DIY Heavy Duty Trolley

IN this video I'm making a heavy duty trolley. It will help in moving any materials around my workshop and during moving houses. This trolley is easy to make and will handle most heavy stuff you may have in your workshop or house to move around.
I have picked up the galvanised pipes from an online store www.themetalstore.co.uk
All my tools, woodworking accessories and video making kit is now in one place for you to check out. These are Amazon affiliate links. With a purchase through this link, you get an awesome tool and you will support my channel without spending a penny more.
Link to Amazon is just below! Thanks!
Tools I use and recommend:
www.amazon.co....
You can now support my channel via Patreon. If you feel my content adds value for you or its entertaining then help me continue to do so.
Any donations via Patreon are so much appreciated, you can find out more here: / casualdiy Thanks!
You can support my channel by dropping some change in the Casual DIY Tip Box. Thanks for your support!
www.paypal.me/...
You can find me on:
Instagram - / casualdiy
Twitter - / casualdiy
Facebook - / casualdiy
Etsy - www.etsy.com/u...
Email - [e-mail]
#casualdiy #woodworking #trolley

[@kiwiflare]

Looks great...only thing I'd do differently is moving the wheels a little further in from the edge so the bolt doesn't fail and pull out the corner

[@markduggan3451]

The UK is going to be even poorer without you in it. I wish you nothing but good fortune and health. Take care.

[@CasualDIY]

Hehe the UK will be just fine. Great Nation that I had the privilege to live in👍 Thanks 😁

[@gerrygold9273]

Thank you. This was very helpful. Easy and straight forward for anyone to make.

[@CasualDIY]

Thank you for watching

[@c123bthunderpig]

Excellent plan, strong, quick build, I'm off to our Big Box hardware and lumber to get the materials. Thanks

[@CasualDIY]

Thank you for watching 👍

[@sairunbibi7328]

One of the best solution

[@CasualDIY]

thanks

[@gizmogaraz2023]

tyle razy myślałem nad tym żeby jakiś wózek sobie zrobić i zawsze pilniejsze sprawy są, ale kiedyś nadejdzie ten dzień :)

[@CasualDIY]

Oby ten dzień nie był podyktowany przeprowadzka 🤣 ale powiem szczerze że oprócz przeprowadzki to się bardzo to ustrojstwo przyda. Materiały z samochodu na wózek i do warsztatu. Plecy szczęśliwe 🤣

[@rogersierra265]

This is exactly what i need to build for my pellet smoker. Got the Austin XL but even it being XL its still really short for me. I'm 6'5" with a bad back so the less bending I have to do, the better. This will be perfect to raise it up jusylt where I need it!

[@CasualDIY]

Thank you for watching the video 👍

[@jimwood73]

Safe travels mate

[@CasualDIY]

Thank you kindly 👍

[@cezrok5405]

Very good video simple i have lots of plywood i m going to make one !

[@CasualDIY]

It was very helpful I have to say

[@joaquinvaquero7198]

Good luck with the move. Few months ago I did mine from Spain to France, and that’s why I started with the DIY projects (and following your channel 😁) my tip, take calm is a long distance run.

[@CasualDIY]

Hehe oh there will be some distance

[@Qwerty1235945]

Great to see you again Tomasz. Safe travels fella. We’re gonna miss you, I promise you that.

[@CasualDIY]

Hehe I missed making videos. I hope to make at least few vlogs on the way, until I get a new workshop 👍😁

[@shfuss9397]

Do you use fixed casters in the back and swivels in the front. Also where did you get the pipe for the handle. Nice work!

[@CasualDIY]

That's correct, and I got my pipes from www.themetalstore.co.uk/

[@johndunlop5194]

Good luck withe the move. Keep the videos coming. 👍

[@CasualDIY]

I'll try my best 👍😁

[@johnconnerty7243]

It's great to see you again. Hope you and your family are well and hope it's not been to stressful sorting the move out? Picked up many tips from your videos and love your simple way of explaining things. All the best to you and your family for the Christmas period and really hope to see you in the future!

[@CasualDIY]

Thanks, yes I think the worst is behind us now - with regards the move. Now we need to find a house in Poland🤔

[@idlersdream826]

Good to see you back 😁. Hope all goes well with the move and that trolley will be very useful.

[@CasualDIY]

Thank you. Oh it was very useful 👍😁

[@charlesarnold4963]

Well done. Good luck with the move. I hope all turns out as you are hoping.

[@CasualDIY]

Thank you mate👍

[@briansworkshop01]

Great job and good luck Tomasz. AND REMEMBER STAY SAFE. 🍺🍺👍👍😷

[@CasualDIY]

Thank you kindly my friend 😁👍 stay safe

[@matthewalbum]

Good luck. Always enjoyed your videos

[@CasualDIY]

Thank you very much

[@JackCliffordWilliams]

Great video! Good luck with everything! 👍

[@CasualDIY]

Thank you kindly

[@alfrose9831]

Good to see you again mate! I hope everything goes well with your relocation. Happy trails mate!

[@CasualDIY]

Hehe thanks mate

[@Thesidingsworkshop]

Handy build mate glad to see your still around. Beard is coming in well mate 👌 👍 good luck with moving mate 👍 keep in touch

[@CasualDIY]

Hehe thanks mate, got nothing to trim it with all went in a lory to Poland lol

[@tooladdict7463]

It’s nice to have a catch-up and see what you’re up to Thomaz Good luck with the move hopefully they’ll be a workshop at the other end of it :-) take care Mate

[@CasualDIY]

Yes I hope so to👍

[@gaz740]

Nice quick and useful build Tomasz. Hope the move goes smoothly and to plan for you. Stay safe.

[@CasualDIY]

Thanks👍

[@sumosprojects]

Onya mate, hoping the move goes smoothly 🎥🔨👍

[@CasualDIY]

Yes let's just hope we will find a good home in Poland 🤔

[@Magnus_E]

Good job, Sir! Thanks! Will do sth similar, a bit smaller :D "Make dust not war" T-Shirt rules... hahah

[@CasualDIY]

Hehe thanks 😊

[@annacraft]

All the best for your move! I am also currently organizing mine and there is still a lot to do 🙋🏻‍♀️Anna

[@CasualDIY]

Thank you and good luck with your move👍

[@mrwarlock5070]

Hi Tomaz, I hope all is going well with the move etc :) Its good to see you uploading again though, even if you cant do maker videos until you've set up another workshop, make sure to check in and let us know how things are going :)

[@CasualDIY]

Will do. I'll make a quick vlog video for next week. I'll show you few projects I have done around the house years before my KZbin adventure 😁👍

[@mrwarlock5070]

@@CasualDIY nice one :) the more the better I say, i'd be up for some travel vlogs of Poland as your vids give me something to watch in between my own projects, which i'm stringing out a bit to give me something to do every day....lol

[@CasualDIY]

@@mrwarlock5070 Hehe I'll try to mix it up a bit until I get a workshop sorted

[@Pounamu78]

Great. That was exactly what I had in mind. Just wondering whether it would be better for the distribution of weight to put the wheels in about 20%? I'm building many of these for 1000 litre chemical drums. The wheels are rated for 300kg but 1,100kg is kind of close enough (I hope - maybe I build one and see before building 6).

[@CasualDIY]

Yes it would be better if the wheels were in bit more.

[@BlackCat_2]

Very nifty and thanks for sharing. :D Good luck with the move and hope it goes smoothly. - Heidi

[@CasualDIY]

Thank you kindly

[@mattkrol1346]

do you think two solid casters on the back and two swivel on the front would make it even better to control?

[@CasualDIY]

Hmm depends. For me it was better to have them all move. Getting in and out with a heavy load from tight places made the best choice

[@daviddolan6403]

Good Luck Tomasz, Could you mention where you purchased the castors please?

[@CasualDIY]

Thank you. Got them on EBay, here is the link. www.ebay.co.uk/itm/4x-HEAVY-DUTY-125mm-Rubber-Swivel-Braked-Castors-Casters-Incl-WHEEL-BEARING-/154064958552?_trksid=p2349624.m46890.l49292

[@SkYDeGeNeWratOr]

Tomazs, good to see you again. Was wondering many times from your last upload, how's things on your side. Keep it coming, Slovan (or Slav, nit sure) brother. 😉 Cheers from Slovenia. Hope everything will go smoothly for you and your family.

[@CasualDIY]

Thank you my friend 👍😁

[@mattkrol1346]

good job man!! is it easy to steer? i was thinking of building one with steerable front axle but maybe this would do?

[@CasualDIY]

The casters are very easy to manoeuvre, I used this cart to move all my stuff from the garage to the lory that was parked about 50m away. No issues at all in steering, it was a great helper.

[@leventeagas]

Best of luck back in poland!!! Keep the videos coming ;) greetings from hungary :)

[@CasualDIY]

Thank you kindly

[@paulcummins8081]

Great to see you 👍🏻

[@CasualDIY]

Thanks 👍

[@gaborpallosi7600]

We love you Man!❤ 😪...

[@CasualDIY]

Lol

[@leesaville3170]

Good to see you back mate, why when you move can't you carry on with the videos ?maybe not straight away .?

[@CasualDIY]

When I move it will be to a flat. So I went have a workshop until we buy a house. Unfortunately a house we wanted to buy got sold few weeks ago and there is nothing interesting currently on the market 🤔

[@johngatland]

Sorry to see you go but all the best ror the future

[@CasualDIY]

Thank you kindly

[@lemuelmarkmorata650]

Pahinge naman jan kahit ano

[@TopoPilot]

Maybe put the screw side down? Purely for esthetic reasons. Cool project.

[@CasualDIY]

Thanks, yes could do that no problem. Thank you for watching

[@funkydrumshack]

Hi, what diameter of galvanised pipe did you use for the handle? Thanks in advance 😀

[@CasualDIY]

Hi sorry for the late reply somehow I have missed your comment. The diameter is 26mm. Hope it still helps.

[@funkydrumshack]

@@CasualDIY Thank you 😀

[@charlesnenei3034]

🤣🤣🤣 so simple but useful

[@CasualDIY]

👍

[@DeafMaker]

What type plugs and voltage do they use in Poland? Will it be a problem for your tools?

[@mysterMM]

Voltage is same but wall plugs are different. Same as in rest of the Europe. You need only rewiring new plugs and everything will work as should.

[@CasualDIY]

Exactly that 👍

[@philipwatts9033]

Where are the wheels from? Thank you

[@CasualDIY]

As far as I remember I picked them up on Amazon

[@philipwatts9033]

@@CasualDIY thank you

[@GabiFodorrasRO]

Big like!👍👍👍👍👍✅💪Felicitări! Great video 👍

[@CasualDIY]

Thank you my friend 👍

[@sheilamartin-l1f]

Iam looking to make a sewing machine trolley waterproof with wheels