DIY Fluted Coffee Table | $20 Thrift Store 80's Furniture

[@heidicook2739]

Only thing I’d change is that top edge. It looks unfinished. Everything else is great. ❤️

[@melindasmith3713]

Maybe wood glue

[@susanwierzba3244]

Agreed. Maybe some of that bendable putty stuff.

[@conniesisco6468]

That edge would drive me crazy.

[@monnikkk]

Maybe remove the gold ring and sand the sides, so the top edge is on top.

[@bam2431]

Bothered me so much

[@357QueenBee]

Like most people mentioned , that top edge is a deal breaker for me. It should have been attached under the top edge of the table. The idea is great but the way it’s attached really stands out.

[@MaureenTheTemp]

Only thing I would have done differently is start the pole wrap under the top lip for a more finished look. But the stain is just lovely and it certainly has the more modern fluted vibe you were going for!!

[@karenbobrowski1285]

Add trim to the top edge, would look so much nicer and finished. I wouldn’t try to sell it until that happened.

[@juliemarkham4332]

Curious to know why you didn't start under the top lip. Now, there is an edge discrepancy. Maybe if it had been sanded at an angle, it wouldn't be so noticeable. I have the same idea for my coffee table and wanted to see how someone else would do it. Thanks for sharing! 😊

[@theresaelmore5179]

Love it ~ would like a closing trim at the top edge where the table and the side boarding meets to finish it off 😊 $1000

[@debgersh5555]

If you decide to sell it, you may wanna do something with the edge, I love what you did and would’ve preferred a finished edge, perhaps a touch larger than the base

[@YT-GuestAccount]

The refreshed wood is so lovely and it's a nice idea; a refined top edge and opening panel would be a great plus for selling.

[@blessedabundance6266]

I Applaud stepping outside the box here, it's Very inspiring and definitely gets the brain juices flowing 👏 Thank you Christina for always bringing something new. Inspire, challenge and encourage thats what you do for me. Ty ❤

[@salvagedbykscott]

Love this idea so much!

[@kklunker]

KEEP IT. IT’S FABULOUS!

[@ClarkJ2265]

I have a very similar table but with the glass inserts in top. Have wanted to tone down the color and this is so inspiring. Wondering why you didn’t leave an opening on one side to access the interior for storage. Maybe a hidden door/panel for access?

[@susanw8471]

I was wondering why she didn't do that as well. It would be a great place to store serving trays (sliding them all the way to the back) or magazines magazines and other trifles when company is coming.

[@bettinabarry8423]

Turned out fantastic and I am so glad you were creative with the stain and didn't "paint wash" 😀

[@ChristinaMuscari]

Thanks so much! 😊

[@barkinatthemoon]

Great idea. Pole wrap is an versatile material to work with. I would like to see a finished edge at the top. What about feet or a low wide pedestal? These 80 s table were so big and hulking looking so raising it up somehow may help. I probably wouldn't have looked twice at this outdated table and certainly wouldnt have a vision for it.

[@dianaemerson9903]

Maybe use round reed spline used to repair cane or rattan furniture on the gap?

[@MS-qd6bm]

A lot of work goes into this but it is so worth, beautiful, luv it.❤

[@nannettenannettek9545]

In addition to the raw edge as mentioned numerous times before, I didn't like that there was nothing supporting the pole wrap on the sides. I wouldn't like to own something hollow. It could be damaged too easily.

[@samanthatucker7796]

I wish she provided an access point for storage, I always need storage

[@PAOLINAG]

It's pretty but I'd definitely put some kind of strip to complete the transition gap.

[@cookingbeastfanatic]

I love it, it's beautiful ❤️

[@ChristinaMuscari]

Thank you! 😊

[@Dahliaismypassion]

I love how it turned out but I would do something about the edge perhaps?

[@michelegurley8058]

Love the stain color it looks great! I agree with others the edge is unfinished looking. I liked the gold from the original and I would have tried to keep it in the design. I love everything you do and always learn from you. TY.

[@beckysimeone4882]

When I glue something like the wrap you used I lay a wood strip over the edge and then clamp the area. It gives me a more uniform seal and I don't need as many clamps.

[@ChristinaMuscari]

Great suggestion!

[@LemonstoLemonadeFurniture]

This one is so cool!! Love the 80s babies! :)

[@bellaszucs-zagoni9014]

I am an 80s baby, too, and I love this makeover! :)

[@phyllisforbes1106]

That is beyond gorgeous!!!!!!!!!

[@cookingbeastfanatic]

I remember that table my sister had one of those 😮❤

[@jamesbailey7785]

Good quick change with the wrap. More difficult but more uniform end result if wrap was in full length. Need a bit more out of the box thinking for wrap top edging:)))

[@LilyBecca]

I wonder if you could use metal or something bemdable to create a trim piece at the top of the pole wrap. Maybe even wood putty.

[@janzitterkopf1630]

And you did it again! Just beautiful!!❤

[@ChristinaMuscari]

Thank you so much!!

[@JMBZell]

Nicely done!

[@katalintorok2538]

Christina, can you make some other suggestion for the top edge? I agree with all below about looking unfinished. Would you be able to put the fluting under the lip of the top? Otherwise, looks great!

[@JanetCurtis-j8i]

Looks like a coffee table we had! I don’t remember it having a bottom shelf! Any way it is long gone!😊

[@ChristinaMuscari]

It's practically an antique! haha 😂

[@anng2113]

Beautiful job, if only you had some kind of itrim to cover the gaps between the table top and the pole wrap. I love to watch you work!

[@ChristinaMuscari]

Thanks for the tips!

[@monicalundy4400]

What would it have looked like if the bottom would have gone under the brass? I think it was a great transformation, but the raw edge of the bottom looks a little unfinished for me.

[@ejmakesus6]

Looks amazing 🤍 I found 2 side tables just like this coffee table and I loved them the moment I laid my eyes on them , I decided to paint them black . ☺️ I have them shown in my home, sweet home video series of my kitchen, dining and living room Reveal.

[@cariefrost2930]

Living in Franklin Tennessee can i assume you have seen the Dave Ramsey show live????😊😊

[@ChristinaMuscari]

I have not, but I've been to their office and was on the Rachel Cruze Podcast.

[@1CelloOne]

Why do you sometimes use a SurfPrep orbital sander vs the Ryobi orbital sander? is there a difference? I love your videos😀 Thank you!

[@ChristinaMuscari]

They both get the job done great, but when I need a heavy duty sander I pull out my SurfPrep or my Festool. Ryobi orbital sander is what I exclusively for a long time- its a great sander!

[@1CelloOne]

@@ChristinaMuscari thanks for explaining!

[@lynnelewis4487]

It's beautiful but I'm OCD and I think I would be annoyed that there is a bit of a gap at the top with your wood you wrapped around and it sticking to the table. I think I would have to put a flexible would trim around the top to finish it off. Great job!! I have never seen this wood you used.

[@francestalksalot]

Friend, please consider that using the label "OCD" isn't accurate and stigmatizing. You're not OCD, you're particular 😊

[@tarahazelrigg6467]

I love it! You did a great job… Try some veneer edge banding at the top to cover that edge. As talented as you are, I think you could get it to work and then you could sell it for big $$$! 😊

[@ChristinaMuscari]

I just bought some trim the other day that I might add onto this one.

[@muscarim]

Love it!

[@mywifetheartist]

Great job and wonderful information ❤❤❤❤

[@ericasimonson8737]

That's cool, but I think I would have left one side open (maybe the side that would face a couch, e.g.) so it was available for storage.

[@rhondabliss4620]

Fab job. How much would you ask for this makeover?

[@medshell4vr]

Looks great 👍

[@ChristinaMuscari]

Thanks 👍

[@diysbydar]

Great tips, and awesome job. I have noticed the thrift shops around my area are going up in price. I live in a rural area, declined incomes, so I would be insulting you if I told you what to sell it at here.

[@brenmanock]

Thanks for the inspo

[@loismaddux4800]

Beautiful!❤

[@ThrifterPicker]

I thought you didn’t sell your pieces

[@tanjacouch3340]

I was going to ask how you calked or did your edges ? Overall it looks good for what you were going for. Oak is just not my wood of choice ever. I have bet liked the look of it not then or now lol but the stain is beautiful. ❤

[@arizonashopper5095]

I was helping a friend dispose of his son's 1980s furniture, after his son passed away. I listed the items on Marketplace, and was going to give them away, but put a small price on them, just so people would show up (like $10 for a table & chairs, and $5 for a side table that looks just like the coffee table in this video). I was SHOCKED at how many people (young people, no less!) who REALLY wanted 80s pieces. I was inundated with requests. So before you change the look of something, you might want to see if someone wants it in it's original 80s glory. :)

[@pattio.656]

So Impressive‼️ I Love how adventurous you are! How much do you figure you have invested in this piece?

[@carrietale]

I don't personally like the top edge, BUT it does match the second, rectangular inspiration picture. I'm not very familiar with Scandinavian style furniture but it seems to have that vibe. Putting the pole wrap under the top lip would probably have compromised the shape (and maybe not hidden that awful brass/gold trim!). My parents had a coffee table a lot like the original when i was growing up and it looked so heavy and dated, so it was nice to see how light and clean this turned out

[@ChristineWear-vy6ue]

Cannot believe you did that wearing white!

[@nathanmyles3785]

Damn, that was my first table in my first apartment in 96

[@elisabethsingletary2998]

Wow!

[@patriciabarea7432]

Beautiful❤

[@montsef7912]

Impresionante, precioso

[@susanmeanslily]

I like this…the beaded wrap is cool. I don’t like how it looks unfinished at the top with gaps. I think if you’d put the wrap underneath the trim, it would have looked a lot better. Either that or fill in with a bead of stainable caulk or wood putty. Interesting nonetheless.

[@amysaunders4589]

Gorgeous 👍🙋🏽‍♀

[@ChristinaMuscari]

Thank you! 😊

[@rgvtexas8391]

The first time someone puts their feet on it and scrapes the edge, off comes all that hard work. I'm with the rest, it looks unfinished.

[@stephanietaylor8003]

Top edge spoils it imo. Covering up the original brass trim and beautiful legs 😢. But one day someone will get a nice surprise when they remove the pole wrap. Doubt it will sell for much as is.

[@zamora2098]

e I am watching this,I am screaming,Please,put a trim over the wrap....everything looks great except the unfinished top or the wrap.

[@nathanmyles3785]

Probably would've been better to just sand it down and paint wash it to a newer school color with the grain still showing. Either that or fill in the gap between the flutes and the top with putty sand it flush and smooth, draw in the wood lines in then paint wash it. Lot more work but it would've completed the look. Or use the gap and incorporate some led lights in it.

[@peterverling1537]

It's not pole rap, it's called tambor and you use contact cement to apply it!!!

[@minimaker5600]

I don't think this is a real tambour door material, not if you can slice through the backing with a utility knife. These days manufacturers can make some really nice look-alike versions of more expensive materials. A pole wrap sounds like it would work for that very nicely.

[@nataciamarin624]

👏🏽🔥🔥🔥🔥

[@sophiachristo7546]

I think it needs legs... cylinder shaped legs. It looks weird with all that bulk around it without any opening... it needs to get lifted from the floor. I love the color but I don't like the edge of the pole wrap against the top surface... maybe using a trim will make complete and professional looking. Thanks so much for sharing

[@judithtitterington9862]

I liked the metal strip around the edge, sad you covered it up. Otherwise beautiful.

[@nataliabarber1779]

Definitely a DIY the gaps at the top are not great you do so much better

[@annettabaker2862]

I’m really surprised with this flip. It looks unfinished. Your work is normally really good but I would have to pass on this. It needs a trim piece on the edge of the pole wrap. Don’t care for this piece as is.

[@hawaiibound.]

The ugly 80s thrift store find doesn't look any better. The gap between the top of the table and the fluted sides looks awful. 19:38

[@pgmom9634]

Looks like a yellow oak Needs an edge Good idea Looks yellow Could me the camera

[@LisaKessler-o1q]

You need a trim pieces to cover the raw edge on the top and the bottom. Normally I really like what you do but this... nope.

[@minimaker5600]

Sorry, but it looks waaaay too bulky, like it's trying to hide a small bed.

[@ccbb5675]

the top makes no sense with what you did.... and the edge between to top and the side looks unfinished...

[@dawn5227]

The top edge is bad, it's unfinished and looks obviously just something added as an after thought, without really thinking about how it fits. I really wouldn't be happy if I bought this piece. Don't like it.

[@cariefrost2930]

Sell it. Ask for $75. Nothing less

[@amybucher5439]

That wouldn’t cover the costs I don’t think.