DIY Helping hand for soldering and elec.(SIMPLE & CHEAP)

A helping hand is one of the most important tools for soldering without it soldering becomes a very tedious task to do so in this video you can see how to make your own helping hand.
--------------------------------------------------------------------------------------------------------
DO SUBSCRIBE TO MY CHANNEL FOR MORE VIDEOS
& THANKS FOR WATCHING AND DON`T FORGET TO COMMENT SHARE & LIKE
---------------------------------------------------------------------------------------------------------
Music: Ahrix - Nova
Spotify: open.spotify.com/artist/0kXCd...
Facebook: bit.ly/1wFWvyM
KZbin Channel: bit.ly/2mUBTD2
KZbin Video: bit.ly/1eXqiOi
SoundCloud: bit.ly/1m1ye0b

[@hermanhermitz9101]

I like it that even though you go very cheap, you still try to make it nice by laminating the base.

[@robertcartier5088]

A very nice idea! So simple to make and so very useful! I would have used the same color clips for aesthetics, but that's just a very minor thing. If I had to make it even easier, I would use a single, longer wire, with a clip at each end, and I would loop it in a reversed V shape around the screw, under the washer... In that way, I could skip some of the soldering, and additionally, I could swap longer or shorter wires with different clip types or larger wire gauge (for strength) as easily as turning the screw. A knob on the screw head would make that even easier!

[@just4electronics101]

thanks for the idea actually similar idea came in my mind after completing it !!

[@felipesantiago1194]

Instablaster...

[@misadventuresintechnology8940]

Nice to see someone using this type of rosin flux, it is the best in my opinion.

[@rameshwarprasadmeena2400]

You have made difficult work very easy and convenient. Looks good,Thanks

[@mabsalom1]

Nice! I have one of those cheap ones with the magnifying glass and often it is more trouble to adjust the clips than it is worth. This looks like it's much more useful.

[@aadityakarki6839]

Hi bro

[@stepbackjack4194]

I ordered the helping hands rig but I can't wait for it. I need to solder something now, so I building this thing now. Thanks for the idea and the video.

[@sarladevi7248]

Ye bahut hi achha ha bro

[@titanix2717]

Can u name the wire which u used.. please

[@mahmoudsalah7628]

Can I ask what is the name of this cover u used or a link for a similar one ?

[@Atetus94]

Super simple and nice :)

[@cassanovapiningit7877]

this is very helpful video

[@sauritinfo2248]

Most simple and helping

[@just4electronics101]

Thanks I am glad that you find it useful

[@beatricemakokha3809]

Very innovative ,👍👍

[@IdeabyPritam]

It is a good idea👍👍

[@riaanroberts1318]

hi this so far the greatsest helping hand video I seen and u dont have so many views but I will share the video

[@just4electronics101]

Riaan Roberts thank you so much

[@CreativeExprimentSudip]

good

[@tinmt3131]

Can you inform about, what is this wire type material used to hold the clamp? Please tell

[@mohan4949]

nice job thank you

[@TechnocratDIYEducation]

final look like a professional helping hand

[@just4electronics101]

Technocrat Thanks bhai

[@endlesslove3912]

From ingenious 101

[@dynolitegaming4410]

thank you very much

[@REOYT89]

Superb stand

[@SumitKumar-ym5it]

What is the tape name you should use in your video and give it's link to buy it. Please🙏🙏💓

[@himanshu0591007]

Really nice 👌👍

[@just4electronics101]

Himanshu Bhasker thanks

[@Levy_Wilson]

The only problem I can see in this is that the hands can create a circuit since they're connected completely with metal. Still a novice, though, so I don't know if that's truly a concern when soldering electronics. It might have been better to just screw them individually into opposite corners, or screw all four into each corner. It's a nice idea that can be simplified further.

[@lewiz2011]

it only matters when you are soldering battery terminals or the like....in most other scenarios its all gravy.

[@darandaleramesh5519]

@@brendencohrs9810 good idea

[@nyarihiburan5365]

simple but useful , like this

[@just4electronics101]

thanks for liking it!!

[@JasonSmith-qx3zh]

What gauge wire was used? Pretty cool a must do for me thanks!!!!!

[@maskedredstonerproz]

the thicker and harder to bend the wire is , the better it is for this

[@alexismavarez5052]

Lo simple es bello.

[@tohtorizorro]

What are the wires used as arms in the video?

[@abhijitjoshiortho]

Which gauge wires to be used?

[@owaisparkar]

Superb idea

[@just4electronics101]

thanks bro

[@owaisparkar]

welcome man

[@kowshikhero8806]

Your video is sooo good. And can you say me which editor is you used to edit your videos??

[@memesin777]

Thank you bro thank you so much

[@richiesun9676]

What's in that tin he keeps dipping into?

[@CREATIVEINFOCREATIVEINFO]

Thanks

[@sidd7775]

Is it copper wire?and what's the gage no of this copper wire?🙏🙏

[@beattobeat348]

hey what is that brown colour thing !!!!!!

[@Surenderkumar-mc2ri]

Hello l am aman ye chimti kaha milegi jarur bataye pleas

[@vandrangivenkatesh2836]

good good nice video I like it going to see more of your videos and subscribed

[@just4electronics101]

Vandrangi Venkatesh thanks

[@abdulwahab-lp4vs]

which wire you used for it

[@just4electronics101]

aluminum wire and its cross section area is around 2 mm

[@Tyrus429]

use old hangers which where used for hanging cloths.

[@just4electronics101]

ill try Thanks

[@shailmisra1874]

What is the name of the bolt you used

[@chinnubugutha1237]

Plz tell me type of wire used or its name or its diameter

[@momenurrashidmukul1394]

Jossssssss😂😂

[@seemalamba9707]

keep on going

[@just4electronics101]

Seema Lamba definitely thanks for a push

[@jameshm661]

nice

[@just4electronics101]

thanks

[@aathifshaan6663]

What is the name that clip please reply please bro

[@EXTROVERTTECHTIME]

What wire you have use ,asome!

[@Comrade_YG]

He used a thicc copper wire

[@Comrade_YG]

From an electrical wire

[@_jesniha_]

This is very helpful thing But this video is very fast

[@bhartisoni6630]

i like this

[@just4electronics101]

Bharti Soni thanks for appreciation

[@talhach7512]

GUD

[@just4electronics101]

thanks

[@jonron3805]

Whats the wire you used? Where do we get one?

[@just4electronics101]

aluminum wire and its cross section area is around 2 mm

[@FaizanBhutta]

Appreciated 💗

[@just4electronics101]

Thanks

[@techgames6602]

Where to get these cliffs?

[@Comrade_YG]

From electronic stores or from online stores like : amazon or online stores that are available in your country

[@chocolatecharlie3329]

what type of metal is the wires, galvanized steel??

[@just4electronics101]

This is an aluminium wire

[@chocolatecharlie3329]

can aluminum hold a perfboard in the air

[@just4electronics101]

yep for sure I am using it since I uploaded this video It works very well

[@j-pongkongkraphan7739]

Goodddd

[@just4electronics101]

Thanks

[@ragavanr7936]

awesome video nice bro

[@just4electronics101]

Thanks, bro And do subscribe to my channel for more upcoming videos.

[@preetsingh1467]

brother copper wire kaha se milegi

[@just4electronics101]

In India you can find these type of wires from motor winding shop or people who repair mixer grinder cooler motor etc

[@farrasarts393]

what name of clip?

[@timewasting8762]

Aligator clips

[@rogerwalter2500]

Jugad at its best

[@mandatrashpanda896]

Hey there @Just4 Electronics! I am going to feature your video, thumbnail image and the link to your video, in an upcoming video on my channel for how to solder wires on dumpster finds. I mentioned that you can make your own helping hands which is why I am including your video as well as another that popped up on a google search. I hope this is ok with you as it will drive views (and hopefully some subs!) to your channel! 😊

[@bluegreen5300]

How long is it gonna last for ?

[@just4electronics101]

I am still using it without any issues

[@forward_biased]

where you from???

[@just4electronics101]

I am from jaipur rajasthan

[@theramsey9123]

If you use a drill screw it will be easier

[@ognjenjosic1097]

Great idea but horible solidering

[@Comrade_YG]

I need helping solder hand to make a helping soldering hand 🤦🏻 I will make my own design or I’ll buy it from the stores if they sell things like this

[@asadshah5666]

who are wire

[@just4electronics101]

Asad Shah Taimoor Mughal actually I forgot the number I used i think its around 16 or 17 and do remember it is an aluminum wire and its cross section area is around 2 mm I hope that this will help you

[@polishedspectre4116]

Lol what u mean with ' who are wire' ur fuking dumppp

[@mraybeck]

Always the WORST copyright free music!!! I'd rather hear none...

[@justinpardo5116]

Hey the volume button does work. 2 turn down..

[@Mippi12]

@@justinpardo5116 thanks man , you saved my day !

[@jayateerthdambal]

veryyyy nice bhai

[@just4electronics101]

thanks bro for the appreciation & do not forget to subscribe.

[@MrOvo1231]

i would of turned it upside down so the solder did not show

[@sarladaga8215]

Music is quiet irritating. Can it be calmed down ?

[@lindabingham394]

more brown hands on u tube

[@shawnswagger156]

Good idea but you have to work on your soldering skills

[@FuchsHorst]

Use shrink wrap for the teeth of the crocodile clamps.

[@crazyahhkmed]

Black carbon fiber vinyl is so over used.

[@just4electronics101]

agreed

[@foodlove2369]

Very ugly works well but very ugly don't use crocodile clip use alligator clip they are much prettier than crocofile clip

[@flashdream2229]

Stop with this music.

[@darandaleramesh5519]

good

[@ilovemyhealth2514]

good

[@just4electronics101]

Thanks