DIY Flat-Pack 6ft Bar For Events. || Amir Creator

This is a knockdown DJ Façade, able to be packed flat for transport and storage. Base is made of 3/4 in plywood and the top are 2 by 8 southern yellow pine. Looks great with the dark walnut wood stain, and the white paint.
This video was shot in early spring
Support this channel on Patreon!
/ amircreator
Follow me on Instagram:
/ a.mere.creator
Wood Glue: amzn.to/36Nh3Pi
Red clamp: amzn.to/2KWUDQ8
Pipe clamp: amzn.to/3aXX9A7
Dark Walnut wood stain: amzn.to/35p8mIU
Orange Dead Blow Hammer: amzn.to/3lLXTh6
Piano Hinge: amzn.to/2VJubPm
Drill and driver: amzn.to/2VfxyNr
Drill bits: amzn.to/2SvXy6F
Circular saw: amzn.to/39RkwLf
Random orbit sander: amzn.to/3fhd1Rt
Compact Router: amzn.to/3eDmnpT
Chamfer Router Bit: amzn.to/2XKsMsi
Angle Grinder: amzn.to/3hbqU3V
Step Drill Bit Set: amzn.to/2XL8EWT
White Paint: amzn.to/2IfL80y
Music
Artist: Nathan Perdomo
Instagram: / nathanperdomo
KZbin: / probablyforsure
Disclaimer: Some of these links lead to products and tools used in the video. If you click, or buy something there, I get a small commission, but it doesn't change the price for you. If you would like to support me, have a look.
Disclaimer: This video is for demonstration purposes only. I am not responsible for any injuries caused from attempting the actions in this video. This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results.

[@michaelcherry8952]

I really admire your creativity. It is usually easier to make something needlessly complex and then have to figure out how to simplify it to make it work. You have the ability to clearly see the most straightforward path and follow it. The result is elegant simplicity. I'm always happy to see an upload from you because I know it will be creative, beautiful and loaded with random distractions!

[@A.Mere.Creator]

Thank you, I appreciate the complement!

[@sudhansenthil1340]

The only youtube channel all my family adore...

[@jroscamps]

I liked the word that was written on the hearing protectors. "Silencio" means silence in Spanish. Very accurate. Your videos, as always, are great

[@redboot3911]

LOVE to see that it was actually used! Great video, Amir

[@GodAlwaysWins]

This is so relaxing to watch. I love it.

[@sinashariatirad]

Ahhhh, just another dose of amir creator therapy 👌👌👌

[@richardpfadenhauer]

Looks really good! Your Videos are so calm, perfect for sunday evenings :) Please keep continuing your work.

[@spupidtwins6017]

Another relaxing video

[@IAmBrooklyn81]

Beautifully done👍🏻

[@alikia2060]

Underrated! Keep up the good work Amir

[@FatGooseArts]

Your videos are so good. So simple and elegant. I love the music choice, the angles of the shots, how you manage to fit everything you are doing into the video. I really really like your content! (edit) Also, you make some seriously legit amazing stuff!!!!

[@AntonioSantos-eh3zo]

Pedazo de creacion Crack!!👌

[@thomashall2960]

What are the actual dimensions if you don't mind me asking

[@zamilhasan4299]

thousand-dollar problem solved in 20$. Great video.

[@kevinjohnson007]

The “glue drink” almost took me out!! 😂😂😂 Nice build my friend!! 😊

[@thomasafrica9724]

I wouldn't be surprised if the next vid you posted was "BUILDING A HOUSE!"

[@mr.nobody896]

That can FOLD

[@NoMorePatience33]

The lean and snap got you the sub lmao 🤣

[@xanthem8716]

I feel like an expert after watching his vid😌

[@Oddlyoko2K]

That bee was just screwing with you

[@06alwilliams]

I see what u did there 😜

[@rachelstauter]

Do you have the dimensions posted anywhere? Great build!

[@marcelo2745]

So this is where Eric Andre gets his desks

[@djdannybhtx]

Amazing! Do you have measurements and what the backside looks like? :)

[@katrinagarcia1003]

I’ve been looking for a DIY folding “bar” just like this. Do you sell the plans to this build?

[@dopala0557]

Keren banget,.. aamiin.. semoga berkah.. aamiin....

[@sempervelox]

I’m going to watch this when I go to sleep,

[@jaybig360]

Do you have plans I can buy to make this ? Great video

[@ShreekantDeodhar]

Love your videos! Any restoration projects on the anvil? :)

[@A.Mere.Creator]

Yes! I have a few tool boxes needing restoration

[@LEOX3]

En el segundo 20 ya le di a like. Cuandoe pude empezar a mover. Gracias

[@sicoDelia]

cool, how do u make it impermeable for a bar, thanks

[@jasonsilva4219]

Awesome! Caterers would love a bar like that. What paint and finish did you use? Is that a semi gloss paint with a satin varnish on top?

[@A.Mere.Creator]

It was gloss furniture paint, there is a link to both finishes in the description

[@djbrothareese]

Do you place the dj equipment on it or behind it? Are you able to fit two turntables battle style, mixer and laptop?

[@Lilfabo124]

Great work bud I just subscribed 1 question how the top works I see u had some bolts but did not get what u did

[@benjammin5508]

Totally far out cheers

[@JewishZac]

Did you consider attaching parallel lengths of wood to the top piece to wedge it into the folding piece? Too bulky?

[@A.Mere.Creator]

Was going for simplicity, this way worked well enough

[@ArashFahim]

You wouldn't finish it without the Carpenter Bee.

[@MezcalBuzz]

This is fantastic! Thanks for sharing. What's the average cost in material? I am considering buying a premade mobile bar, but like this approach much beter.

[@bdmayhem3391]

It looks like he needed more than one full sheet of plywood for the front and sides. 2 sheets: $150. I think he got the angled ends of top from the offcuts, so it only took 2 pieces of 2x8. Plus the bits to cover the corners could be a 2x4 ripped in half(ish). Dimensional lumber: $25. The cost of the moulding really depends on the style and length. A very rough guess is 30 feet in total, with prices ranging from 0.5 to 4 per foot. Let's estimate $40 for moulding. There are the piano hinges and brackets to consider. Hardware: $25. Finally, there's stain and paint. It doesn't take much, but they charge a lot for small quantities. We'll call it $35. That totals $275, so budget $300, assuming you have the tools already. At least a circular saw, drill, and sander. Table saw and miter saw are nice to have, but not absolutely necessary. I wouldn't expect that you could get this done by a professional for less than $6-800.

[@MezcalBuzz]

@@bdmayhem3391 thanks! I’m finishing my mini bar soon - less than $200… I hope it doesn’t look like less than $200! 😂

[@riddlez3177]

im going to slide a tv in the front of mine =)

[@jake12quintero]

Is there a material list for this? And which router bit did you use?

[@DJHerm]

I was planning on building something similar (transportable DJ facade) after a friend posted one that was rented for his wedding gig. I stumbled on your KZbin video while searching instructional videos. This is almost exactly what I had in mind! (I don't need the top, this will just hide/block a 4' table.) One question... The pieces at the end (I assume they're 1x1"?), are they flush with the bottom edge of the front and side panels? Or do the panels sit above the ground? Kinda hard to tell from this video. (The grass hides it on the IG pic too.) Thanks in advance and thanks for this video!

[@bdmayhem3391]

Those corners are 2x2s, which actually measure 1.5"x1.5". You can see the bottom better at 5:10

[@DJHerm]

@@bdmayhem3391 Thanks!

[@PaulJones-jw1nj]

Any instructions on this?

[@zugelchavez8242]

Hi can could you give a list of wood and materials used?

[@ArashFahim]

How come you have blossoms in Austin this time of year? Is the video old?

[@A.Mere.Creator]

Yes this was filmed in early spring!

[@randallmarshall2454]

What are your measurements for this build?

[@tamikareed-denson3358]

Do you have measurements?

[@MrDJBoombastic08]

Hi bud where are you based please? You fancy making a DJ booth furniture fir me please? Detail is just 😍

[@A.Mere.Creator]

Austin TX. Dm me on Instagram

[@dominicwilson725]

what are the dimensions bro

[@jalalelfarkh6520]

Name of the song please 😊

[@vaigreen5520]

What's the dimensions?

[@ansarisalman432]

Are you working alone at your workshop ?