DIY Folding Workbench: Step-by-Step Build Guide with Materials List!

Рет қаралды 79,853

Күн бұрын

Пікірлер: 62

@debraschultheis2515 8 ай бұрын

I made this with my husband and all went well until we rounded off the legs in the wrong spot (not where the two by fours meet) but the other direction. Had extra 2 x 4’s so fixed it and rest went very well. Thank you for such good plans. This is perfect for my single car garage when I want to build something. Thanks again! 😊

@IamjustsayingLOL 4 ай бұрын

This is so far the best practical instruction video for a fairly complicated project I’ve ever seen. Thank you ❤

@LanceT. Ай бұрын

Thanks for this. Built it on Saturday and it worked pretty well. I put my wheels in between the legs so that they didn't stick out from the wall.

@Wdiedericks 6 күн бұрын

Awesome, thank you for this video. This is just want I need. 👍

@MrFbcampos 7 ай бұрын

Excellent video and nice of you to include a materials list. Thank you very much.

@TopHomeowner 7 ай бұрын

You are welcome!

@larrypandoff 10 ай бұрын

Make your latch a little longer to hold the leg center board to the wall

@tapia44 Жыл бұрын

Thank you so much. Built mine using your instructions. Came out perfect.

@TopHomeowner Жыл бұрын

Awesome! That's great to hear 🙂

@websurfer351 3 ай бұрын

Great video. I’ll have to try building this. Thanks for the demonstration and plans.

@philipdavison4066sawdust 3 ай бұрын

It's brilliant thanks for the video nicely explained and easy to understand many thanks Keith

@chrisb9792 5 ай бұрын

Your video is really insightful man, I appreciate it being so thorough and informative. One critique is that it seems like it’ll wobble side to side without any cross bracing. I’m gonna give the build a go pretty soon, thank you once again.

@jasef6793 Жыл бұрын

Awesome vid mate, thanks for taking the time and putting in the effort. Love the table.

@TopHomeowner Жыл бұрын

No problem 👍

@enieves6411 Жыл бұрын

This is awesome...well articulated. Just what I was looking for. Thank you!

@TopHomeowner Жыл бұрын

You're very welcome!

@robbielofland105 9 ай бұрын

Awesome video!! I’m at the part on my own build but struggling with the rounded edges of the legs can’t seem to get them perfect

@ryderoreilly9807 17 күн бұрын

Awesome work ❤

@landrybrown3504 Жыл бұрын

Made one today just like this one, thank you for the informative video

@TopHomeowner Жыл бұрын

You're welcome!

@fred2552000 Жыл бұрын

Nice table! If I could ever clear mine off, maybe I could use one too!

@TopHomeowner Жыл бұрын

Yeah, that's a whole other challenge!

@allenknafo2840 Жыл бұрын

Thanks for the video. Question. What is the finish height of the workbench? Thx

@bradleyrounds9148 11 ай бұрын

0.75+ 34.50 + 1.0= 36.25 Top. Leg. Wheel Or pretty close

@janinewinn5596 11 ай бұрын

Perfect I can't wait to build my own. Thank you for your

@TopHomeowner 11 ай бұрын

No problem 👍

@ryanmurray9102 Жыл бұрын

Thanks for posting. I used this vid to make my own.

@TopHomeowner Жыл бұрын

Awesome!

@lucadetomi9269 10 ай бұрын

Hi. How can you prevent the tablet to wobble without some diagonal Pieces?

@grenadierhaast 7 ай бұрын

Going to buy the materials and give this a shot! Thanks for the tutorial!

@RabbleInArms Жыл бұрын

I made a similar table with similar wheels. One issue I'm having is the wheels get caught under the legs when I'm lowering it. Have you encountered that? I'm thinking of adding a spring to keep them from going lower than the deployed state. Also, I made mine high enough to also serve as an outfeed for my table saw. But this makes it difficult to undo the top latch with the leg support in place. I'm brainstorming ideas to help with that. I thought about changing the long horizontal support to one that runs diagonally from the bottom leg stretcher to the middle support under the table. Another idea was to have some extended lever thingy to undo the latch...

@TopHomeowner Жыл бұрын

I haven't had that issue with my wheels. In fact they can't go any lower than where they are designed to be. The only thing I might change is attaching them about 1/8-1/4" higher because I don't need to raise the table as high as they will now. Changing the horizontal support from the leg stretcher to the middle support sounds like a good idea to me. An extended lever doesn't sound as... safe.

@markhoger1964 8 ай бұрын

Question. When drilling a hole for the legs to pivot you say to make a mark 1 5/8" from the top. It sure looks more than 1 5/8 inches in the video. Can you please confirm?

@mcalfee 6 ай бұрын

Very helpful. Thank you.

@Boots_in_Texas Жыл бұрын

Thank you, I appreciate all the tips along the way. Subscribed!

@TopHomeowner Жыл бұрын

Thanks for the sub!

@dougehrhard6307 6 ай бұрын

Where is the materials list. Great video

@lordfaramir11 8 ай бұрын

Do you have plans you can share or sell? I’ve seen some others that wobble when free-standing. Does your design wobble?

@guitarrecord101 Жыл бұрын

What's the stability like? I've seen another similar build that was really wobbly and had to be amended to use diagonal bracers.

@TopHomeowner Жыл бұрын

It's really stable. I might modify the lower removable brace and leave a few inches of material on each side past the leg (instead of making it flush) but honestly I've been happy with it

@debraschultheis2515 8 ай бұрын

Question on the lower leg support….notch 1 1/2” x 1 1/2”……how will that hold the legs from moving outward and ending up not straight?

@debraschultheis2515 8 ай бұрын

Ok…..decided to not use the middle support and put 6” 2x4’s on the outside of the upper legs to serve as a stop to keep the legs straight. We’ll see how this works.

@TopHomeowner 8 ай бұрын

The stop on the outside of the legs limits outward movement, but it could be better. The lower leg support prevents the legs from collapsing inward. You might want to make the lower leg 6-8 inches longer so that way the notch has support both ways.

@ChrisLorenz-j4y Жыл бұрын

Awesome video! What type of wood are you using for the 2x4’s?!?! Regular framing 2x4’s?

@TopHomeowner Жыл бұрын

Yep, just regular framing 2x4's!

@YTubeSDD Жыл бұрын

Thanks for the video. Do you get any racking with your design? Is it wobbly at all?

@TopHomeowner Жыл бұрын

It'll move back and forth slightly from side to side, but not much. If anything the legs sometimes unfold a bit too far, so if I had made the removable leg support about 6-8" longer (and not have the notch at the very end), it would probably eliminate that completely.

@HarrySatchelWhatsThatSmell 8 ай бұрын

Nice project!

@TopHomeowner 8 ай бұрын

Thanks!

@eddysegura1381 Жыл бұрын

Why not secure the tabletop to the skirt from the top to avoid having to drill holes throughout the skirt and possibly going too far with the screws? Is it for aesthetic purposes?

@martinhayes9847 Жыл бұрын

From what I've seen, putting holes in the top can cause divets, bumps, and what not which can make the top not flat. Also, by using the skirt, you can swap out the top if it gets damaged

@mikewelch3903 11 ай бұрын

Screws through the top into the skirts would be a much better method. This is, after all, a work bench, not a kitchen table.

@stephenmoore2561 9 ай бұрын

I’ve seem other designs where they used pocket hole screws from the skirt into the top. Just have to install the pocket holes into the 2x’s b4 you assemble the skirt.

@georgeanderson4411 8 ай бұрын

You can't go too far with the screws if you use the length of screws he specifies in the materials list. Why would I want holes/screw heads in the surface of my work bench instead of a smooth top? I wouldn't.