DIY - HOW TO GUIDE: BMW CIC RETROFIT CODING

[@SmokeyBananas]

Used this to code my E90 today after retrofitting a CIC, which already came from a previous car I had CIC retrofitted. Thank you!

[@BoggyMountin]

Whats the program called? Is it possible to do retrofit cic coding using OBD11 Next Gen. I have a 2008 bmw e90 CCC

[@greyfoxmt]

Used this today to code my retrofit CiC into my 2007 328xi. Thank you

[@cavaleir1]

@greyfoxmt so far have you had any issues since coding you car, and does buttons on steering wheel work and does navigation work, thanks

[@nzalog]

This is exactly what I needed. The settings weren't perfect for my car but the video helped me with the process tremendously. Thank you!

[@MatissRiekstins]

This is video tutorial is the one that i was looking for! Thanks for showing me these simple things yet unknown for me. Thumbs Up!!!

[@gf3106]

Thanks. I spent ages researching how to do this, but once you have done it - it is very simple! Lots of bits of info missing, so that's why I made the video. Look out for the combox retrofit - I will be doing a video soon.

[@mariusfauru]

+alexqts please! do a video how to code a HIGH AC after retrofit the olb BASIC AC ! PLEASEEEEEE

[@42-BMW-M57]

after this step by step my CiC DVD player gives error as unreadable DVD. it used to work after the retrofit, but now it does not work anymore. I can no longer activate Navi. so this step by step guide does not work.

[@karanpatell1]

For coding headunit F10 which option should i select?

[@DjTavy]

It will work with a new CCC module? NOT CIC! Thank you!

[@Fancy669]

Hello, I had the CIC installed by a person a while ago, but now he has a red unit on via ista (mask & CIC). Now I want to undo it and put my old screen back in. My production date is 1-12-2007, which is also in the FO/VO, but I still don't see a mask. Does anyone know how this is possible?

[@DaggaSoft]

I installed this and verified that the setting stuck but I dont see cic or cid as module options. Any idea?

[@TheDeReDm]

Dagga Soft restart car

[@FERDY500]

I did all the steps, but when I looked back again FRM has disappeard because of the codes, how can I get back FRM extension? Thank you

[@chadu9465]

Hi , anyone know what to code and what to change when changing little display to big and changing 1 disc radio to 2 disc radio ? should i enable CCC aktiv ?

[@absalambelouahchi4977]

HELLO I HAVE A PROBLEM CONTINUED INSTALLATION CIC code 0909 does not acknowledge CCC ON AGAINST BMW E60 THANKS FOR YOUR HELP

[@youessay7983]

Hi thanks for the awesome videos, iv e just replaced my e60 motherboard with one from an e90 lci that had pre set buttons when i try it with my faceplate it doesnt work but works perfect with the e90 faceplate. Do you know if theres a way to code my faceplate to the motherboard pls

Thank you for your great video. Can you please teach how to change the cic language? Thank you in advance

[@gamersground9297]

Easy to solve download google translate app then use your camera to translate.

[@menowtf]

Hi i have a problem with e91 coding, when I select e89 and press ok, i have the error: following feature is invalid for FA: B082

[@ju1c3washere]

I accidentally pressed Process Car and Code Car instead go on every ecu. Now a lot of things on car dont work. What should I do ?

[@nasdoes]

sell it to me

[@nasdoes]

sell it to me

[@romasjakevicius8635]

i should add build date like in video or my car date?

[@romasjakevicius8635]

bmw e60 i have

[@ArthurJGibson]

E63 6er here, I had to choose 'LMA' the second time around, and that worked just fine. This is probably the normal process for 5/6 series. Thanks! Strangely enough my iDrive controller (CCC) isn't behaving though, it's either top or bottom. Any clue?

[@victorduarte1530]

Hello, I installed cic in my BMW e89 z4 2010, but the idrive does not work. Only the radio and the cd work, but the display does not communicate with the idrive. what to do?

[@Samb-ps6vk]

Hi, can i use this video for replacing a damaged cic with a second hand cic?

[@videt_scit_dicit]

Is it possible to fool ncsexper by not changing the build date actually. Can I see CIC over there if I only delete old build date and add the new one then read CAS (w/o FA write for build date) The 2nd option: Can I back to factory build date after all coding? Is it possible? Will all settings work then?

[@cavaleir1]

So does the navigation work after this coding?

[@Rh3t0r1c]

Great video! I've got a BMW Z4 (e89) which didn't have sat nav. I bought a used idrive but so far haven't fitted it. When I do, will your tutorial work on my idrive/z4?Thanks

[@ghannes11]

Rh3t0r1c yes it will worl

[@rinnmaronn]

hi Can you be setting of light & Door lock from CIC menu?

[@mariusfauru]

+rinnmaronn yes you can

[@cavaleir1]

@alexqts does the satellite navigation work after this coding, thanks.

[@andrade8906]

Hi Alexqts. I have a e87 bmw 130ia with 606 Navigation System Business. BUT previous owner of my car upgrade to 609 Professional Navigation. ( Yes is better - Luck Mine) > But my navegation maps is 2012 and if i try to find upgrade with my VIN car i cant find. So where i can find the CIC head UNit code??? Do you know about to help? tks a lot. Good job with the video.

[@cornelus_e6059]

hello, we have ccc navigation on a BMW e60 and I retrofitted it to the cic and coded it, the music doesn't work well, i.e. the subwoofer under the seats is not heard and the music in the car is not good at all, an answer if possible, thank you

[@nijazvelic8126]

I have the exact problem, were you able to fix yours and if so how? Thank you

[@al3dhell831]

If you will do what he did your navi will not work. It's much more to do a complete coding.

[@carfreaks1024]

hey so this is the coding for a complete retrofit for a car that didn't have cic i-drive to begin with? I want to retrofit drive to my car, i know the plug on the radio is the same so if i plug in the cic unit along with the screen and everything and do this coding, it would work? Someone told me i would need a esc bypass module? what is that for exactly?

[@Caguirre64]

codificaria ud mi radio via remote, ya esta instalada

[@vivainfo610]

Does this apply to X1 E84?

[@alperiltas7054]

Are #0909 and $6VA codes written to NCS Expert during coding valid for all cic? because i know there are two models cic mid and cic pro

[@xSpeed2137]

you just use $606 (business navi) instead of $609 (proffesional navi) with the #0909 and $6VA if you have a CIC MID

[@kevpag]

Could you help me with the combox retrofit already did the cic with your video thanks in advance

[@Drmarshallmd]

Hi Kevin. This website has a great how to write up. Cheers! www.e90post.com/forums/showpost.php?p=25205606&postcount=4

[@regiss7151]

What chassis I should to choose if my model E60?

[@ronnierabell1]

E60 duh. When you code it to cas and lma

[@FilipeCoutinho]

For coding the e60 2004 need choise the FA (chassis) E60 or i select the E89?

[@RyuZoloo]

need to select E60

[@veiovis88]

@@RyuZoloo hy sir maybe you can help need to Code on a e61 CIC with combox how i do this?

[@user-zl6cc6uu8z]

Hi my e93 dash was empty just the radio system I've retrofitted a dash and the CIC system, everything is working plug and play but CIC is not coded to my car and not added to the vehicle order, I've added #0909 and #6VA in the vehicle order and coded the cas and frm FA write. The #6VA is showing in the vehicle order list but the #0909 keeps disappearing I've tried recoding that into the vehicle order after the code when I check again it's disappeared. I've seen you deleting the #0607 from your VO list, but the #0607 is not on my VO list at all, so I don't know which VO I need to delete I had the factory radio CD player no screen at all

[@gf3106]

Jushed Ahmed Hi mate it’s been a while since i’ve done this but 0607 was my build month and build year. So yours will be the numbers for your build date. Hope that helps. A

[@brakbrak2260]

e60 is same??

[@Paulgsm]

I have only CAS and LMA *e60 2006. No FRM ot NFRM ecu !!!!I I coded only CAS and in the end CIC but no Navigation active. Should I code LMA too ?

[@ronnierabell1]

Yeah e60 you code it to cas and lma. Nfrm is only for 3 series

[@cretzo0]

Hello alex , so for example on my e46 2002 i want to have BFD active but since my LSZ module does not have that option available it's C32 and i need .C36 i wan;t to retrofit a newer model of LSZ like a 2005 one, so i do exactly how you did right ? and do i have to add 2005 build date to the VO and update both modules that contain VO/FA because the newer LSZ module comes from a 2005 car ? . And why did you changed back your build date and erased the option you added ? . Thanx

[@mikechoi33]

hi, my car is 2006 E60 M5. Is the coding procedure the same as yours? Also code the CAS and NFRM only is ok? How about FRM?

[@gf3106]

Yes, I would imagine that the coding is roughly the same. You will either have NFRM or FRM as far as I am aware. (NFRM is new FRM) and CAS with NFRM / FRM is fine for E9X so should be good for you also.

[@mr.ogotit9737]

Hello, I have BMW E70 and want to code retrofitted CIC from 2012 E70. I have KDCAN cable and have cicdaten, NCSexper, BMW standard tools, and EDIABAS. Which program do I need to use and how ? Thanks in advance.

[@AngelLopez-ys6bt]

Did you ..? I trying but not able to ADD $6VA .. SOME HELP PLEASE ..!!!

[@edmfperez]

Hey, ​there I'm having some trouble with the second step in the FA_WRITE procedure. Whenever I try to perform the coding onto my NFRM module I get: "COAPI-1063: CABD-paramter error FA_WRITE". What should I do?

[@dkaloupis75]

Change the parameters

Nice video! I am collecting as much info as possible before buying all the equipment. Do your steering wheel functions work?

[@mariusfauru]

pleaseee Can you do a video how to retrofit code basic to auto IHKA bmw E60 PLEASE Please PLEASE 😋

[@TheDeReDm]

Marius Daniel Fauru not possible

[@sergiofartote8600]

Hi do you know how to extract vin number from the CIC , as i retrofitted but now i need the vin number from the CIC (donor car) to update the maps, can you help? Thanks

[@gf3106]

I think I did this by using the following: You can pull the vin using Tools 32. Load profile 00SWTKWP, and than the job FAHRGESTELLNUMMER_Lessen The vin from the CIC is than displayed under FG_RN might want to check it first though!!

[@sergiofartote8600]

Thanks i will try that way

[@alfistasubbie]

Hello, thanks for your very useful video, my E61 535xi came with CCC and I recently acquired a CIC headunit from a 2010 E60 535xi. Upon comparing the options between both cars, both have Professional navi, Voice control, HD and Satelite radio and everything else are the same. ONLY difference, mine has Logic7 vs Standard Hifi system. I am quite sure that this is easy to code to, but how about the Navi and Voice control? Any advice please?

[@tonyv321]

Did you ever find out if it’s possible or does it make a difference?

[@karanpatell1]

Also my old headunit has 4 pin lvds connector,new one is of 6 pin. I inserted the 4 pin wire in 6 pin connector. I heard the rest two pin is for voltage supply and isnt important so can i still use the same headunit to code and program as the new headunit keeps restarting. Why does it keep restarting? Do i have to code it properly?