DIY Electric Bike Build (homemade ebike / CyberBike) from

[@skucera8116]

Love it! I want one. In my state, this is a motorcycle because of the power and speed, so please think about adding turn signals, reflectors, and a license plate bracket. 👍

[@mrwave9475]

I think is impossible without VIN code, its homemade, so no VIN code

[@Jeysongonzalez490]

My respects to Ladi’s engineering skills, really every video is something!

[@jamescole6846]

Been riding ebikes for 7 years now. First was a conversion, 2nd was your ebike 2.4 frame and 3rd was very similar to this one but using Qulbix 140 frame from Australia with a 5000W motor and 19" moto tires and rims. Mine will do 58mph and it's scary but I loved it. I have about 700miles on the 1st one, 1200 on the 2nd and almost 2000 miles on the Qulbix so far. all my batteries are dead right now but I see on your store you sell the one I want. so thanks for the video. BTW. This was a very nice build. Great job. Gave me a few ideas for my next one.

[@pamelakilponen3682]

Easy if you have a shop and all the tools and equipment. Not so easy if you live in an apartment complex.

[@ladiandmargaret]

we've had many customers build CyberBikes in their apartments or garages. Definitely helps to have tools already available, but we have complete lists of all the hardware needed for a project like this. The worst part would be lugging all the parts up the stairs of a complex (like the battery) 😅

[@a-aron2276]

Sounds like a you problem, it's actually a simple kit. It's all basic tools. You'd manage it on a coffee table. My shed is 5m² and I've built 4 bikes in it. The first battery I did, I did on the floor of my living room. Stop seeing problems and start thinking about the solution to it. Edit: looking back on this comment I actually just wanted to add that the top part is just supposed to be in a joking manner, sometimes I forget that that doesn't come across as easily in text format.

[@ernstheimlich7257]

@@ladiandmargaret that, and getting the finished project back to ground floor on slippery stairs. Ask me how I know 😋

[@roodick85]

Lol built mine in the living room actually two of them

[@omarfayad4720]

Not easy if you live in a country that has an economical crisis but the most important thing is that not all parts are available locally

[@johnnyc.3261]

Really nice build. Most people use hub motors on these but I like these mid drive setups. Thing looks sick.

[@shawnsebikesandstuff15]

Great video thought I would never see you build any bike again 😂 and which was the reason I started watching this channel 5 years ago

[@clemonsjoey]

Great video guys and Pavel has really turned out to be a great employee over the years, he’s got the building process down on your bike. Wish these had working pedals to fall in the ebike loophole for the states. Europe is not as Ebike friendly as it is here, so we really don’t have to worry about how powerful something is as long as it has pedals that can move the bike(even if barely) under human power;)

[@nothingbutthisthatandtheother]

Same in Canada. As long as it operates as a Bicycle on demand meaning it can have removable pedals, and has the pedals on hand it is an E-Bike it also says in Canadian law however it can not have a shaft output power of greater than 500 watts mind you. But these get huge attention from cops constantly they are a disease now whereas converting a vintage Scooter the cops don't bother with em' they reckon it is not going anywhere in a hurry lol proper sleeper

[@thebatlwgn]

I''m kind of surprised theres so much finish work needed on the frame assembly. Maybe I'm out of touch with E-bikes but i would expect a lot of those holes and trimming to be done by the mfg. That could also be my own lack of confidence in my finishing skills haha.

[@orangefan044]

these are made for other bikes, he uses them to make the build less expensive,

[@romanhavlas6107]

Czech Republic is a world powerhouse in the production of premium EVs! This bike is sick!

[@thegrave2000]

I see you improved your design and components over the years which is great. Ideas for a few areas of improvement, if you allow me: 1) Consider a double kickstand, please. This is a very heavy bike, kickstand like this is just too flimsy when the ground is muddy, sandy and so on. Besides this, a double kickstand gives you a chance to remove easily a front or rear tyre in case of a flat or something. 2) Consider an option to have the charger outside the bike. Imho this is unnecessary weight you are dragging all the time with you, decreases your range and and makes the bike bulkier and more difficult to handle. Not to mention having a 3kW charger in a non-ventilated area is not the best of ideas imho. 3) Consider having an adjustable current charger. I also have an RV (live in it actually) and having a 3KW inverter is really rare for guys like us. Not to mention you'll need to spread this load between at least 3xLiFePO4 batteries if you don't wanna kill them quickly. 4) This is probably a tough one but I gotta say it - consider having a removable battery. Makes loading/unloading activities in the van much easier. Also you can keep the battery in a well heated area during winter months which is not usually the case with your cargo area. I saw your build with the lifting bed - awesome but I think you'll soon realize you need this: www.24mx.co.uk/product/proworks-foldable-loading-ramp-180x21-cm_pid-PIA-48959 And this: uk.riskracing.com/products/lock-n-load-pro-strapless-moto-transport-system Your bikes are just way way too heavy to be left aside on the walls like this. You start hitting bumps on the road and they'll go on the ground, trust me. 5) Another thing that does not inspire much confidence in me is the swingarm. It looks a bit flimsy for such a heavy bike. If this bike goes mass production and people start jumping on it...I don't know. Now some questions: 1) Can you share tyre sizes and dimensions of the bike shown in the video? 2) Fork and shock models? 3) Not familiar with the Nucular controller but I guess you can program it for lower power settings? These 20-something kilowatts are just way too much for my liking :) 4) Max regen you achieved with this controller was about 40A, is this correct? I'm afraid this is a bit too low for a bike this heavy. Friends are using Torp TC500 on modified Surrons and regen is set to 70A at which point the bike starts dragging its tyres on steeper descents (which is not great either) but bikes are still much lighter than yours. I think 70A would be the minimum required for your bike for serious descents given its own weight. 5) What material is the frame made of, looks like steel to me? Keep up the great work and videos!

[@dabasish215]

ষ😊 ড

[@testtor2714]

The bike is extremely light, not heavy. It's as light as the lightest enduros. Having a center stand on an enduro is a huge no-no. You never put a center stand on an enduro, always a side stand. The reason for this is the very reason you used to argue for a center stand. You can always use a side stand but you can only use a center stand on flat and stiff ground.

[@kevinray5049]

I’ve watched this channel and now I have bike faster then this channel. Thank you for you content it help me a lot .

[@DrippyHarryPotterObamaSonic]

Very impressive man. I'd probably be able to do this in about a million years

[@النوتفوقالجميع]

Beautiful and wonderful work, thanks for what you offer this channel

[@voodoochild6741]

This is going to be a project I will be doing! I can't wait.

[@e-bikerbulgaria]

I wait for that self designed bike frame ❤ Make it happen. Love the content.

[@phatman3573]

Best build I’ve seen to be fair…..

[@thekid8703]

Watching from the Philippines ☺️

[@nehemiasdasilva8817]

Parabéns professor, ficou perfeita ,Deus te abençoe nos projetos, abraço aqui do Brasil 🇧🇷 🇧🇷 🇧🇷 🇧🇷 🇧🇷 🇧🇷 🇧🇷 🇧🇷

[@Ravisahu010]

Hiii 🌟 Maybe I 😇 am the only one who watches your ❤️videos, is anyone from🤔 India?

[@Ravisahu010]

i like 👍your each and every video specially ebike video 😇

[@bobongbmx]

Nice build!

[@jcc777]

Nice bike. And well, I completely understand the engineering advantages to moving the motor out of the hub. The thing I like the most that my E bike is the silence, which is why I would be real hesitant to move away from the pub motor to run with a chain, if the carbon fiber belt drives turn out to be great, that would be another consideration.

[@alexchavosaurus9041]

I am in the same boat. My 5000 Watt Stealth Clone is absolutely silent. Its so good when the bike is so quiet, you can hear the slightest brake squeaks rather than the motor haha

[@bikeoclock_show]

Mega dělo!👏🏻🔥

[@dominikpuza353]

Jj je to tak něco takového bych chtěl

[@garenkarapetian709]

Me thinking: There could be a real market for Yamaha Chappy or Honda Chaly sized electric mopeds especially within the van community, as long as they satisfy certain criteria: * length 145-157cm or shorter, 105-110cm wheelbase * seat height 71cm or lower. * collapsible (or rather, Reversible upside-down) stirring fork, so that it's max-height can easily fit in most van garages * small fat wheels * 2 seater (collapsible backpack trunk) * collapsible foot-rests * small shopping basket on the front * relatively lightweight (~40-50kg) - so that can be easily lifted or put into van-garage with an unfolding ramp. * cute looks!!! * shipped with easily installable unfolding ramp! Would be a feasible solution for scenarios where you arrive at certain locations (urban or rural), park your van/home and go explore the local village/town with narrow roads and small shops, or local forests and beaches that can't be easily accessed on small dirt paths.

[@ericthedesigner]

I'm counting the days til I can order a battery from you!! Been a fan for a few years ever since I found one of your bikes online. I've been riding electric on and off since 2013 and full time since 2019! Haven't started my Acura RSX in 4 years now accept to move it around the yard and change the oil. I'm thinking of converting it to electric and selling it..

[@noahpichardo2284]

AWESOME BUILDDDDD

[@rebeccadubois8270]

Needs clear side panels to show that battery and cool colored tape. Like a pc tower with led's

[@adventuretime6017]

Nice to watch the video, really good work, inspired me to build a DIY e-scooter myself. ....!!!😎

[@lorenzorodriguez3429]

I like it 🤔👍

[@outlawebikebuildshow492]

Nice work.

[@YTICA]

I build this same cros cycle for my kids and i can say its preetygood soo nice job man keep good work

[@NinaThoren]

Starting to get a little bit sick so this was great timing, don't have the energy to do much more than watch KZbin at the moment♥♥

[@lordFury]

Love your channel

[@mattsupertramp6506]

Awesome bike man! Planning on building one later in 2023 when I have the money. Does it support any security features like a key or alarm system? I noticed the ignition is a push button. Greetings from the USA!

[@andrey.summer]

Amazing!

[@candreminc843]

Czech moto 🔥👍

[@jakub1755]

Pekna práca len vyzerá to kuz zložitejšie ako 4.2 možno v budúcnosti postavím 👍

[@geraldgikonyo9811]

Amazing bike my friend. Now I was wondering whether I can get it shipped to Kenya. And if possible can you kindly give me the total cost. Thank you sir.

[@yodasbff3395]

Nice bike. 👍

[@Peter_Grekov_91]

Very good 😮

[@Gallardo6669]

Is it using a 219 chain???- Good job

[@williamcarroll5402]

The battery is the thing that scares me

[@LordDouglas83]

Noice!

[@IsmailSiddo]

I like this your bike

[@wayneyoung5959]

Awesome.

[@markhall1216]

I bought one of your cyberbikes off my cousin in Birmingham UK, I've watched you and your channel and I was absolutely smitten! Until my cousin wanted to buy another car, he sold it to me , in London, it's the baddest e-bike I've seen in London! I love it like hot food! But in the future I want to buy a back indicator light, and the package for about £200 for all the information necessary to understand everything about the bike you created ! Your so skilled bro , nuff respect to you , I love this bike it's off the hook ! ( I got the 27,000 version) how much is the rear light with indicator, I need 1 for winter! Can you let me know please 🙏

[@nothingbutthisthatandtheother]

Very cool for bicycle! My 1964 Lambretta GT200 is 72v using a 120 ah batt, 0-100 kph in 1.2 secs top speed 185 kph Wish I had half the knowledge of this young fella when I were his age! Nice work lad! Hope that's a LiFePo4 batt I will never waste time money or my energy on a crappy Li Ion battery ever again far too dangerous and volatile.

[@3DPSpro]

Are there any unbiased reviews of the Cyberbike or any bikes listed on MySuperEbike?

[@Kenoathy]

I have not found any but I did find that most of the parts are made in the Ukraine by a company called eleek

[@testtor2714]

@@Kenoathy For example what part?

[@SM_TheTraveller]

Great 👍🏻

[@dr.fancyngandwe4129]

I love this so much 😢I wish I could build mine but I can't afford it 😢

[@divekatdreaming]

Awesome!!!

[@xpndblhero5170]

I'd love one of these for where I live in PA in the Appalachian mountains, the roads are filled w/ potholes and mostly hills so I'd need something this powerful but, as w/ most people, it would need working pedals to be a bike and this thing would be perfect.... Any information on the bike would be greatly appreciated. 👍

[@AAs-vb7pv]

Do thay have a pedal kit option

[@Antoine-ek2mf]

Hello, i would like to know what brakes and what fork you used to build the bike ? Would it be possible to have references or links to find these components ? Thank you very much for your feedback and congratulations again for your project and your video !!

[@DerUnbbekante]

Just by looking at it I would guess that this are forks out of a 80/85cc dirt bike. Regarding the brakes, just use the ones that fit the fork. I think the most kost effective way of getting all those parts is to buy a donor bike with a blown engine.

[@cliffcampbell8827]

Did the complete bike show up as a kit or did you have to source most of the parts? How much was the total cost of that build?

[@h-prib9304]

Sorry to ask, bro... do you made the frame by your self or bought it?

[@bramalbers580]

Can you also buy an already built one or maybe in the future

[@Fredzor96]

Well in my country i would bet i would cost the double just to homologated, insured and registered.

[@shirishuppin22]

I wanted the complete guide to build this bike, requesting to share me the details, thanks you

[@shreyashmane903]

Great work. Can you tell how much time and money spent on it?

[@MrFartism]

I built my own 72 pit bike. Just took the engine out and put an electric kit on it. Does 55mph it's purely for playing around the quarries and off road stuff.

[@davideoman1000]

Hi, not sure if you will ever see this, but where can I get the that bottom bracket bolt adapter to take 14mm pedals instead of the 8mm bolt for the cranks?

[@marcbou]

Awesome you now offer fully build bike in N-A !!! Around how much shipped to Canada?

[@loveoflabor3780]

Hey I just need the frame

[@juliemac5604]

Hope you are enjoying your honeymoon!!!

[@jacksondebbarma00]

❤

[@JohnBowl14690]

Really nice bike! For me nah....I'll just spend $5K on a sur ron style ebike. Will take me 3 months to do this....and won't come out nice either. But I'm sure this would be fun to mess around with for a project.

[@christians6350]

please @GermanDepartmentOfTransportation make these things street legal!

[@felixb.59]

Would be epic, but ladi won't be able to afford all the required safety and WMCT product testing. And even if he did, he would have to install motorcycle brakes with ABS and certified components like the engine, tires and so on for the bike to be registered as a 125cc equivalent. Otherwise it would be limited to 40kmh, which really sucks, because if you bypass the speed limiter, like you easily can on the smaller Surron bikes for example, you can get into some serious legal trouble for doing so. There's hope though, because the newly announced Surron ultra bee looks like it will be street legal with full power here in Germany 👌🏼

[@wizz4131]

Can you pop wheelies

[@hodrot]

Jen bych ten stojan umístil na střed motorky kde je motor, jako to mají motorky, tohle řešení jako na kole není dobré, trčí tam ta tyčka tak nepěkně...a pak vedení brzdové hadice, inspirujte se u KTM EXC 300. Tam na tím přemýšlejí roky aby vše fungovali i nejnáročnějších podmínkách. Když už konečně někdo vyrábí elektro bike co má výkon a né jak ty přichcíplé Surrony co v základu moc nejedou, tak ať je to dotažené.

[@roywilson5481]

what voltage does it charge on

[@lungimama8557]

😢 i need one .. I'm from Bangladesh.

[@piszczyk]

The problem is: is it street legal? As far I know in Poland it isn't. What a pitty. If it were, I would buy one to ride to my job etc...

[@ehowell352]

Awesome video. Can I please just buy the frame and the motor. Please, and a PayPal link?

[@ladiandmargaret]

Sure thing! Email me at [e-mail] and I can send you payment link and get your shipping address!

[@muffins3922]

Could you please tell us how much the bike weighs?

[@brandonrobert3132]

Where can you buy it all from and the total cost

[@SaycOplayZz]

How much do you invest in this...?

[@tomaskujinek]

Wait, don't you need to register such e-bikes in Czech republics to have a license plate? I would love to build one!

[@nepletkai]

I”m curious what circuit breaker was used in front of the Nucular 24f? Specs?

[@missirina6912]

Wow, it is so SUPER !!! I wonder how is it to ride one? The brakes are good??; I WANT ONE for myself !!! How much is it; although I have to ride it on the Autoway/motorban - well, is it OK ???

[@Gabi-he6rw]

Hei guys, I have a raptor style frame with a 850lbs/in suspension(spring is about 80mm and bolt to bolt is 160mm). It almost bottoms down when I sit on it. I can fit a 95mm spring on it, do you have an idea about which lbs should it be? Please give me an advice/estimation.

[@tv197cu4]

what should ik bout the kit?

[@pianojazz4975]

How much does the frame weigh alone without anything connected without the swin arm?

[@Beibarys]

wow, you've used electric wheel as a motor, haven't you? I bought electrical wheel, but I didn't like moment of motor. I thought about using it as ab motor, but couldn't imagine how, now I can see, 😅 but my wheel diameter is bigger, so maybe it's not applicable for me

[@Cyber-Biker]

Good example at the start, I said to my freind that I'm gonna make it and he has NO faith in me.

[@zanariahabdulmobin6905]

How much days that you've been spent to make this e-bike

[@chris-w7d4y]

Dude the sharpie on the cut metal did absolutely nothing. Will probably already be rusted by the time I made this comment

[@ladiandmargaret]

Not a sharpie, it’s a paint pen

[@dk_iran_1702]

I would like to know which material is used for side black colur pannel used in the chassis

[@cyb3rdecker]

Where did you get the mid engine frame?

[@DevineAdams]

I love your work man 👍❤️ and I want to know the price of the bike and then the price of the frame alone.❤

[@michael2026]

Does USA also mean you could get one sent to Canada?

[@pamelarw58]

Who is the guy who just built motorbike as have seen him in shop of course….not sure if he has been introduced? Also how can you ride a high speed motorbike on main roads registration wise as it isn’t a conventional electric bicycle? Great video! ❤️🎄🧑‍🎄🎅🇦🇺🍻

[@DividingLimits]

pavel, he's been introduced a couple of times

[@jessehavok4181]

2P battery? How long does that last?

[@h-prib9304]

Is the frame made from stainless steel? Do you have the frame diagram?

[@jstagzsr]

what frame is that? ive seen them before but ive never found them for sale anywhere online. my massively powerful diy e-moto is built on a bomber frame and i sont like it. its a cheap frame meant for mid-upper level bikes and low end motos. that swingarm isnt made for huge power. i want to upgrade and its a bitch finding a new frame that i like

[@TimATX]

I'd pick up an old dirt bike and gut it to the frame and start there.

[@jstagzsr]

@@TimATX already did. Everything is bought already and the motor mount is fabricated. Just need to find the time to put it all together. 2005 crf450r roller Shinko supermoto tires Qs180 90h 3shul CL1000 (30s, 700 battery amps peak. 1k phase amps) 20s16p molicel P42A (67AH, 720A) 300A continuous 600A peak Xiao xiang BMS All new everything down to the bars, seals, bolts, plastics, etc. Gonna be a freaking monster.

[@thestreamreader]

What is total cost to build yourself?

[@jardamaly913]

how much did it all cost?

[@CRAZYTOON01]

Total price

[@SakshiPotdar-uu8xy]

Bro please give link of chassis design

[@a-aron2276]

Nice bikes. How do the batteries hold up? We talking about 20,000km+ with >80% remaining original capacity? I ask cause that's all I seem to be managing with my own builds but they're ncr and ICR chemistries. Just wondering how the lipos stand up.

[@144AMP]

Is it legal to ride by regular roads in Europe?