DIY Golf R Euro LED Tail Light Mod

[@souks.1803]

Just did mine, took me 2 hours total. This video help a lot! I used large "tie wraps" instead of a wire snake and it worked perfectly. Cheers!

[@GolfRDad]

Awesome! One of my favorite mods. I bet yours look great!

[@mgtd626]

🎉

[@emptywrecks]

Thanks for this vid! I was able to finish the install in just under 4 hrs with minimal hiccups and headaches thanks to you guys.

[@GolfRDad]

Awesome! Glad it helped!

[@sari254]

keep it up buddy, really like the quality of your videos!

[@timothyforman9916]

Thank you very much for this video. It helped me tremendously, much more than the DAP video.

[@grumpyjuicetrucking]

Timothy Forman that dap video was trash. Not even worth uploading

[@Tig-Wan]

Hey great vids. If you are going for the stock European look I believe you can re code or something like that the LED headlights to make them brighter. US regulations don't allow our LED lights to be as bright.

[@ND-lg6wd]

11:49 I just done this on my mk5 gti, the rubber boot connecting to the body of the car has broken now I need to snip all the wires and for a new one so water don’t get into my car, nightmare

[@Bossdog306]

Where can I find the king coding sheet that BEC would supply? I just got a used set of tails with the BEC harness but no instructions…

[@justgiz]

why are the wires pre set to make you snake twice? seems like it'd be way easier to snake the wires in the same direction at the same time.

[@minibx6659]

I did this a few days ago, i did the same thing you did with the wiring in terms of zip ties, it was dejavú Seeing yours lol. I hated BEC's lack of info and the outdated colors as well and no mentioned of the black trigger wire on were to route it, I ended up just using common sense and as it turns out saw that you routed the black wire in the same manner, I already was familiar with the panels since I installed a rear dashcam but also the coding was a pain since I use VCDS and I already had my US lights coded to use the inner lights as brake light and signal so I had to reverse all of that and although I want to recode to use the inners as brake light again I'm afraid of not having enough contrast between the brake light and turn signals

[@GolfRDad]

We had to whip out a whole lot of common sense to make heads or tails of that BEC harness as well. Glad you got yours figured. What are your tails set to now? Brake lights on outer only?

[@minibx6659]

GolfRDad yeah, brake lights on the outers only, because of my previous coding my inners were really bright after install but I was able to fix that. It was my understanding that with the BEC harness it was not possible to have the inners as brake lights as well but I see that you have it like that good to know, I will attempts it after a few months if I get bored :-), also replacing that lower plastic cover it pretty scary because you thing that it will brake as you get those tips near the glass good thing that the plastic bends a bit :-) great video man thanks

[@mcderpen]

one LED is blown on the outer passenger side where the amber light comes on =/

[@wiicando]

Hello from Germany, is it possible to get the wire plan from you ?

[@arainla]

Great video!

[@timothyforman9916]

Very helpful amateur video! What were the names of the snakes that you bought?

[@JR14Channel]

Did the OBD11 also code in the rear fog light!!

[@Flushang]

Great video once again! If you don't mind me asking, what do you do for a living?

[@MsAllanjensen]

Nice vid. Im from Denmark, so LEDs are standard here. Just wanted to inform you that you can match the rear bumper cat eyes to euro R tinted red ones. Official VW for the Rs here in Europe. You seem to like details so just wanted to mention snd they match your rear LEDs They are some EUR 40,- Best regards. Allan

[@MrSima012]

Can i get link for instructions?

[@MrJnr786]

hi sir any chance you still have the guide / manual i would like to see them to create my own connectors for a Volkswagen sharan which I think is the same

[@fetchco]

In the before and after footage, is one of the red leds on the right outer light not on? (it looks like it should alternate between yellow and red while signaling like on the left side)

[@GolfRDad]

That is some Batman level detective skill. You're right, I just went down to the garage to confirm it. With the parking lights on the passenger side tail in that spot doesn't light red like the driver side. When the brake is pushed it works though. Just on that one LED. I'm honestly not sure if that is a coding or defect issue. Now I have to think about if I can live with it like that!

[@eric6650]

Defective. 🤣

[@chasaroo77]

From another Golf R dad, can you give more info on how/where you ordered the lights from. Link? Thanks

[@GolfRDad]

eBay! From a German VW parts seller.

[@eric6650]

Link for the snake, BEC harness?

[@pault477]

This is a great video.

[@OSUCowboyz]

Are the taillights tinted or is that the oem euro color? Some pics I see online are much more red and some are much darker... ( plan on buying some soon...)

[@Jvilleman400]

i coulda swore the euro tail lights used sequential turning signals, i guess thats another mod you'd have to add

[@josegomez-cm1cr]

como se llama el arnes ? tendras el link

[@pault477]

Do you have a link for where you bought these?

[@Leatherkid01]

Now u need a headlight switch with front and rear fog lights since u got the euro tail lights and coding.

[@GolfRDad]

On the to-do list. So little time! :D

[@guillaumethibault5041]

Hi do you have exact coding i meed to do with obd11 ?? I am new amd not sure for coading with obd11 i have same kit then you

[@PBRStreetGangster]

Nice video!

[@FbGo]

good job!

[@bderbder9510]

Can you share all coding pleas

[@ravescience2000]

awesome:)

[@RT-zg9qi]

Took me about 2 hours with the DAP Harness and Euro Tail Lights

[@pault477]

Good God - this is way beyond my skills.

[@scotchegg6422]

Your inner left tail light isn't seated correctly, not straight.

[@RT-zg9qi]

Why do people buy the BEC harness? DAP is way easier and has 1 touch coding APP

[@louisganem4238]

7 hours ??

[@GolfRDad]

Video slowed the process way down. Others have commented 2-4 hours.