Рет қаралды 680
Over the past two to three weeks, I have been working a bigger project to create a new computer desk for my office. I used the xtool s1 laser engraver to engrave and image on a board that I was using for the new desk. during the process I had to come up with a way of feeding the board through the laser engraver without messing up the image. After multiple days and hours, I was able to complete the desk. It has a poly urethane top to make sure it is shiny and easy to clean if there is for some reason a mess. I used a rising desktop base so that I can use my desk while standing as well. This is by far one of the most complex and time-consuming projects with the laser engraver yet.