DIY Jeep JKU Spring Spacers Bump Stops and 4 Wheeling

Howdy! Lots going on in this episode detailing the Saga of the 2013 Jeep Wrangler Rubicon here in the Autoedit garage...
We start out on the side yard where I install a set of 1 ¾” front coil spring spacers that I got as a hand-me-down from my buddy Ron at the local shop called Blackstone Jeep. The spacers were necessary to lift the front end of the Jeep a little since the Warn winch and Rock Crawler Bumper had really weighed it down. While I had the Wrangler on jack stands, I thought to install the Metalcloak Adjustable Bump Stop Extenders front and rear. This is a quick do it yourself job that helps tune your JK to the almost infinite amount of variables like tire size and suspension components.
Then, it’s time to head out to Hungry Valley Off Road Park for some location scouting for the web show I work on called Dirt Every Day … and a little four wheeling practice!
On the way I give a very detailed account of living with a Jeep JKU on stock suspension and 37” BF Goodrich Mud Terrain tires mounted to the original OEM Rubicon style wheels. Gas mileage, driving characteristics, etc. I tell it all.
Once at the park, I get my job done and take a few minutes to do a little four wheeling and discover some changes that need to be made to the Jeep for the next time out… but I do conquer an obstacle that had beat me in years past with my Grand Cherokee WJ!
I then go home and make those changes and take the Jeep out one more time for a quick test.
Don’t forget to subscribe to the autoedit youtube channel and share this video if you feel like!
Thanks for watching!

[@TheTomNelson]

I don't subscribe to much on KZbin, but your videos stand out with legit high production value; great editing, multiple angles, great writing and helpful info. Bit wordy and repetitive during the on-road section in my opinion, but maybe it's because I was anxious to see how the bumpstops handled off-road. Keep up the good work! My '15 Rubicon and I are along for the ride. We don't have 37s...yet.

[@herbertmasing]

Agreed! I drive a LR Defender, but I love these videos, because a lot of the topics are overlapping and are described here much better, also the video quality and narrative make it very approachable :)

[@panaforce]

All questions ever asked on jk forum are all being answered with logical practical demonstration with so much hard work and money of one jeepster's love of jeeps, what a great public service, bravo.

[@AutoEdits]

Wow, that is a very much appreciated compliment! I'm hoping that people can just pick which things apply to them and go down that road.

[@TrailRecon]

Thanks of the your impressions with the 37's! Jeep is looking great and looking forward to your future upgrades!

[@AutoEdits]

Thank you very much!!!

[@CainnechK]

I recommend the bump stops on ur last vide, Im glad u gave it a shot. I love the stance of that jeep man keep up the good work

[@kjhaglfjhgfasd]

I have a heavily modified jeep and I still love watching your channel, just because you describe and do things in a manner they are easy to understand and a great channel for any jeepers. I run stock 4.10 with 37s and am happy with it. So I cannot wait to get 4.88 and see the difference. 300hp on the 3.8L is a very good number to me.

[@SmoothBunzzzz]

And I was about to head off to bed but now I have to put off sleep so I can watch this vid! Keep up the great work man!

[@RK-kj8di]

me too.. :)

[@AutoEdits]

Thanks to both of you for hanging in there and checking it out!!! Besides, it might be just what you need to get to sleep...lol

[@Itsjusttim365]

I've been watching youtube videos for years and just wanted to say I just had my 13 year old show me how to subscribe to your channel because I had never done it before. Really like your videos and what your doing to the jeep. Keep it up, looks awesome.

[@brob44000]

This is by far the coolest build I've ever watched I get more and more excited for what's next haha never seen someone stuff big tires under stock suspension

[@AutoEdits]

Thanks! Not many people are silly enough to just attack their newer Jeeps like this...but it works for me.

[@VenomX72327273]

WOW, the background around 9:40 is the most beautiful valley, mountains ever! Nice JEEP!

[@oraivan1]

I watch each of your videos more then once and I have learned a lot from you. Thank you bro

[@rockchalkjayhawk0]

I have a 2003 Jeep Grand Cherokee and I loved your 99 build, keep it up!

[@jeffbark7294]

Thank you for making this video! This has answered some questions that I've had and now I will be able to do some mods on my Jeep with confidence! Love your channel! Keep up the great work!!

[@joshwolfe4655]

I like how u put the tires on first and built around it that the way to go. I am currently helping a friend re gear Dana 35s with 4 10 gears so that it will help with the 35 bfg km2 we just put on a 92 yj with 5 in fabteck lift

[@jasenjaz82]

With the binding issue, I wonder if that's why most companies offer a 2in in the front and 1in in the rear spacers for the leveling kits. I'm glad you went this route

[@xxPuRoEdHaRdYxx]

Great vid, I really enjoy the jeep videos 👍

[@reyokay]

Subscribed! Very informative video(s). Thank you for publishing this 'Jeep series'.

[@Stuka87]

Boy am I glad I don't live in the city :P Be happy you have the 3.6L, those of us with the 3.8L are down quite a bit on power to what you have. I run 4.56's with 33's and its about right. This weekend I went camping with the Jeep loaded down (Well, as loaded down as a 2dr can be), and just that added weight was enough to slow it down up here in the Sierras. Oh, and I have a flowmaster 40 and it drones like crazy, but this appears to be a 3.8L thing. Key to big tires and narrow wheels is to set the air pressure right. Set it a bit lower with a 12.50 on a narrow wheel, and it will be fine. Great Video, love the extensions that you put the GoPro's on to give a better POV.

[@AutoEdits]

Oh, the flowmaster 40 is a chambered can...swap that thing out for the hushpower series or hp2 series, that's what I have on this thing. You'll be much happier. Thanks!

[@Stuka87]

autoedit Yeah I plan on swapping it for something else. I LOVE the sound, but hate the drone when I am at around 2000-2200rpm.

[@MariachiMike20]

your videos are extremely well done and helpful. just what I was looking for, for being a newbie to all of this Jeep stuff..thanks man keep up the great work !

[@alpinestar37r1]

After watching your videos, I am going to go 37's like you until I am done saving for my Evo Double D lift. I bought the Teraflex 2in front 1 in rear spacer lift, Metalcloak bumpstops, 1.75 in Spydertrax spacers and the same flowmaster exhaust. Next month I will get the 37's and the Metalcloak overlines. You should get switch rear bumpers or trim the width down so the tires wont hit then you can have more travel instead of 2 in bumps in the rear. I am running an AEV tire carrier and going to mod the Evo Facia bumper to fit. Thanks for the motivation!

[@kristiancastillothegreenje1395]

I tried 37's and some guy told me that I needed to to a lot of upgrades on my Jk. Since is a 4 by 2. I really whant 37's on my jeep so bad. The thing is, First, I need to get back bumper, then upgrade the jeep until is 4 by 4. Then get anothe lift, mines has like 2 inch lift but it still rub. Lots of money just to get 37's but man, It's worth it. Good luck on your project!

[@jackmama6669]

That park looks awesome, even the beginners stuff

[@ricardoterleira]

Nice raptor hehehe. Enjoyed listening to the tire opinion. Couldn't agree more. If you remove those spacers and rims and get some AEV for instance, Savegre, gas mileage and confort and equipment saving will improve.

[@cicerox23]

Super small mod that'll make the Jeep look a bit better would be a stubby antenna, I love mine. Great videos, quality, presentation, information you've got all the bases covered, keep it up!

[@AutoEdits]

Ok, I'll look into that.

[@kenhicks6835]

Cool Ruby, I'm running 40's with 4.56, manual 6, love it!!

[@AutoEdits]

Thanks, what suspension do you have on your rig?

[@kenhicks6835]

Rubicon 4,5 super flex, added 1,5'' pucks

[@m.engelmann7237]

Thanks Jason for doing this. Gives me a bit of fix between DED episodes. The JK is looking nice. I thought you would need some hydraulic assist with 37s off-road...but I guess it's working just fine you without.

[@AutoEdits]

Thanks so much! I would appreciate the hydraulic assist...when I went to back up on the cement pipes I had to rock the Jeep to be able to turn the wheels!

[@larrylawrence2222]

I run 37's on my JK as a daily. No problems here. Plan on swapping out your drag link, tie rod, and ball joints for heavy duty components sooner than later.

[@ASuarez236]

Best videos on KZbin hands down! Can't wait for the rear bumper!

[@AutoEdits]

Well, I'm not sure about that...but I love the enthusiasm and appreciate that you enjoy the series!!!

[@TheThirdeye91]

Keep the vids coming! Enjoying your Jeep

[@kiloandgreg]

Hey keep up the great vids I love them , I had a old Honda Ridgeline that I did some off road in with 31,s no sway bars or abs and did pretty good for what it was but just bought my 17 jk 2door that I built for a customer a year ago on 35,s with a 6.5 bds long arm kit it's not a rubicon yet but will be in time it has 3.21 gears and gets 13 mpg on a great day I can't wait to get some 4.10 or 4.56s with real locking diffs , I'm new to the jeep world but haft to say I love it so much , it goes anywhere I ask it to like a good donkey, nothing stops it , I'm hooked on this jk thing .

[@voodoochild661]

Hey man where are you at ? Santa Clarita? You should do a little meetup or go to cars and coffee really enjoying your videos

[@AutoEdits]

Howdy! I am in SCV... and keep thinking about heading down to one of the cars and coffee things... maybe soon!

[@voodoochild661]

@@AutoEdits every Saturday between 7-9 in front of western beagle we have a good 200 car turn out just got a ran 1500 really digging your videos man hope to see you out there I’m right in Newhall

[@dtdavisd2]

It's great seeing someone run 37s on a stock JK, but one big argument I always read about is the stock axles aren't strong enough to actually wheel it, do you off-road a decent amount with the cameras off? I assume your axles are holding up ok? Any plans in the near future to strengthen the axles? Thanks for the videos

[@szarpainkiller4329]

Love your Jeep. Love your videos. They are awesome.

[@AutoEdits]

Thanks!!!

[@unmachinist]

Just a correction about what tire size fits, on a Stock JK you don't have to do anything to fit 33s

[@cesarhvillalobos6578]

Like it how your flow master sounds 👍

[@AutoEdits]

Me too!

[@chrissheffer6823]

Cool video! WIsh I had your skill sets! Would love to go off-roading at that park! Nothing like that around my place!

[@1911Fan85]

Awesome brother!! I'm loving the build series!! I can't afford a Jeep by any means, but I have a 95 Montero with crazy low miles I plan on dressing up for overlanding!!

[@AutoEdits]

Glad to hear that...anything you can do is what's important!

[@AS-zn6wp]

I really enjoy your vids.. Great progress on your rig. Keep it up!

[@najatybitar8615]

Great video and i love the quality! cant wait to see the next video about the JEEP!

[@ezzak01]

jason, you have done so much with the jeep. im little by little upgrading my 2016 wrangler sport.

[@AutoEdits]

Awesome!

[@tjc20]

Have you researched which lift you want to put on your Rubicon? I just got done putting the Teraflex S/T3 suspension lift on mine this weekend. I'm incredibly happy with it! I enjoy your videos; keep it up!

[@AutoEdits]

Thanks! I keep looking at the Teraflex stuff... seems very good and they make fun videos. I'm also REALLY happy with the Metalcloak products I've installed so far so they are the front runner right now. Plus, I've been fortunate enough to spend some time in the shop at Synergy Mfg. and their stuff is pretty amazing...so we'll see what ends up on here.

[@tjc20]

+autoedit I've also heard great things about Synergy. I don't have any experience with MetalCloak, but their stuff looks cool. The Teraflex system went together very well, is very good quality, and pretty cost effective (which was my deciding factor). I'll stay tuned to see what you end up going with!

[@Hawk130Gaming]

Hey Jason you should do a video on how you clean your jk it always seems so clean and I also have a black JKU 2014 rubicon and it is hard to keep it clean.

[@bshinn66]

Nice, old school Monster in the shed!

[@AutoEdits]

Good spot!

[@liambaartz4871]

What rpm is your rig running at 60mph in sixth gear ? Love your jeep man. Looks amazing with the 37s

[@oNEDYAHo]

awesome videos! always looking forward to the next one!

[@AutoEdits]

Thanks!

[@JeepinBailey]

great series on this jk project. always looking for the next. gotta say your film work/ narrative is awesome and fun to watch. question tho, do you think you need more lift still? your set up makes me seriously want to trade my 2 door with metalcloak lift in for a 4 door like yours.

[@AutoEdits]

Yes, I will lift the Jeep a little and upgrade the suspension.

[@mrfixit7058]

This is a great channel! How are your brakes holding up to those big tires? And do you plan on upgrading to the dynatrac setup?

[@AutoEdits]

The brakes are holding up fine but they do require a noticeable amount of extra pressure to get the same stopping force as before... So an upgrade is definitely in order.

[@rudyhelton7461]

you need to come to idaho and do some of our trails..

[@Gnaw85]

Sweet Jeep. Btw, what kind of mount are you using for your iPhone?

[@adamlemus7585]

I dig the videos man. Have to say that you production quality is real good. what do you use to film with?

[@AutoEdits]

In this video I used an OSMO with my iphone and a gopro and my old contour camera.

[@andreweatstacos6494]

So the beginning "vlog type video" was the OSMO?

[@jameshill7694]

*autoedit, I'm pretty sure I went through all of your videos looking for a DIY of your camera set up. As a JKU owner, I've been looking at ways to do an exterior camera mount set up to where I can view my tire placement in cab. I noticed you looking at your tablet as you were wheeling, my guess was, to see where your tires were lining up on that. Do you have a video, or could you make a video of your set up, (if you do have one)? I was planning on running a USB to laptop setup myself. And much later, a drone as a spotter.

[@blinkerfluid4712]

This has probably been asked before but can you pull out the springs and lift the axle up with tyres on to check to see if they hit the body work when working out bump stop height ?

[@twinstar818]

Great video again! Wishing I had a garage - darn condo HOA living!

[@exploderpilot]

Try your setup with a 37 that measure more true to size. A goodyear mtr/k or a nitto trail grappler in the same size measure almost a full inch taller on 9" wheels on factory wheels that are narrower they stand almost 2" taller.

[@skirmich]

You aren´t removing precious suspension flex by adding those limiters? If you are that serious about full off roading perhaps removing more metal material from the Fenders would be better? I don´t own a Jeep or anything I am just curious.

[@hunchoboss5099]

A black oak LED bar would be a great addition in my opinion 👍

[@MariachiMike20]

did you have to buy new axels for the front and rear ? would it be necessary on a lighter weight 35" tire ?

[@rogue109]

Did you burn out your clutch on that drainage ditch obstacle at around 16:00? I have a stick shift and always worry about how I drive it...thought I've only own manual transmission vehicles my whole life (nearly 50 years). I've never burned out a clutch myself, but I keep thinking this Jeep will be my first...on obstacles like you showed. What is the trick there?

[@AutoEdits]

Oh no, the clutch is fine. This was about the same as sitting in heavy traffic. It's a matter of learning the right gear and not slipping the clutch for long periods of time... it's a wear item and can be used as such.

[@skincha3187]

U mention all u need are 35" tires on stock suspension. would u recommend changing the front n rear gears or would the stock gears be ok with 35,s?

[@mitchellbundy427]

Hey man question did you ever put gussets and truss on your axles and are you running stock axles shafts

[@AutoEdits]

No truss or gussets and running G2 chromoly axle shafts.

[@mitchellbundy427]

Thanks for getting back cause I have basically the same set up as you and I do light wheeling where I live cause a lot of places close down here to wheel and people are telling me I need to do all that the truss and gussets cause the axels will just bend even just sitting in my drive way with 37s on

[@erwynnwillumalibehrens4031]

What do you think about the wheel spacers that you put on? I have a 2015 JK Sahara manual with 3.73 gears and I want to put 35’s. I have a 2.5 coil and suspension lift and it’s my daily driver. My after market wheels, I believe has a -18 offset but I want it out more with putting on spacers. A lot of people are saying not to because if my gears. But I like the aggressive wide tires look and I want to put 35’s on it. Would you recommend the 35’s and the spacers. I currently have 33’s on it and have no issues going 80 in the highway. I just fear the death wobble even with the 33’s, but will fear it more with the 35’s and the wheel spacers. Any recommendations?

[@AutoEdits]

Wheel spacers are completely fine. I ran 1.5" spacers from G2 on the Jeep for over a year with no issues at all. Buy quality spacers and take care of them and it will work great.

[@erwynnwillumalibehrens4031]

AutoEdits thank you for the reply. I love your videos! What are your thoughts about me getting 35’s with my 3.73 gears? They will be on 18” rims

[@AutoEdits]

That sounds like not enough gear and will make for a very sluggish jeep... but you can try it and know that re-gearing is going to need to happen.

[@larryavila5192]

your videos help me out big time. thanks..

[@Minimik001]

Do you have adaptors for them OEM wheels ? If you don't, do they rub anywhere in the suspension or tire again any suspension part ? Thanks in advance

[@check_this_out]

I want another wrangler but my wife isn't feeling it. she would love to see me buy the new Toyota Tacoma. I used to own both back in Hawaii way back when. she probably thinks jeeps are unreliable like they were years ago. has yours been reliable?

[@Jonesdawg79]

Do you think going with a higher gear ratio would help a smidgen with gas mileage? Like a 5.13 or a 5.38???

[@rbohn1]

autoedit...sounds like you're diggin the 4.88s with 37s. how do you feel they would be on 35s? Everybody always recommends 4.56s but I have added a lot of steel on my rig and get concerned they won't make me happy crawling...thoughts?

[@AutoEdits]

I think you would be very happy with the 4.88 and 35" tires. Your highway rpm's will be higher but you'll get a very deep gear and still have a beefy pinion for good strength.

[@drerikav]

another awesome video

[@laysmaxzin]

Hey excellent video.. But one question.. Do I loose the electronic sway bar system if I lift my Rubicon? is there any consequence against its unique system?

[@AutoEdits]

I like it and will keep it on this Jeep!

[@thatchersandow4139]

"now let your junk droop"😂😂

[@thealsatian4232]

Great video. Looks like you are running factory wheels. Are you using spacers to move them out?

[@AutoEdits]

I did use spacers from G2.

[@thealsatian4232]

AutoEdits thank you.

[@brandonmontz]

So here's a question. Since you can roll on 37's without a lift (taking the mods you made into consideration), what size lift will you eventually go with? I've been considering 37's with a 3" (utilizing flat fenders) but most of the lift manufacturers don't really endorse that size lift with these size tires. Thoughts?

[@victorcortes17]

I love your videos, I can't wait to get a jeep.

[@ozgultekin6100]

You did just fine without a spotter, Jason. Oh, and stop making me wanna buy a jeep. Lol JK, love the vids, keep 'em coming! I ll lift my Hyundai Sonata soon haha

[@AutoEdits]

lol

[@heyitschinoable]

I always wondered what to set tire pressure to on aftermarket tires and wheels?? Not sure what your input is on that? Obviously it wont be close to stock tire pressure since many after market wheels and tires are different wheel/ tire combo size.

[@gibbethoskins8621]

can't wait to see this rig lifted, would be cool to do some mods for camping

[@AutoEdits]

Great Idea!!! I'll start looking for that stuff...

[@joshwolfe4655]

thanks for these great videos

[@AutoEdits]

Well thank you for watching and taking a minute to say cool stuff!

[@codyshanecanales4069]

sorry....I mean what size spacers did you use for the springs in the front

[@jcvm123]

When are you going to lift that thing? Cant wait to see what lift you go for. Great vids man, jeep looks cool even w/o the lift.

[@AutoEdits]

Thanks a bunch!

[@mikeweckesser4450]

quick questions. Did you have to adjust or get longer brake line cables when you added the "budget spacer lift"?

[@This_Guitarist]

Hey Jason, can you list the GoPro extension arm and mount you used for your videos? They seem super rigid and stable.

[@AutoEdits]

The suction cup mount is called a fat gecko and the clamp is a noga arm

[@hershey42696]

My hard rock gets 12.8 with stock tires and suspension. I have an aFe rebel exhaust though. I wish I got 14 mpg

[@albertl3776]

Whoa what year do you have? 2011 or older? my stock 2013 usually gets @17 average. In 2012 they improved the engine to 4 valves and variable valve timing.

[@Magotdeth]

When you installed your 4:88 gears, did you have to also change your transfer case? I chewed up the 3:73's on my 2015 Sahara Unlimited and looking to upgrade.

[@AutoEdits]

This is a Rubicon and has a 4:1 transfer case but my buddy has a standard 2.73:1 like your Sahara and went with 5.13 gears with 37" tires and it now has low range similar to mine.

[@Magotdeth]

@@AutoEdits awesome! That’s 4000 dollars less I have to spend now. Thank you!!

[@reptilesmiami]

What exhaust system do you have? Sounds good !!! Love the videos keep it up . I'm in the same position as you trying to go 37 stock on a tj hope is goes as well as yours is

[@joshwolfe4655]

the 37 I'm just want to know is there any wobble or vibration. And sweet jeep

[@AutoEdits]

None at all, the thing drives absolutely great. Thanks so much for watching.

[@knightwing4]

Now that you've made space for the wheels, do you still need the wheel spacers?

[@AutoEdits]

Yes, they help with steering angle and suspension clearance.

[@Tact-Mack0397]

Happy 4th yay another video I love the jeep

[@AutoEdits]

Have a safe and happy 4th buddy!

[@Xcentr1cK]

Love your videos! Thanks! :) please paint your front inner wheel wells! I'm OCDing over it. LOL

[@MarkFisch]

I'm starting to like the no spare on the back of the jk! Awesome vid what's ur next build

[@xzone454wd7]

jcr off-road makes a good delete kit

[@AutoEdits]

I did order the Metalcloak Rear Bumper and Tire Carrier and will do a video on that install...of course!

[@MarkFisch]

+autoedit what bump stop are u using in the back. I don't think mine came with one in my rancho 2 inch lift and might need it for my 35s I want to add.

[@danoneil9988]

Another great video. Before switching to a new rear bumper did that exhaust ever give you any heat damage to the stock bumper? I asked once before just checking if that ever changed.

[@AutoEdits]

I'm still running the stock bumper and the exhaust has been completely fine on that.

[@jasongardner1910]

hey what mount do you use for your tablet and what is it attached too

[@mallkrawlerz620]

Is having too little bump stop Bad for your shocks?

[@shawnhudson7570]

hungry valley is in Gorman just outside of Los Angeles

[@albertl3776]

www.parks.ca.gov/?page_id=405

[@WildHobos]

Do you have any sort of locker or limited slip? Also what do you think about the bolt on wheel spacers? Ive heard mixed reviews about them.

[@v1sual3rr0r]

It's a Rubicon so it has both front and rear lockers.

[@AutoEdits]

Yes, what Shoshanna says!

[@Brandon-ni9ge]

Wheel spacers are very hard on the axles and need to be maintained. I personally would never use them on a vehicle that is driven on the highway but if it's your off-roader then it can't cause much damage.

[@WildHobos]

Would wheels with more backspacing not have the same effect?

[@Brandon-ni9ge]

HobosGoneWild sorta but manly because a spacer can be spinning at the same time as the wheel if the spacers bolts get lose and can cause damage over time. If your looking at getting rims for a fair price discount tire Direct isn't to bad. But it's all up to you its your vehicle.

[@redxj4968]

I need a 4,5 in lift and trimming my fenders to fit 33s on my XJ and I rub at times

[@lelandeggleston1041]

Can you park next to a stock JK so we can see the difference? Please.

[@AutoEdits]

I'll work on that one.

[@elcuhhh8761]

Tint the windows boss. It'll give the jeep a badass look

[@MarkFisch]

hey quick ? I'm adding 315/70/17 ko2s tomorrow. Have you had to upgrade you breaks with the 37s?

[@eastonhirsh4088]

Itd be wise to upgrade your brakes, but I have a buddy running 37 km2s on stock brakes and hes still alive

[@AutoEdits]

It's ok with the stock brakes but does take a noticeable amount of extra pressure on the pedal for the same braking I had with stock tires. I will look for a brake upgrade in the future.

[@corrollaS2010]

this my first time watching it's a great video.. how are those tires I'm curious about how they preform

[@AutoEdits]

They are very good!

[@corrollaS2010]

That's good to know I'll have to look into them

[@hectormendoza496]

IDK if you've already answered this question, but what tire pressure did you run when you were at Hungry Valley?

[@TheAUZZIEBOY]

hey jason love these videos. i have wanted a jk for a while now.should i wait a bit longer to get the pentastar over the 3.8? should i also invest in the rubicon over the sport or overland?by the way im from australia so our models may be slightly different.looking forward to more awesome videos.

[@AutoEdits]

Buy as much Jeep as you can afford. I found a crazy good deal on a Rubicon and am thankful for Dana 44 axles front and rear and locking differentials from the factory already done.

[@cammarcatos9111]

How does your jeep drive with the wheel spacers? I'm thinking about getting 1.5 rough country wheel spacers for my jk, does it affect the drive quality too much?

[@AutoEdits]

The spacers didn't change drive quality at all. The Jeep feels great on and off the road.

[@bradkillen]

Great video!

[@AutoEdits]

Woohoo!