DIY easy cabinet hinges in a camper van

Simple to install hinges but useful. These are called Concealed hinges. Here's Amazon affiliate link for this if you're unable to get it from the Home Depot amzn.to/3zTxHcJ.

[@user-yy1zi2op7r]

I don't understand why some people always dislike other people efforts I really like this video ✅and helpful 👍

[@BoChuonOUTDOORSVANBUILD]

Thank you so much.

[@happyhornet1000]

Thanks for your help with these hinges. Wasn't sure what to do with them until I watched your video. Thanks from London!

[@BoChuonOUTDOORSVANBUILD]

Nice. Glad it's helpful.

[@scampbell6554]

Thanks very much. Best explanation I could find. Now have 2 fitted doors hanging perfectly.

[@sarahbosq7585]

Thank you so much !!!! I have those hinges for a project i'm doing and i could find a tutorial on how to install them until i found yours! Very helpful and very well explained !

[@deanlaxer608]

This guy is cool. Sympathetic and friendly, nicely explained too. This was a very useful video, thank you 🙂

[@martinbuss6818]

Thanks I purchased these hinges and was not sure the install process your video was excellent and very helpful, got mine from wickes hardware store in England.

[@william7757]

Exactly what i needed to know. I have the same issue with my cabinets in our travel trailer. Was thinking those angle tension holder things or gas shocks to hold the door up but these are perfect. Thanks!

[@zjparker5310]

Thank you so much you made my day I ordered these but the instructions were so hard to follow, I used your method and my doors are up and look great. Many blessings to you and your and stay safe

[@BoChuonOUTDOORSVANBUILD]

You're welcome. Glad it worked out for you. Thank you

[@LucysVanAndale]

I love watching your instruction videos! You give a brief explanation which absolutely is helpful. These cabinet doors are beautiful. I used to have knotty Alder in my home.

[@BoChuonOUTDOORSVANBUILD]

Thank you

[@petermornington9118]

very , very helpful Bo, thank you for showing me how to do this! Brilliant

[@stevieburrows3953]

Thank you all the way from England.I am converting a LWB Mercedes Sprinter to a campervan.Your how to vid made this job easy

[@hennnnerz]

Did you manage to find these in England? I am struggling! Maybe you have a link please?

[@bonglaortv8844]

My brother is so smart in DYI

[@doghouseriley4732]

The initial installaion is wrong. You should only screw in the slotted holes, then adjust the hinge until you are certain, then screww in the the round holes.

[@adamkowalczyk9468]

Thanks a ton! This was super helpful, I can finally finish up the cabinet I am working on for my living room.

[@stolenorange]

Very satisfying job

[@MudRFunR]

Exactly the video I was looking for, thanks for sharing!

[@sheyedlington9046]

Fab job, easy to follow you. Great van. Thank you.

[@redizeli3660]

Thanks a lot buddy! That's very kind you share your experience.

[@livinonaventure]

Very helpful. Thank you for sharing!

[@catritz]

I've been trying to figure out what hinges to use for a pull down cabinet door, without counter sinking them... I was considring non-mortise hinges but part of the hinges show (like your old hinges) Would these 90 degree hinges work? p.s. Excellant video and instruction. Thank you

[@Woodyt]

when you show which side goes on the door, it looks like you put the wrong side of the hinge on the door side. It says on the back side of the hinge door, and you put that side on the cabinet not the door ?

[@Woodyt]

How did you know to measure 3/4" from the edge of the cabinet door to place the hinge ? I bought these to put on my cabinets that I'm making now for my van. Thanks

[@BoChuonOUTDOORSVANBUILD]

There are longer holes that designed to be adjustable for your screws in case they door is too tight and close.

[@felixbrooks7464]

Thx!!! I just got 8 of these today...👍🏼😁👍🏼

[@stevenbelshe2478]

Where they at your local hardware store?

[@DevilTravels]

The problem with these hinges is the cabinet header board has to be twice as wide as typical cabinets. Most RV cabins headers are 3/4" wide.

[@Niafifia]

Thank You!

[@alexarmstrong4166]

Cool video, thanks for sharing!

[@janareinberger4844]

Thanks

[@yphasukyued]

Good improvement!

[@d.a.tsun5104]

I'm not sure if you or anyone reading this comment know the answer but I'll ask anyway. I'm thinking of using these hinges on a cabinet with vertical stacking 'cubes'. So the doors will be side-by-side in vertical order. What is the gap I need to leave between the bottom of the door at the top to the hinged edge of the door below it, so that the doors can open without bumping each other?

[@TukangNotoHollo]

mkasih tutorialnya

[@zachweber1198]

Is the overlay at the top and bottom the same? Is it the amount you measured on the door? Thanks!!!!

[@_teasipper_]

thank you so much for your effort!

[@jray1429]

Could you use these on a cabinet door in the house? It would be for doors that open left and right instead of up.

[@BoChuonOUTDOORSVANBUILD]

It's designed for up and down doors if you use it for side way it can only open 90°

[@Sixty5South]

J Raymer - you actually can! I actually used them on a cabinet setup myself. You can see the optional uses in the photos on these: www.amazon.com/gp/product/B01IY8CTLM/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1

[@miranduri]

Are they only supposed to work when mounted? I tried moving them with my hands and they won’t budge.

[@BoChuonOUTDOORSVANBUILD]

Oh they're strong you can't fold until you mount them

[@miranduri]

@@BoChuonOUTDOORSVANBUILD Thank you.

[@Guigui_82]

I had the same question. I'm glad you asked. 🙂

[@gorillacyclist]

You can bend them but takes a special technique. Hold them thumb to you centre then push your thumbs up like breaking chocolate. You grip the other side flap with your next finger.- Took me a while to work it out

[@anthonyprice434]

I need to buy them, but I live in Singapore. If you have the brand and serial number or the common name for it plus where you bought it I'll see if I can get them sent to me.

[@gpswildride]

Very good video. I was wondering how the hinges are doing after a couple years. Also, what is the minimum thickness needed for the cabinet box to screw the hinges into. Thanks so much!

[@BoChuonOUTDOORSVANBUILD]

The hinges were still good but I upgraded to a soft close kind. You need a 3/4" thickness

[@RC-go2kl]

Nice video! Ty!

[@rjbinning7535]

Good clip 👍🏼

[@kalam518]

What is the official name for this type of hinge?

[@BoChuonOUTDOORSVANBUILD]

Surface Mount Soft Close Hinge

[@libran3051]

Nice one cheers :)

[@sustainableselfrelianceire8768]

the background is way too loud very difficult to catch what you are saying

[@dassalazar3850]

Are they soft close system?

[@BoChuonOUTDOORSVANBUILD]

No, these are not. If you want the soft close ones here's the link. They're exactly the same size. www.amazon.com/dp/B07G41JNGT/ref=cm_sw_r_other_apa_i_DxIpCb43F0W69

[@dassalazar3850]

@@BoChuonOUTDOORSVANBUILD thanks for your help.

[@enriquesartagoda9389]

Saan pwde makabili Ng hinges

[@sstatic6093]

will it pop open from the vibration

[@BoChuonOUTDOORSVANBUILD]

No, nothing has open or fallen off

[@ryanh3285]

They are cool do the have any adjustment on them?

[@Bokhmercamping-outdoors-travel]

Not this kind. No adjustments

[@diederichabels8119]

I heard very good opinions about the Woodglut plans.

[@smshep352]

Sorry, the background music is too loud and I couldn't hear anything you were saying.

[@BoChuonOUTDOORSVANBUILD]

Sorry that video is so old. I will make a better one.

[@kevinrobinson3013]

Sky news live

[@josefinasanchezsalinero4352]

Traducir

[@mcnastyguitars]

Don’t need the loud annoying music

[@suadgrom]

U should play louder music

[@DanRom1962]

Why the annoying music?!!!! Lower the volume in your production as it is difficult to hear you with that stupid music not exactly in the background!!!

[@BoChuonOUTDOORSVANBUILD]

You're welcome