it sounds great, thanks for sharing.

Can you please add the link the Motive pressure bleeder since there are many models.

Autostick is the best

FYI as of August 2023 the front control arm brackets have changed such that an exhaust loop delete kit is required for the driver's side front lower control arm to have clearance to travel. Also, the bracket is a bit difficult to install on the passenger side. On one hand, you don't have to weld the crush sleeve, but you *might* have to drop the fuel tank to bolt the control arm bracket to the transmission crossmember. I didn't have to drop fuel tank, and ended up being able to crowfoot the bolt from the front and tightened with a swivel from the back on the outer crossmember bolt. All that said your video is what helped me to decide on the same lift. I have 2015 2-door Black 6MT and have the same suspension as you (except 3.5", fox shocks, and no Db3 s in back because I run 35s). If I knew how to make a good video I would share the differences. At any rate thank you so much again Jason

Hi Jason, are you pleased with the metalcloak brand as far as performance and longevity? Would you recommend it to anyone?

In real life naturally aspirated that TA wouldn't stand a chance.

Right old school boot leg cars of nascar nos air tank fuel vin stamp number a green one

Don't try it on wet muddy roads with out. Hiting the break's just right

So game over usb kia cars

I miss rear wheel drive cars ...

nice car...¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡

Think this is doable with a vehicle that’s a manual? “Jeep TJ, DD. I couldn’t find a nice vehicle like yours and just got the Jeep. LoL

Can this fit in a 88 k2500 right? Since pretty much there all compatible?

If you had to pick one?😢

Sounds like stock exhaust,they sound awesome

I think this would have been more realistic if they were running from the cops and weren't worried about the paint. Fun video

Good looking truck man, this is exactly the look i am going for! I have the 2000 k1500 z71 limited edition model.

Ones heavier ones emmishened to crap. Dodge should win if both are stock.

Tip: As Super Clean is an excellent cleaner, it has almost no lubrication for painted surfaces. How to compensate? Add rinseless wash to Super Clean. I use OnR but really any rinseless wash will do. Typically, I use 1 ounce of rinseless and 1 ounce of Super Clean to 30 ounces water and it pretty much handles everything. If I need more strength, I’ll add 2-5 ounces of Super Clean to 25-29 ounces of water plus the 1 ounce of rinseless.

Just some good ol boys havin some fun !

I’m about a week I’m heading to my towns show we’re there is supposedly a general lee coming. My dad has the bandit so it’s going to be AWESOME seeing them together ❤❤

Goofy aah car

Where did you get that bumper?

Jason, You have a totally cool way of appraising this vehicle and offer all the respect it deserves without overplaying it - you must see to it you do more like this! 👌

Now jump the river !!!!!!

Fixing the Tahoe's stock brakes is EXPENSIVE that's why I don't do it. Costs far more than the trucks' worth.

😍🤯

So glad someone came up with a way to NOT destroy a vintage muscle car and she looks great ! You should build and sell those with all the ac and stuff working I would buy one.

In the 70’s it was just a motorcycle trail.

The good of boys got nothing on the bandit.. bandit all day everyday

Awesome Street Muscle car! The 392 is menacing, and is still competitive at the dragstrip and the street. But, as you said, the Challenger was not designed for autocross, they are dragracers. Plenty of streetable power at that trim level, FYI, the new Scat Packs have more HP.

Yep you're right I'd love it

Question does this work on low profile vehicles?

I need these cars and a place to store and play with them.

If you don't want to watch the answer is take a Sawzall to your fenders and bumper 🤣

What was the exact tire size spec wise? The 285-75r16 type number. ( I know these are bigger than that)

Something better is me driving over a railroad track

Hoping to get a response on a older video, I’m also doing a 2-3 inch budget lift on my 99 tahoe. I know about needing a little longer sway bar links for the rear, but what about front?

TY

Did you realize that you didn't bolt your torque converter to the flexplate. There are 4 bolts that are on the back side of the flexplate that go into the torque converter where you can see in your video the 4 bracket holes on the torque converter. Hopefully you just didn't show you bolting it together after the install. If you don't bolt your torque converter to your flexplate, it can cause a number of issues, including: Knocking noises High levels of slippage Rattling sound Soft or delayed gear shift Sudden and inconsistent vehicle speed changes Shuddering Low acceleration Throttle break down Affected fuel efficiency Crack between the bolt holes

Does this make is really cold like will snow come out of the vent?

Needs the antenna.

28:23 Masterful camera angle. 👏 👏

My mechanic is adamant about sticking to a four wheel rotation because of directionality with my BFG KM3 tires. I think he is completely off base. What say ye?

Thanks, Jason. More please!

Super cleaning your wheels, engine bay, and chassis will make your vehicle shine! We sent you an email, take a look.

general Lee already have a trans am

I'm gonna be honest, I truly love both of them just the same, truly badass

What modern dual sport is that then?

and I didn't change the filter?