DIY How To Seal, Fix, or Replace Forgiato 3 Piece Wheels/Corleone/Rucci/Asanti/Lexani

DIY How To Seal, Fix, or Replace Forgiato 3 Piece Wheels/Corleone/Rucci/Asanti/Lexani. Enjoy.
-Instagram: @_classicmusclecars_
-Music: (via KZbin Audio Library)
-Disclaimer: I do not own the rights to the music played in this video.

[@marktamasi6189]

WOW THANK YOU THANK YOU!!! To everyone in the comments... This guys saved me big.. Smooth back yard but professional work. done right! I have (26") Three piece Ashanti Wheels that are 15 years old that I want to re chrome the lip.. This video just helped me complete two rims .. I just ordered the silicone from amazon. I love my rims and have no regrets and I love doing this myself. Thanks a lot again Classic Muscle Car

[@whipzpaintlyfewithjay9654]

Much thanks bro, I have to reseal these Asanti 3 piece wheels that I took the face off to paint. And initially I was going to tire shop, but I ran into this video and this is a great relief! Thank you

[@patrickryan321]

Always wondered about this, thanks for the video!

[@classicmusclecars2020]

Yessir just trying to help out so people don’t pay them high prices at shops

[@aldawson4943]

New sub!! great job ! Think imma do this on my set since I'm wanting to powder coat them thanks for the video

[@classicmusclecars2020]

Glad we can help

[@jerrellflorence]

I know that I'm late to the party but this video although informative was not on my radar until I recently bent the outer lip of my Forgiato. Now I've been researching repair's and how to's and I came across your video. My question is do I need a special socket key to remove the bolts holding the wheel together. I noticed that you didn't.

[@Faithful9er4L]

Thanks for the video bro!

[@ryanc8786]

Man this video is a lifesaver..i have a set of custom 22" Rucci forged swoops and 3 tires went flat .took to shop they told me rims were bad.went to pick up, showed me where leaks were with soap and water..right near bolts where this seal is. would this process most likely be what i need to do so they do not leak. also is the process any different if 2 wheels (rear wheels) are deeper than the front two. not exactly sure what that is called when the rim is deeper but im sure you know what i mean. i can send pics if theres a way to contact you. these are for a custom ride and i have been in a panic for months trying to find replacements.. bought vehicle with these rims and all other custom work already done. looking forward to hearing from you Ryan

[@classicmusclecars2020]

Glad to help you can contact me on IG @_classicmuclecars_ you can send pics I’ll respond as soon as I see it

[@moe4772]

I was told that you have to make sure the middle piece is perfectly centered or you will get vibrations at different speeds. I did not see him do this...How do you make sure its centered?

[@Wideout4]

Nice and smooth wish i could ship these wheels i need re-lipped

[@norcalpressurewhips6998]

Thanks this video help me out 💯💪🏾

[@classicmusclecars2020]

Glad we can help. no need to pay them overpriced wheel shops

[@Macnificent78_]

Do you know a place that sell just the faces looking for a diff set

[@fredjackson7584]

Yeah me too…You found any yet?

[@Macnificent78_]

@@fredjackson7584 hell naw

[@fredjackson7584]

@@Macnificent78_ Danmm…

[@MrBill22s]

Can I powder coat the entire wheel or should I leave some areas metal where the two barrels join?

[@devmo1914]

When should you perform this process and do you have to reaccomplish this sover time?

[@classicmusclecars2020]

Only when repairs are necessary

[@pepedagreat1]

Much love my family, thanks 🎯🙏🏽🎯🙏🏽🎯🙏🏽

[@classicmusclecars2020]

1luv uncle drew

[@shawnpeterson1825]

What torque spec are the rivets usually

[@stevenharris1826]

What socket was use to take the bolts off?

[@humpworm]

My problem is I can't find a reputable rim shop in Phoenix to fix my three-piece Forgiato Rims. 😏

[@RonSwifT405]

What type of scuff pad was that you used to clean the silicone off

[@classicmusclecars2020]

3m scotch bright pad

[@williedavismckennie5334]

Nice jb

[@MrNewyorkfynest]

If you just take the faces off, Would you still have to reseal the wheel?

[@classicmusclecars2020]

Yes you would still have to reseal it. Unfortunately taking the face off can break the seal. I recommend resealing it just to be safe and avoid issues 👍🏽

[@MrNewyorkfynest]

@@classicmusclecars2020 appreciate it !

[@gamesantrax2517]

Hi i have the twisted maglia forgiato rims, i was wondering how can i purchase half of the wheel the hlaf that goes outside is good, its the back part of the rim shell idk the term for it sorry, Since i fell in pot hole and one side of the rim got bent “facing car” thanks boss👍

[@gamesantrax2517]

Still need help!

[@ideazy1]

Its called a inner barrel

[@marizmendi1983able]

What size did you use to remove the bolts?

[@classicmusclecars2020]

13mm

[@trobinson3629]

👍🏾👍🏾

[@tonygildon7975]

Great video bro,but honestly as much money as this companys and shops charging for this wheels they should fix any problem for life of the wheel.i guess thats why i will never buy a set.to much money.

[@classicmusclecars2020]

I agree lol we just trying to help out anyone in the car culture try save some money