DIY How to make a Kitchen Aid Cover

[@Pjwilliamson55]

Search forever for someone having a tutorial with pockets, thank you, the music was a bit louder than your voice but really needed this,

[@MsKayeLle]

Yes, I have learned how to turn music down during my voice overs over the years.

[@sandracedar368]

This was such a great video; love the cover. It can be made for any appliance, sewing machine, etc., by ajusting measurements. How fun would it be to make it reversable! I'd love to have the pattern. It would be awesome to see more of your DIY/Sewing-Quilting videos. THANK YOU 🧵🪡✂️

[@EVSimmonds]

Very informative and clear. I enjoy your relaxed and calming voice. Well done, thank you.

[@patriciarenihan1116]

my granddaughters mixer is a lift kitchen aid 5 qt. she would like me to make a cover for it. I don't have the mixer to measure but she gave me these measurements 12 wide, 15 inches depth and 17 high. could you help me with making the pattern. thank you so much

[@MsKayeLle]

patricia renihan ok so of those are the measurements I would say you are best to make your front/back piece 12.5" by 17.5" (with curve a top) and then your long piece would be 40" by 15.5". (I always over estimate the length of this piece because of the curve, best to have more then not enough) I have added 1/4" seam allowance. Hope that helps a bit

[@47dian]

Hi, thank you so much for this video and the link to the pattern. On a fixed income and the price for a purchased kitchenaid cover is $35. makes it hard to have what you need sometimes. I downloaded the pattern and with your excellent instructions I hope to have a cover made shortly. Thanks again and keep the videos coming. God bless you and yours.

[@MsKayeLle]

Diane Hughes i hope you enjoy making it.

[@PrairieMom]

Really good basic tutorial... I am making this for my daughter's standing mixer. I looked up the specs online at the appliance webpage for measurements.

[@stephaniespaltro3644]

I am ALMOST done with mine Kay, I just gotta trim and put the bias tape all around and then when I figure out how to upload the picture here, I will share it with you to see and laugh with me LOL Thanks again!~ was REAL easy so far!!!!!

[@MsKayeLle]

It is very easy to make just takes some time. You can always email me a photo or post to my facebook page and share. Id love to see how you did and I am sure I will not laugh. We all have our own unique way of sewing.

[@kathymaultsby4545]

Great video! I just bought quilted white fabric and will be making bias out of a contrasting color. I hope mine looks as good as yours!

[@MsKayeLle]

I am sure it will turn out great, sorry so late in responding. Would love to see it!

[@myturkishangoracatmeonkitty]

Thank you for sharing this tutorial. I wanted to make a simple cover for my mixer before it arrives and tried to go by the specs. However, it proved to be difficult when you factor in the curve so thanks for posting the measurements. I was kind of close with what I had come up with, but better safe then waste. Your cover looks better than anything I've seen for sale on the Internet. If you don't sell them, you should. :)

[@MsKayeLle]

D. R. Griggs the curve is the most difficult part i will not lie about that. I do make and sell them but only by custom request.

[@jackb1959]

***** I do not sew (I'm a professional chef) but I have been looking for a good quality cover for my Professional 600 model Kitchen Aid Mixer in my home kitchen. Your's is by far the best looking and high quality cover I have seen. Can you contact me for a custom made one please. Thank you..BTW very nice instructional video.

[@MsKayeLle]

***** Thank you, if you would like to order one please email me at kayellehandmades(@)hotmail(.com)

[@juliawebb8731]

I love it ,just what I need ,you can even use this for sowing machine cover ,thank you for posting this video

[@MsKayeLle]

I am actually making a sewing machine cover right now. Maybe I should film a video.

[@janbaker3547]

Thanks for this video. It was very helpful and I made a beautiful cover for my kitchen aid because of it!!

[@MsKayeLle]

Jan Baker That is awesome to hear, I would love to see a photo.

[@audreylang819]

Hi! I watched your video, but couldn't find the link to the pattern... Where can I find it? Thanks!

[@wilsonmcmeerkat4805]

Thanks for the video.. made one yesterday from watching your video. Material isn't exciting, its all I had *a gold Broche* I used the S zigzag setting I NEVER used it or knew what it was!! Its brilliant. I cant load photos of my finished cover but its great. thanks

[@MsKayeLle]

I had never used the s stitch either. It gives a different look to the finished cover is why I used it. I am glad you were able to make one. I need to make another one for myself.

[@5eagans]

I really enjoyed you're demonstration and the project doesn't seem so daunting now. I also love the way you quilted the fabric. The "S" stitch gave the fabric a really great pucker and I'm sure it will hold together nicely in the wash. I feel confident I can do this now and that it will turn out great! I bought a Kitchen Aid mixer in fuchsia (which is the color I wanted) but it doesn't match anything, so I don't feel great about having it sit out all the time. It's too heavy to drag in and out of the cupboard all the time. Making a great cover for it seems to be the answer for me. Many thanks for such an easy to follow demonstration!

[@MsKayeLle]

terri e thanks, I hope you find some fabric to match your kitchen decor and enjoy making your own

[@velmamilagros]

Great!! Clear instructions!! So pretty! I already started my project!! Thanks!!

[@MsKayeLle]

thank you, I am trying to draft a printable pattern.

[@jimsqueenie]

I loved your video and want to make this really bad as I have 2 kitchenaids. But, I do wish you would have stated what the size of your pattern pieces were. Thank you for posting your video on KZbin. It will help many people.

[@MsKayeLle]

Sorry I didn't put measurements in as kitchen aids are all different sizes I have found. I did however put a link in a comment below to help. Here app.box.com/s/791cboy8gx5nrk85vobu is the link again

[@beverlycristino6588]

*****

[@jimsqueenie]

Thank you so much!!

[@sharonmag3102]

Thank you so much for the pattern Kay. Can't wait to try it

[@debslater7115]

Thank you for the well done video instructions. I'm a very new sewer so need detailed instructions. I'm going to attempt it. Keep up the videos!

[@MsKayeLle]

thank you. I have a more detailed video that I would love to edit and post but my hard drive crashed (desktop literally blew up lol) and with the new baby I have not had time to make a new one and re record. If you have any questions do not hesitate to ask.

[@bethvoegeli4786]

I want to buy bias tape for this project. What size and length do I need?

[@ladydi4051]

Great job!Thanks for sharing this video.

[@pattycoyle1065]

Can not find the template.I have wanted to make one for a long time and this is perfect. Instructions seem easy to follow

[@LeighaBaer]

Thank you for the awesome tutorial. I'm still kind of new to sewing but I followed along pretty well I think. Going to give it a go and we'll see how it goes. Love the demo! Thanks so much!

[@MsKayeLle]

Leigha Baer I hope you enjoy making one for yourself.

[@carolmking]

How much fabric & batting did you buy?

[@MsKayeLle]

I did a 1.25 meters of cotton printed fabric and lining fabric and same for batting

[@carolmking]

+Kay eLle Handmades thank you Kay eLle.

[@juliadavis2577]

that pattern is the ends, whats the middle and pocket?

[@seahorse0000]

Thanks for sharing this. Can you provide us with the measurements you used? I think my Kitchen Aid is about that size. Thanks for your help!

[@MsKayeLle]

+seahorse0000 since the machines are all different sizes i didn't include my measurements. @s/791cboy8gx5nrk85vobu here is a link for estimate front/back panel.just length at bottom for height and width of bowl. Then measure from bottom left all the way to bottom right to get the length of the big piece and measure the depth of your machine. Hope that helps. If you machine is the same as the one i used i do know i tried the front and back panel link i provided and it was the perfect width but not tall enough so I just would add the extra and then measure for middle peice.

[@sugababes8]

thank you for your precise instructions. excellent video. my mixer looks exactly like your SILs(pic end of the vid). can i please have the measurements for the 4 pieces. i also don't knw how to get the curve sided piece. I'm beginner and would love to try this out. thank you

[@MsKayeLle]

I can help you out no problem. I took measurements of the machine and just curved what I thought. app.box.com/s/791cboy8gx5nrk85vobu here is a link to a template I found that may work for you to get the curve right, but you should still take measurements of your machine to make sure it will fit right. I am going to be making a 3rd one of these soon and video tape myself more making it as when I made my second one I changed how I made it a bit to save some sewing time and make it more basic for the beginning sewer.

[@astrogirl1usa]

***** Thank you so much! Do you know how to make a cover for a KA Food Processor too? All of my kitchen appliances are Kitchen Aid. I've had many of them for several years, without any problems. I did however ruin my mixer cover, by accidentally putting it in a hot dryer. It shrank, of course. :( Instead of spending more money on another one, I want to make it this time. So, thank you for posting your videos. I am a beginner sewer, so your videos are extremely helpful to see. Thank you!

[@MsKayeLle]

Astrogirl1usa sorry for delay in responding and thank you i try to make my video as clear as i can. I have not made one for a food processor yet bu ti do have a template drafted as i wanted to make one this holiday for a christmas gift. If you need help feel free to ask away

[@astrogirl1usa]

***** Thanks, I will. Congratulations on your (not so new, by now) baby! :D

[@MsKayeLle]

Thank you he has grown fast on me. Now 6 months old. Keeping me busy but we are on more of a routine now so trying to get back to my youtube channel with some more videos.

[@maxinewatts9647]

Measurements and seam allowances ??

[@evelynbrodberg9808]

What kind do you have

[@shelltful]

hi! Just watched the video and want to jump right in! Have the material I want to use. Have the pattern printed out for the sides..My KitchenAid Mixer is the 5 qt artisan also. My question is: I too, want to have the pattern of my material face correctly. which means I need to cut the long main piece in half, yes? What is the size of the one middle piece? Thanks so much for your help and the video! Can't wait to start!

[@MsKayeLle]

Hey remember the pattern may be smaller then machine. Hold up to side of machine just to make sure it won't be to short and add length where needed. To have same design on both sides just measure from one side to the other of you curve pattern add a half inch or so and divide by 2. Hope this makes sense.

[@brahms1545]

I love this! It's just what I've been looking for. I have a new kitchen aid mixer. You have awesome sewing skills and you've thought of everything. I love the pocket on the outside. Thanks for sharing. 😃

[@ibenez9758]

i love your video. I too would like your measurements. Mine is a 5 quart. Thank you for your video

[@annplatt4607]

How do you measure the mixer to know how big to cut pieces

[@bhartitomer3521]

Cutting tool ka kya naam h

[@MrsMags]

I just finished making my own using your pattern. I added pockets on both sides, though. Thank you for sharing!

[@MsKayeLle]

Yes Pockets on both sides makes it better, that was my sister in laws suggestion.

[@MrsMags]

Kay eLle Handmades I made the pockets even 9 on each side, but I wish I had staggered one. My whisk is a little big for the pockets...

[@jessieevans5951]

I have a 6 qt Kitchenaid mixer. Do you have a pattern for that size of mixer? Thank you! Can't wait to start sewing!

[@MsKayeLle]

+Jessie Evans in the previous comments there is a template. I recommend printing it out and holding it up to your machine to adjust height. the rectangle would be the length of the curve and depth of your machine.

[@birgitb.1190]

Have only now her video discovered .Your instructions like it very much . Have the comments all read what was not so easy . Unfortunately, I can not speak English u . Had to copy everything to me in google and translate . Was a bit cumbersome , but it went . Is it possible to integrate an automatic translator in the comments ? Would be great. Thanks for the video .

[@cynthiapulsifer3341]

this is amazing! you sound like me lol! I am itching to make one for my neighbor, but I have to go and measure her machine! rock on!

[@cherryanddaleedwards8227]

Really enjoyed your video, now I think I can do this!

[@thoughtsfromreadersbookclu4967]

Wow thank you so much! All of that helped me! But awesome work though! I love your stuff!

[@MsKayeLle]

+Thoughts from Reader's Book Club thank you

[@MsKayeLle]

+Thoughts from Reader's Book Club thank you

[@audraserbus8341]

The pattern you supplied is for the two sides but where is the pattern for the middle and the pocket? Please reply.

[@MsKayeLle]

Audra Brewer sorry for the delay. i gave a pattern of an average size one. its best to measure the depth of your machine and go over from one side to the other. I have a video of how to measure the machine coming soon. I didn't add sizes due to the fact that these machines were all different sizes.

[@carolmking]

Kay, I loved watching the video and was excited to make one but approximately how much fabric, batting would I need to start the project?? Excited but confused!! Thx

[@bobcat825]

I like this. Very nice idea.

[@dorissaxby8678]

How can I get the pattern for the stand mixer cover

[@MsKayeLle]

Doris Saxby since the machines are all different sizes i didn't include my measurements. @s/791cboy8gx5nrk85vobu here is a link for estimate front/back panel.just length at bottom for height and width of bowl. Then measure from bottom left all the way to bottom right to get the length of the big piece and measure the depth of your machine. Hope that helps.

[@1940Hat]

I enjoyed watching you well done video; I understand how to construct the cover; I did download the pattern, but what are the measurement of the pocket and gusset that the pocket is attached to?

[@MsKayeLle]

the side pockets were i believe 8" high by the width of cover. I do suggest putting something to counter the weight on the other side. this is something i have noticed when using cover that having blades weighs the one side down more.

[@jstar1966]

Beautiful Job and Thank you. This is exactly what I was looking for.

[@amlaboy]

Can you share what size mixer this was made for and also the measurements that you used for this particular cover? Maybe some of us have the same mixer. Or if not, we can figure out how to size ours appropriately. Very nice cover.

[@chassiee]

thank you so much for uploading this! i can't wait to try this!

[@MsKayeLle]

CR G Please share with me a photo of your finished creation, would love to see

[@campanitabonita69]

What is the name of the stitch you used to make it wavy? it looks nice

[@MsKayeLle]

It was a wavy s stitch.

[@gregteagle8002]

can you do a tutorial with measurements on the kitchen aid cover?

[@MsKayeLle]

+Greg Teagle hey I am actually in the process of doing a new one and will have a pdf file template for the curve pattern

[@swatiraghuvani4606]

hey this video is really cool. can you tell me what fabric you used ??

[@MsKayeLle]

just a quilting cotton, batting and lining. Used the same fabric as lining to make my own bias tape.

[@terryivey5374]

I am in love with this cover :) amazing job! What stitch is it that does the wave look? Is it something where you changed some settings? I have a quilt?sewing machine...but the poor dear is new to me LOL I'll be going in the room and trying to find the stitch for sure...but a little help please?

[@MsKayeLle]

hey there ot is a stitch on my machine. it looks like an 'S' I played with the length to make it wider. enjoy sewing. I am about to make a new one aswell

[@1812jay1]

Just love this video !!! What is the pocket for?

[@MsKayeLle]

J Treadway it so you can put your mixer paddle/blade. you can make it without too. I have made without and just leave my parts in the bowl. Some people use it to keep a few favourite recipes too.

[@CherieCunningham23]

Hello, did you take classes and how long have you been sewing? I started making quilts about 6 years ago and I am working on two now. do you have any ideas or tips on quilts and putting everything together. I am thinking about taking some sewing classes. This is so beautiful and awesome work.

[@MsKayeLle]

+Cherie Cunningham NO I did not take classes. I started being interested in sewing when I was 10 or so. My mom let me sew on her machine and showed me basics. The rest was trial and error a lot. I asked lots of questions and researched many things before I would start a project. For quilting, I do not do it as much. But I can say measure twice cut once, baste stitch where needed, press and spray adhesive will all help you.

[@ibenez9758]

Sorry I could not see where to download the patttern. Thank you

[@MsKayeLle]

Ibenez97 i dont have a pattern for it but i did find one online and i have a link in the prior comments. ill see if i can find it and send it again to you

[@MsKayeLle]

Ibenez97 app.box.com/s/791cboy8gx5nrk85vobu

[@MoonysMommy]

Very nice!

[@marylane-stewart8339]

thought it was great but you gave no sizes and deminsions

[@lisabryant3279]

I cut my fabric to the sizes that were stated in the link but they are obviously not the same that are supposed to be used, so can you please be more clearly in your measurements? Thanks..

[@MsKayeLle]

I am sorry it didn't work out for you. I have had quite a few requests for pattern, I am making another one this week for an order so I plan on video taping how I came up with pattern and showing my newest way on how to make this. I originally didn't put pattern in cause I figured people had different size machines.

[@patbecker9361]

The Best!

[@bookaholic4ever]

would of loved this but you dont give sizes to cut and deminsions

[@MsKayeLle]

+Loretta Turner I am sorry I have given a template in prior comments. You would have to adjust height to your machine though

[@theknittingcraft3151]

Very useful video 👌👌👌👌

[@porkinwitz]

Do you have any for sale?

[@MsKayeLle]

I am currently making one identical to this one and will be having them listed on my site for custom order

[@CordulaPrice]

What size?

[@MsKayeLle]

I cant remember the size of my machine but I did give a link in a prior comment with pattern. just length at bottom for a taller unit or widen curn/width for bigger bowl

[@griceldacastillo9139]

can you make a tutorial on how to make a ninja blender cover please :)

[@MsKayeLle]

+Gricelda Castillo I am acutally thinking of making a cover for my magic bullet so I will see how that turns out.

[@sdeeley1949]

I love this!!!!

[@humbe2dl]

I love this tutorial and can't wait to start! You mentioned earlier that you might have a pdf file template for the curve pattern... is this available? Thank you!

[@sandracedar368]

I would love her pattern, too🧵🪡✂️

[@vimigisby4208]

The demonstration was carried out much too fast with fast movements that it was difficult to follow.

[@MsKayeLle]

i am sorry, if you want to email me at [e-mail] I can try and help you through it.

[@alexisdiaz515]

Very nice easy tutorial

[@MichaelSmith-iz8wf]

that's amazing

[@ArwaMSamir]

It's verry nice thank u

[@MichaelSmith-iz8wf]

wow

[@critbin7372]

👍👍👍

[@devikagogoi4061]

very nice

[@1812jay1]

Thanks !

[@angelasutton7629]

i agree with some other comments far to fast

[@yasmineabdlra7man828]

thank you شكرا

[@arshiyaarshi756]

yasmine Abdlra7man by no

[@sarazohor8269]

waw

[@jammujammu8746]

nice

[@bhagyashreesakpal7233]

nnice भाग्यश्री

[@raziaitesheva7718]

спасибо!!!

[@Fatima-mp8mv]

روعه

[@jammujammu8746]

nies

[@dorisstratowski7376]

Thanks!