A very helpful video overall. I suggest changing the O-rings on the other fuel injectors while you have the fuel rail out.
@SaltCityEuros2 жыл бұрын
Great suggestion and thank you for watching
@konradzio86 жыл бұрын
Welcome back! Good to see you making videos again!
@VicsOneStop Жыл бұрын
I just did this job today for cylinder one. now it drives smoother then ever. easy job only took 30min tops with slacking..
@Florian10956 жыл бұрын
Looking forward to the oil gasket etc diys :)
@ismailbattal77303 жыл бұрын
You saved me hundread of dollars men. Apprecaited that. Only problem is in my case, The top cover of the electonic connecter to the fuel enjectors comes off very easily. I scare that cover will come off when I driving.
@rotorblade95083 жыл бұрын
I’ve just checked the injectors on my car. The rail didn’t come out easy but I managed to take it out. I’ve tested each injector with an arduino home made electronic controller and an air compressor to make the fuel come out and they were all perfect
@darinthomas7134 жыл бұрын
Thanks for video. Just to completed it, and it went off without a hitch! I purchased reman's for 49 bucks each.
@martymeyer41254 жыл бұрын
Do you have a link or company name for the remanufactured ones?
@julesjulianjules4 жыл бұрын
@@martymeyer4125 I got mine from FCP Euro. Remanufactured for 34 bucks each and they are identical to the original ones, even have the BMW logo on them.
@Picard1701ABCDE6 жыл бұрын
Wie immer schönes Video Nico. Wir haben deine Videos echt vermisst. :-)
@imprezaSOHC6 жыл бұрын
welcome back!! can you guys upload back the video where you guys did the oil pan gasket on the s5x swapped e30??
@Born114836 жыл бұрын
WoW! Welcome back Guys 👏🏽👏🏽👏🏽
@YaroCarHustle6 жыл бұрын
lets do the DIY ! all of those gaskets are notorious for Bmw... especially power steering reservoir and feed lines...
@n4sch3r886 жыл бұрын
DIYs für alle drei Dinge 👌🏻
@izyfication5 жыл бұрын
When i change an injector no need to program it with inpa ?
@rotorblade95083 жыл бұрын
I don’t think so, the car adapts itself constantly to the what flow of fuel the injector delivers but if the injector is not the same as the one it came with the car it will always show an offset in the fuel trims. But since that is oem it should be no problem at all.
@jhammond43443 жыл бұрын
Great video, thanks.
@bradleycrowell95785 жыл бұрын
I think the valve over job has already been done pretty well on utube
@acherion6 жыл бұрын
Good job, looking forward to future DIY vids!
@MrRod05 жыл бұрын
A couple of small things maybe help? Forget trying to undo the small clips on the injectors electrical just take a screw driver start in front and pull up slowly work your way back then center then back part thay we’ll pull right up you will not damage anything. And for the release of the gas pressure start the car and pull fuel pump fuse car will die and that will release pressure. Hopefully that will save some time. Also when taking out the injectors sometimes there stuck same thing use screw driver start front pry up easy center then back part take your time you want to try to pull up evenly....
@jsl32232 жыл бұрын
this video helps me a lot for repair mi car 👍thank you thank you
@SaltCityEuros2 жыл бұрын
So happy to hear that!
@samuelwilliams7331 Жыл бұрын
If you are having issues with the fuel line you need push the plastic cover in while pushing the towards the plastic cover.
@Growthguidedlife Жыл бұрын
Appreciate the video. Thanks. 🙏🏼
@jayz4dayz234 жыл бұрын
What code were you getting when you were having the misfire ?
@KevMk36 жыл бұрын
DIY really helpful 👌🏻
@oscararreola68556 жыл бұрын
DIY please on the oil gaskets
@navatiusbrewster11242 жыл бұрын
Hell Yeaa bra I gotta 2006 330xi I gotta do them I’m getting white smoke sometimes
@scottkucinski49674 жыл бұрын
Yep getting code misfire cylinder 2 and replaced both coil pack and plug and still getting code so next step is injector for cylinder 2
@Kloud9k4 жыл бұрын
im going through the exact same problem right now
@scottkucinski49674 жыл бұрын
@@Kloud9k yeah hopefully this solves our problem
@ritchierich28204 жыл бұрын
@@Kloud9k any update on how it went ?
@gustavobarison8444 жыл бұрын
Hi! Excelente DIY! I have a 130i with N52 engine! Anxious to see the power steering replace! Have you had a chance to do it? Send hi to Brazil man! Tks!
@matthewsfrawley6 жыл бұрын
Let’s see all three of those diy seal videos
@garciamakita6 жыл бұрын
Excellent
@Gripen856 жыл бұрын
Thanks a lot for this!
@Gripen85 Жыл бұрын
Did it on my 330i 5 years ago, now coming back to this video do it on our 530i. Thanks again! ;)
@noord7262 жыл бұрын
Thank you for the video, wenn you do it it looks easy, but for me it is I think to difficult, any thanks, i do not have a garages., are you shure it is for E 90 2008 , because there different injectors , greeting from holland. Amsterdam.
@SaltCityEuros2 жыл бұрын
hello this was done on a 2006 325i N52 engine
@postaboy20013 жыл бұрын
Excellenté
@SaltCityEuros3 жыл бұрын
Thank you!
@wichafroggy9 ай бұрын
I know this is an older video, but do you need to code injectors on a 328?
@MrChulijus6 жыл бұрын
DIY's wanted!
@PhilliesZone6 жыл бұрын
You can get the part remanufactured for $35 on FCP Euro
@texas0bserver7295 жыл бұрын
Their lifetime warranty is ridiculous. I used to buy exclusively from ECS tuning, but BMWs have some parts that fail every 40k miles, and FCP is the best way to go. If you buy a part from them, the next time you have to buy a replacement, you send back the failed part bought from FCP and they refund your recent purchase, less shipping. Awesome.
@PsalmMiracle6 жыл бұрын
When are you gonna do the gasket?
@moeleganem1234 жыл бұрын
i got P12BA code for injector 4 but however i have no misfire, i got rough idling sometimes and it is not consistent , if i replace the injector do i need to code the trim code ?
@damianspears24694 ай бұрын
What was the trouble code?
@肥宅小张5 жыл бұрын
Hello! I also have a BMW, and it also misfired with engine light on, and I used OBD scanner to check the codes. The codes are $07E8, and $07EC, do you know what do the codes mean?
@texas0bserver7295 жыл бұрын
Also works for the Z4 (E85/E86) non-M cars and 1 Series (E81/E82/E87/E88) with the N52. Actually also the 5 and 7 and X3 and X5s, every N52.
@kingpin160525 жыл бұрын
I was under the impression for n51/n52 that yu had to replace in sets of 3 (either bank one, bank two or both). also I thought you had to code the new ones to the ECU...? TIA
@jimmyfitsimmons34644 жыл бұрын
kingpin16052 you do so take note of the numbers on each www.pelicanparts.com/BMW/techarticles/BMW-3-Series-E90/FUEL-Fuel_Injectors_Replacement/FUEL-Fuel_Injectors_Replacement.htm
@stevenreinstadtler52675 жыл бұрын
The dealership said I got a bad injector in cylinder 4 on my 2009 E90 335i. Anyone know if they count the cylinders from front to back or back to front?
@Random.Adventures.3 жыл бұрын
Hi does the injectors need to be coded into inpa/ista
@3ricky132 ай бұрын
Engine still skips with new injectors plugs and coil packs
@martinoplistil69226 жыл бұрын
When i change injectors, i must reconect battery ? Thx
@eternal24k6 жыл бұрын
What were the problems you were experiencing? Chasing some weird flats and throttle response on my E91, no codes
@christophershiffer20955 жыл бұрын
I'm having the same issues with my 2006 325xi and have been thinking the this is the issue. were you given an answer?
@felderosa4 жыл бұрын
What do you mean by weird flats and throttle response?
@davidjones66163 ай бұрын
do you have to calibrate an injector replacement
@SaltCityEuros2 ай бұрын
@@davidjones6616 not on this engine.
@testing4485 жыл бұрын
Do faulty injector show up on scanner as a code?
@domnulkarp89736 жыл бұрын
Are you sure that's not injector 6?
@cameronjohnson15944 жыл бұрын
Can you send a list of parts used
@mr.krabbzkachow47323 жыл бұрын
What is the part number for the injector?
@ekinwynn6 жыл бұрын
Do they required coding/calibration like 335i?
@zBoost5 жыл бұрын
no
@5dirty535 жыл бұрын
zBoost you 100% positive?
@AlexE55Jr5 жыл бұрын
Mine keeps going when I push the valve
@DPR.Underground Жыл бұрын
Don't need to coding new injectors ?
@SaltCityEuros Жыл бұрын
No coding needed on this model
@anticona47113 жыл бұрын
where did you get the tool ?
@erikhay49742 жыл бұрын
Do you think a bad injector would cause a rough idle??
@SaltCityEuros2 жыл бұрын
Yes it would
@izyfication4 жыл бұрын
No need to use inpa to code the new injector ? Thank you
@julesjulianjules4 жыл бұрын
inpa doesn't work to code injectors on e90 n52. I went through he trouble of getting a cable and installing it, and the only one that has the injector coding is n54 engine.
@yaqoot752 жыл бұрын
Thanks A loooooot
@johntan34052 жыл бұрын
💯💯💯💯💯👍🏻
@82werk726 жыл бұрын
Any update on the e21?
@westjammin6 жыл бұрын
bring it back nico!
@ramoswcandido5 жыл бұрын
Nice, clear, very good explanation DIY video. Thanks a lot. Can you please make a video DIY to replace valve gasket? God bless you.
@AdrianJayeOnline5 жыл бұрын
BTW fuel injectors need to be coded !
@gelera184 жыл бұрын
Even on the 328i? I dont see that option on INPA or ISTA....
@stefanlitto2 жыл бұрын
Me drains the fuel in 2022. I will never financially recover from this 😭