyclone.

Hello Richard and Jennifer, Cyclone great need in the working environment. You have created a great cyclone at low cost. I made a different cyclone last year. And I am still using it. If you want to watch, you can see it on my channel. Good job. Congratulations. See you. Stay healthy and happy. Big greetings. Best regards. Mehmet....

[@Poor_Mans_DIY]

Thank you so very much

@@Poor_Mans_DIY 😜👌

[@StanCrafted]

I should do something like this...sawdust gives me a headache...

[@Poor_Mans_DIY]

I do get headaches and I never put them together with sawdust but that is definitely something I need to look into. (Then again my new full face mask seems to keep everything out. 😄

[@LonghornWorkshop]

Nice review and install of the cyclone. You still loving the wen dust collector?

[@Poor_Mans_DIY]

Thank you, sir. I definitely love the Wen dust collector. It is quite powerful for such a low cost. There are many people who have complained about the clog. The company installed a screen just before the fan blades but the holes are so small that things dont pass through. I saw some people remove the screen and I tried that as well and it works beautifully.

[@Bambamhere]

How is the dust collection holing up today with the yellow separator. Would you recommend it

[@Poor_Mans_DIY]

It is Perfect. Works like a charm. I have one for my shp vac and another for my dust collector. Highly recommend it.

[@robertcrowe984]

What is the manuf. and model number of exhaust fan?

[@Poor_Mans_DIY]

Truly sorry for the delayed response. I have to admit I am a little confused by your question. I do not recall referencing an exhaust fan. If you are referring to the giant vacuum like item, it is a dust collector. Here is what I use.. amzn.to/4b6Wk7J. It can be mounted on the wall as well. Thank you for watching our video and for leaving your question. If you have other questions. Feel free to ask.

[@josephg4924]

👍

[@Poor_Mans_DIY]

Thank you Mr. Joseph!

[@Bambamhere]

Where did you get your yellow drum

[@Poor_Mans_DIY]

I purchased the drums on Amazon. I am sorry but I don't have easy access to verify, but I believe I placed links i the description of the video.

[@delilapipoly]

👌👌👌👍🥰😍

[@Poor_Mans_DIY]

Thank you so very much for the kind emojis! We actually do appreciate it very much!

[@FixitFingers]

Im gonna add something similar in my shop this year too. I have to ask though if the ironic t-shirt choice was intentional? 🤣

[@Poor_Mans_DIY]

We look forward to seeing you create a dust collector cyclone this year and ... why would an old man intentionally wear anything ironic. LOL!