DIY Livescope Rotating Mount Build

  Рет қаралды 175,068

Southern Reels Fishing

Southern Reels Fishing

Күн бұрын

Пікірлер: 203
@J.WannaFish
@J.WannaFish Жыл бұрын
4 year old video and still a helpful one. Thanks 👍
@SouthernReelsFishing
@SouthernReelsFishing Жыл бұрын
Thanks for watching!
@elkohr5314
@elkohr5314 10 ай бұрын
Can’t be more easier instructions. Thank you 😊
@i2oadi2unnei2
@i2oadi2unnei2 5 жыл бұрын
Brilliant! My brain is churning.
@skunkedagain
@skunkedagain 5 жыл бұрын
The absolute best solution. I really like the tee mod on the one. I'm doing mine like it. Thank you thank you!
@SouthernReelsFishing
@SouthernReelsFishing 5 жыл бұрын
You're Welcome!
@amack32
@amack32 Жыл бұрын
Great design but my only concern is the resistance not being strong enough on the pipe design to keep the transducer from turning in the water as you’re trolling. If you’re anchored down it’s perfect because you don’t have the water current trying to turn the transducer
@SouthernReelsFishing
@SouthernReelsFishing Жыл бұрын
Very True. I experienced this. I later modded it by cutting 4 slits about an 1 1/2 inches long on the top of the outside pipe. Then used and easy adjust hose clamp to clamp the outside pipe down agains the rotating inside pipe to add tension or even lock it in place. Works perfect
@amack32
@amack32 Жыл бұрын
Can you do a follow up video and show us your method and the end result?
@7citiesfishing
@7citiesfishing 5 жыл бұрын
i got to see this thing in actions! its amazin people!
@SouthernReelsFishing
@SouthernReelsFishing 5 жыл бұрын
Yes it is cool for sure! Good fishing with you this weekend!
@paulanderson2225
@paulanderson2225 3 жыл бұрын
Made one months ago works great. Only problem im having is that it spin to freely. Might add some cuts and Spring to add some tension to keep it in place
@SouthernReelsFishing
@SouthernReelsFishing 3 жыл бұрын
I did the same, a wrap or 2 around the top of the inside pipe works great
@Nateconleykayakfiahing
@Nateconleykayakfiahing 2 жыл бұрын
@@SouthernReelsFishing sorry I’m seeing this after my last comment. What kind of wrap secures the inner pipe from rotating so freely?
@duckhead0
@duckhead0 2 жыл бұрын
@@Nateconleykayakfiahing I'd imagine cloth tape maybe?
@Z71Ranger
@Z71Ranger 5 жыл бұрын
Thank you for posting this video it was a big help... I can't wait to try my new Garmin Panoptix Livescope.
@SouthernReelsFishing
@SouthernReelsFishing 5 жыл бұрын
Glad it helped!
@simwilliams5358
@simwilliams5358 5 жыл бұрын
Looks like a good setup
@SouthernReelsFishing
@SouthernReelsFishing 5 жыл бұрын
Thanks and yes it is working great so far!
@horacelee880
@horacelee880 Жыл бұрын
This is a GREAT Video ! I`m considering following your advice but I would like to see how you put your LS transducer on the bracket without using the extra adjustment "L" bracket. Your looks like you put it right up against plastic bracket .Did you use a different bolt to connect it??
@bobtomlinson8247
@bobtomlinson8247 19 күн бұрын
Great Video -- I just bought livescope -- are you still using this pole system or have you made more adjustments. -- Thanks for the video.
@SouthernReelsFishing
@SouthernReelsFishing 14 күн бұрын
Yes still pole mounted with a few changes
@patrickonasis1
@patrickonasis1 5 жыл бұрын
100% Blue collar fishing channel!Love It!!
@SouthernReelsFishing
@SouthernReelsFishing 5 жыл бұрын
Thanks! Yeah no sponsors here other than myself!
@kayakjoe
@kayakjoe 3 ай бұрын
They are not selling that inner pipe in the store anymore- what can substitute? 3/4-IN X 2-FT 160 PSI POLYETHYLENE PIPE
@jerryyanez5855
@jerryyanez5855 3 жыл бұрын
Bad ass build brotha
@SouthernReelsFishing
@SouthernReelsFishing 3 жыл бұрын
Thanks!
@outdoorexpeditionsusallc6496
@outdoorexpeditionsusallc6496 5 жыл бұрын
Awesome. Thanks for the video!
@SouthernReelsFishing
@SouthernReelsFishing 5 жыл бұрын
Thanks for watching and commenting!
@FishinYakker
@FishinYakker Жыл бұрын
Do you get any interference from your fins? Great build, thank you.
@SouthernReelsFishing
@SouthernReelsFishing Жыл бұрын
I can see them when I rotate that way, but no real issues in the long range view
@4ReelFishing
@4ReelFishing 5 жыл бұрын
Thanks for sharing this video!!
@SouthernReelsFishing
@SouthernReelsFishing 5 жыл бұрын
No problem, hope it helps!
@maxcole3930
@maxcole3930 Жыл бұрын
Thanks for sharing. So you just shaved inside of h-rail mount/inside to make it a larger inner diameter correct? I finally added electronics to my pro angler. I'm going to add the lvs34 system this month. But I need to make a pole mount. I already have H-Rail ram ball & 6" ram arm. I was looking at the ram tough claws. What length ram arm did you use??
@SouthernReelsFishing
@SouthernReelsFishing Жыл бұрын
Just long enough for the transducer to clear the bottom of the kayak when looking in any direction
@ElinkaG
@ElinkaG 5 жыл бұрын
I just bought the same system but cant figure out how to wire it all together correctly. Could you please explain how you wired the sonar module to the chart plotter? In detail of the connectors you used to connect to the power source. If you could make a video of the wiring process it self would be a lot of help for many people, me included. Thank You.
@SouthernReelsFishing
@SouthernReelsFishing 5 жыл бұрын
Thats a lot to explain. I would show it in a video but all the components are mounted inside my kayak...
@mrgoogan
@mrgoogan 5 жыл бұрын
I know what I'm asking Santa for this Christmas
@SouthernReelsFishing
@SouthernReelsFishing 5 жыл бұрын
Lol! Good luck!
@dmnguye69
@dmnguye69 3 жыл бұрын
So the scanner is on the right side of the yak, I'm assuming that you do turn the transducer to the left side of the yak as well and if so do you experience any issues with the livescope sonar hitting the bottom of the yak or it doesn't?
@SouthernReelsFishing
@SouthernReelsFishing 3 жыл бұрын
No issues, it clears just fine and is low enough to see under the yak to the other side
@johnmayo6906
@johnmayo6906 2 жыл бұрын
Is it just a matter of drawing a arrow on the turn cap in line with the front of the transducer to know which direction it is facing ?
@SouthernReelsFishing
@SouthernReelsFishing 2 жыл бұрын
Yes pretty much. Works better if you do it in the water pointing at a pole or something
@steveon12
@steveon12 4 жыл бұрын
Dude you even gave us a shopping list! Thanks!
@2musiclover534
@2musiclover534 3 жыл бұрын
Bravo! Liked. Q: Is this stiff enough so that when you moving at 3-4 mph, it is still aligned and pointed forward properly. I realize that you can swivel this 360 degree horizontally in a circle. However, if you put it in perspective mode, can this thing also swivel 'vertically' when scanning in perspective model? Thanks again.
@SouthernReelsFishing
@SouthernReelsFishing 3 жыл бұрын
If you lock it down tight it will hold. And yes it will swivel vertically but you have to do it manually by pulling it up and moving it with your hand
@2musiclover534
@2musiclover534 3 жыл бұрын
Thanks.
@Nateconleykayakfiahing
@Nateconleykayakfiahing 2 жыл бұрын
I have this problem in which is rotated too easily and won’t stay forward at any amount of speed. What part you referring to ‘tightening down’? Mine rotated freely with no way to tighten.
@MBvideos553
@MBvideos553 4 жыл бұрын
Awesome
@phillipjenkins6279
@phillipjenkins6279 5 жыл бұрын
Sweet video! Thanks. WHere in NC are you at?
@chrisgetz8163
@chrisgetz8163 3 жыл бұрын
I have a lowrance hook2 5 splitshot I'm really new to this the transducer is a long 1 where do I mount it on my 16 foot john boat so if you can anyone please tell me where to put transducer thanks
@mingji5880
@mingji5880 2 жыл бұрын
can you make me one for my boat? let me know how much
@WereAllThatBored
@WereAllThatBored 5 жыл бұрын
How is your battery setup working out? Do you think 40 amp hours is enough or could you have gotten away with less?
@SouthernReelsFishing
@SouthernReelsFishing 5 жыл бұрын
So far so good, 40ah seems to be enough. I have gone 10 hours so far with only small breaks in the Livescope usage...
@michaelcass5319
@michaelcass5319 5 жыл бұрын
Hi is there a list of parts? Luv the video!
@SouthernReelsFishing
@SouthernReelsFishing 5 жыл бұрын
Yes in the description
@TheRick2130
@TheRick2130 5 жыл бұрын
lol, too late now.. patent pending, this is a hot commodity right now and only few manufacturer selling a mount for livescope and 360. while lowrance creating something similar to livescope the demand will be higher
@SouthernReelsFishing
@SouthernReelsFishing 5 жыл бұрын
Don't care honestly... this was just a short thought out remedy for an issue with my new setup. Not trying to sell it lmao! Good luck with your venture
@fredbarny7247
@fredbarny7247 5 жыл бұрын
H
@296skipweld
@296skipweld 3 жыл бұрын
I was thinking of a way to do this , you saved me a lot of thinking lol
@SouthernReelsFishing
@SouthernReelsFishing 3 жыл бұрын
Glad it helped!
@whooots
@whooots 4 ай бұрын
This is phenomenal stuff my man. I really cannot thank you enough for taking your time to put this out. I love it. By the way, what is the actual swivel mount you use that allows to to maneuver the pole in and out of the water? Thanks man, truly great stuff!
@GODTAA-FISH
@GODTAA-FISH Жыл бұрын
What’s the name of the mount that’s holding the livescope transducer? And how is it mounted on your kayak?
@davidspencer2663
@davidspencer2663 3 жыл бұрын
That’s slick!! Exactly what I’ve been looking for. Thanks so much for doing this!
@SouthernReelsFishing
@SouthernReelsFishing 3 жыл бұрын
Glad to help!
@CSLCW
@CSLCW 3 жыл бұрын
Are you sure you have the right link for the Rotating Knob Fitting? I purchased all this and the cap is too big for the fitting… 1” fitting but the cap is 1.5”
@CSLCW
@CSLCW 3 жыл бұрын
The correct part at Lowe’s is #22715 1 1/2” x 3/4”.
@CSLCW
@CSLCW 3 жыл бұрын
Mine came together well after I got the right part… but now I point it the direction I want to look and the wind/waves turn it the transducer,which is annoying. I’m guessing it is because of the Velcro I used instead of Zip ties, it’s a not exactly a tight fit. I wanted to be able to adjust it if I needed to and not have zip ties dig into the cord as someone else suggested… but might have to see if the zip ties make more tension so it does not turn as easily… Does yours ever turn on its own power due to wind/waves? How did you get it to not turn as easily?
@weofish1
@weofish1 5 жыл бұрын
What is the actual DO size of the white pipe, I'm looking to get the clamp on rail mount ball from Ram mount but I don't know what size to order, they have 3 different rail clamps.
@Check6slayer
@Check6slayer 4 жыл бұрын
Cut about a 1/2” off your RAM Ball adapter it will fit snugly for PVC Glue Welding.
@coolerfullofish
@coolerfullofish Жыл бұрын
Did you make this bc the alternatives suck? I bought a yakattack switchblade for my HDS live transducer and it always surfaces in fast current. Im running out of options. Will this build do the same with a ram ball? I fear that pivot point will also have trouble holding firm in the same conditions i am facing. Please advise kind sir
@SouthernReelsFishing
@SouthernReelsFishing Жыл бұрын
I built this becuase there were no options at the time. This was the first pole mount that I saw and built it our of necessity. I still use it to this day with just minor modificaitons. The ram ball is fully capable of holding it. If you have problems still just go up in ram ball size
@bobbychanthamixay8369
@bobbychanthamixay8369 2 жыл бұрын
Hey Jessie, great video. I saw a video of you fishing for bull reds yesterday on the boat and noticed you had a pole mount for it also. Did you use the same setup for the boat or something different? If different could you share? I’m going to be building one for my boat also soon. I hope to see you out on the cbbt one day. I’ve been fishing the 4th and 3rd island for the the past 3 weekends.
@hummer4u2nv11
@hummer4u2nv11 Жыл бұрын
Yes he did...search " $15 panoptix livescope rotating mount for boat " you will see his video for it.
@intheservstreets7394
@intheservstreets7394 Жыл бұрын
Can you use that setup with and name brand fish finder? I have a Lowrence
@SouthernReelsFishing
@SouthernReelsFishing Жыл бұрын
Yes it should work fine
@VAFSH4LIF
@VAFSH4LIF 3 ай бұрын
Great engineering Jesse. Thnaks
@brandonthompson5795
@brandonthompson5795 Жыл бұрын
Do you happen to have part number for that ram ball that had the female end to fit in the T? Google didn’t do much for me
@battlefieldoutdoors
@battlefieldoutdoors Жыл бұрын
We use the 1.5" RAM pipe socket mount. The part number is RAP-294U
@Davvid1
@Davvid1 2 жыл бұрын
Hi Jesse, I just had to come on here and thank you for the instruction video for the active Target pole. I had already done one using some jack attacks stuffed camera poles and stuff but just didn't work right and it was too expensive to be sticking that expensive pole down in the water. So I went to Lowe's and found the exact parts and had it all put together in no time at all it only cost $15 not even that I bought a couple extra parts and a Coke. And painted it gray I like the way you did the first one and I had the parts for that and grinding it was not a problem for me so I went that way and man does it work good thank you so much I'm going to try to attach a picture of the pole with the active Target on my Outback it's sitting on a trailer. Thanks again David Deponty.
@SouthernReelsFishing
@SouthernReelsFishing 2 жыл бұрын
I glad I was able to help. Sometimes the best solution is cheap and more effective than you could imagine
@jrm163
@jrm163 5 жыл бұрын
Here is how I made of my own, much simpler: use a 33mm whole saw and smooth out about 0.5mm of plastic in the PVC Tee adapter, so that a WHOLE standard 1” PVC pipe can go through without any cutting. That’s it!
@SouthernReelsFishing
@SouthernReelsFishing 5 жыл бұрын
Awesome man! As long as it works that is all that matters!
@CallSignWhiplash
@CallSignWhiplash 5 жыл бұрын
3M 5200 would work instead of JB Weld. Nice video 👍🏻🎣
@SouthernReelsFishing
@SouthernReelsFishing 5 жыл бұрын
Very true
@gabedispoto8552
@gabedispoto8552 Жыл бұрын
Hey! Great Video, can you send comment links to the h-rail setup you have already mounted? H-rail is connected to ?
@southernexposure123
@southernexposure123 2 жыл бұрын
Thanks for the video. I want mine rotatable, but not on the troller. Really good explanations, illustrations and description.
@ztemde978
@ztemde978 5 жыл бұрын
I am getting a boat in a few months and have been blown away by the videos of livescope but mounting it on the trolling motor did not seem like a great option to me. Manufactured ones are $150+ and I was thinking of a way to donut myself. Thank you for sharing your knowledge and experience. Very helpful, NC here too!
@SouthernReelsFishing
@SouthernReelsFishing 5 жыл бұрын
I have built a mount for a boat since I have one now, doing a video soon
@AsleepAtTheReel
@AsleepAtTheReel 4 жыл бұрын
Good video. The only thing I would suggest is making a line (Sharpe) or something to show which way your transducer is pointing. Was just looking through youtube for other video's to see what others did. Not trying to advertise my channel, but I built one for my bass boat in kind of the same way only I have a handle which shows me the direction that the transducer is pointing and it is longer obviously to get below my hull. Good deal man and great explanation.
@SouthernReelsFishing
@SouthernReelsFishing 4 жыл бұрын
I do have that actually, just didn't have it when I did this vid
@jube42
@jube42 2 жыл бұрын
So I went out and got the parts only to find out the measurements were way off. I got what I needed though. Trying to find a ram ball or equivalent to fit the t- joint.
@motorcycleislife8296
@motorcycleislife8296 2 жыл бұрын
Instead of the ram ball fitting, ram makes a clamp to ball fitting that will clamp grap the pipe and just use an arm to your tracking system and its done.
@SouthernReelsFishing
@SouthernReelsFishing 2 жыл бұрын
I have found that since, and do recommend it for all the new versions of this mount
@johnathonperez2557
@johnathonperez2557 Жыл бұрын
Do y’all have a link to the that Ram clamp I just want to make sure I use the right one.
@alananderson2961
@alananderson2961 10 ай бұрын
Awesome 😊
@09ironman1
@09ironman1 2 жыл бұрын
Do you have the build of your 1st one?
@SouthernReelsFishing
@SouthernReelsFishing 2 жыл бұрын
Still using it
@johndosha9404
@johndosha9404 3 жыл бұрын
Should your transducer be sitting horizontal in the water at very low speeds maybe one to four miles per hour
@denhaire
@denhaire 5 жыл бұрын
Do you worry about tipping over with your electronics on board? I did subscribe although I have a professionally built transducer mount on board my 18’ center console boat. Very informative video.
@dmnguye69
@dmnguye69 3 жыл бұрын
I just plagerized your built and noticed something. The rotation is easy but the size of the transducer on the bottom and the current could easily turn the transducer if you aren't holding it. I think i need to restrict the rotation so the current can't easily turn my transducer. I don't have the Garmin but the Lowrance ActiveTarget transducer, but almost same shape.
@SouthernReelsFishing
@SouthernReelsFishing 3 жыл бұрын
I just wrapped a few wraps of electrical tape around the top of the inside tube to provide friction
@JamesWilliams-nw5cf
@JamesWilliams-nw5cf Жыл бұрын
Jesse, great build. I just got into livescope for my PA14 and the transducer mount is all your idea! Question on one of your video's it seems ( watched many on this subject), the PVC cap used for aiming I thought I saw two different aiming marks, if so why? My system isn't installed yet so looking for clarity.
@SouthernReelsFishing
@SouthernReelsFishing Жыл бұрын
One mark is the center of the view in forward mode, the other mark is the center of the view in perspective mode. All I do is pivot the bracket up from one mode to the other and I dont have to rotate the transducer any. It's hard to explain but it makes it easy to switch modes
@rickziegelmeyer279
@rickziegelmeyer279 4 жыл бұрын
WHAT ARE THE GRAY TWO FITTINGS CALLED THAT ARE IN THE PLASTIC BAG
@jube42
@jube42 2 жыл бұрын
Would you be willing to build one for my kayak? I'm actually here in NC also. I would attempt to do it myself but I'd rather pay to have it built. Let me know.
@SouthernReelsFishing
@SouthernReelsFishing 2 жыл бұрын
Sorry just getting to answering some comments, I don't build them to sale at this point sorry
@dbfarm8974
@dbfarm8974 5 жыл бұрын
Thanks again for another very helpful video, been budgeting for the live scope system for my old town PDL and your transducer system set up looks like a perfect fit 😃
@SouthernReelsFishing
@SouthernReelsFishing 5 жыл бұрын
Awesome!
@davidwright4937
@davidwright4937 Жыл бұрын
WoW this is something I might have came up with drinking a 12 pack. But you came up with such a great idea at low cost. You really need to patent this before someone else does. What about V3 with a 90 degree elbow from a 1" to 3/4" with handle allowing you to point your live scope in that direction? Also are you using the live scope using the Panoptix perspective mode mount. Such a great idea man and when I build mine I am going to give 100% of the credit to you brother. You had open my eyes. BTW I like the scout setup while using my live scope to pan out schools of fish in open water. Again Great Idea
@davidwright4937
@davidwright4937 Жыл бұрын
ALso you can also match this up with a Lowrance Active target adjustable scout mode mount with 0 degree.
@COA_003
@COA_003 3 жыл бұрын
You willing to make and sale?
@109wpine
@109wpine 2 жыл бұрын
Do they make a longer black pipe? I have a 360 pro and I need it to be longer. I am talking about the inner pipe. I can’t find a longer one on the website
@battlefieldoutdoors
@battlefieldoutdoors Жыл бұрын
We've only seen it in 2-foot lengths, but if you could find pipe with the exact same outside diameter that would also work.
@johnhrzn1501
@johnhrzn1501 2 жыл бұрын
Where is the parts list located?
@OneObjective
@OneObjective 5 жыл бұрын
What size ram ball are you using?
@SouthernReelsFishing
@SouthernReelsFishing 5 жыл бұрын
1.5 inch I believe, Size C
@wadecole1796
@wadecole1796 4 жыл бұрын
You could also put a stainless screw or two through the pvc into the ram ball mount. Instead of the JB weld. Great video man. Lost of information.
@SouthernReelsFishing
@SouthernReelsFishing 4 жыл бұрын
Ended up doing that actually
@tim1198
@tim1198 5 жыл бұрын
Hi Jesse: I made some modifications and posted a video on this for a PVC mount. Thanks to your video which gave me some ideas for the mods. I gave you credit for starting this on the channel. Thanks again. Tim kzbin.info/www/bejne/Z5SXgWSod7Clbck
@SouthernReelsFishing
@SouthernReelsFishing 5 жыл бұрын
Nice work, glad I could help!
@davidthompson1529
@davidthompson1529 3 жыл бұрын
Brilliant. Thanks for sharing.
@dryfly14
@dryfly14 2 жыл бұрын
Hey Jesse, Awesome help on doing a DIY for the LiveScope. I notice that your kayak appears to have a clamp mount that is different from gluing in a RAM ball into a T connector. Could you put us onto whether you made it or bought it? Keep up the great work. Your DIY videos are fabulous! Thanks!
@ArbitraryLifestyle
@ArbitraryLifestyle Жыл бұрын
He said in the beginning it was a "hollowed out H-rail ram ball mount", but didn't show it because not everyone would have the means to hollow it out like he did.
@09ironman1
@09ironman1 2 жыл бұрын
Where you get ram ball mount?
@SouthernReelsFishing
@SouthernReelsFishing 2 жыл бұрын
Amazon
@09ironman1
@09ironman1 2 жыл бұрын
Could not find it
@6ecortes
@6ecortes 4 жыл бұрын
Great vid SRF. My only question is wouldn't the inner pipe the TD is attached to be too loose in currents?
@SouthernReelsFishing
@SouthernReelsFishing 4 жыл бұрын
I add a wrap or 2 of electrical tape at the top of the inner pipe to add friction if needed
@ryanpoole4386
@ryanpoole4386 5 жыл бұрын
Like your setup allot. Wanted to suggest using sheet metal screw for fitting the ram mount into PVC T. Still be rock solid but not JB permanent.... like this for my ice shack also as ram mounts are fast and don’t break at -30 (well mostly).
@SouthernReelsFishing
@SouthernReelsFishing 5 жыл бұрын
I actually did that when i duplicated this setup for my friend Chris on his Kayak, it worked just fine! Thanks for the tip
@iamremy-kl3xm
@iamremy-kl3xm 4 жыл бұрын
well done thanks for sharing
@everetthobbies2062
@everetthobbies2062 3 жыл бұрын
Thank u 🙏
@Rameur9
@Rameur9 4 жыл бұрын
Thank you. Merci beaucoup.
@ramlrobalero9461
@ramlrobalero9461 4 жыл бұрын
Why dont you look into a remote control Livescope mount. Im lookin myself.
@SouthernReelsFishing
@SouthernReelsFishing 4 жыл бұрын
Too complex, simple is better
@TomyTekOutdoors
@TomyTekOutdoors 5 жыл бұрын
Thanks for sharing this. I'll have to build something similar to this when Livesight becomes available. You just saved me a lot of time trying to figure out how to do it.
@ernie9819
@ernie9819 4 жыл бұрын
Great info, thanks ! Have you had a issue with the depth of the transducer getting interferance from your trolling motor?
@SouthernReelsFishing
@SouthernReelsFishing 4 жыл бұрын
You're welcome! And since this is kayak setup there is no trolling motor so that is not an issue. Now, if I point it in the right direction I can see the fins of my pedal drive moving in the live feed so maybe that is what you mean. But since you mentioned a trolling motor I am assuming you mean a boat application. I do have this setup on my boat and the same holds true. If I point it at my trolling motor I can see the shaft and motor unit clearly in the live picture. Of course it only shows at the true depth of the motor which is around 3 ft at the most when fully deployed. There is no interference other than that, just actual live feedback of where it is at the time. Something my uncle understands I'm sure...
@CSLCW
@CSLCW 3 жыл бұрын
Are you sure you have the right link for the Rotating Knob Fitting? I purchased all this and the cap is too big for the fitting… 1” fitting but the cap is 1.5”
@CSLCW
@CSLCW 3 жыл бұрын
The correct part at Lowe’s is #22715 (1 1/2” x 3/4”). Correct me if I’m wrong but I doubt it cause the one above fit the rest and the link you gave for that part gave me a smaller sized one…
@CSLCW
@CSLCW 3 жыл бұрын
Mine came together well after I got the right part… but now I point it the direction I want to look and the wind/waves turn it the transducer, which is annoying. I’m guessing it is because of the Velcro I used instead of Zip ties, it’s a not exactly a tight fit. I wanted to be able to adjust it if I needed to and not have zip ties dig into the cord as someone else suggested… but might have to see if the zip ties make more tension so it does not turn as easily… How did your friend get it to not rotate as easily? Mine basically spins freely whenever I move! Saw that you gave that one to a buddy…. Thanks a million of you answer for Pete’s sake 😂
@rolandonandin8169
@rolandonandin8169 5 жыл бұрын
Good stuff. If you want to sell me that mock version I would like to get it shipped...haha
@SouthernReelsFishing
@SouthernReelsFishing 5 жыл бұрын
Thanks, and sorry my friend Chris has already claimed it for his setup he's getting
@rickysmith2248
@rickysmith2248 Жыл бұрын
Very nice!!
@skunkedagain
@skunkedagain 5 жыл бұрын
I can't find the plastic coil pipe walking around Lowes. I actually needed a longer piper for the boat. Does it also come coiled for longer lengths?
@SouthernReelsFishing
@SouthernReelsFishing 5 жыл бұрын
My Lowe's stores has it in longer lengths coiled up right with the short pipe that I listed. Not sure if you can buy just a piece of it or not
@skunkedagain
@skunkedagain 5 жыл бұрын
@@SouthernReelsFishing i figured so. I took your idea and some comments below and came up with another solution. Saddle Tee as the holder of the 1" sched40. so there's no inner pipe, and the outerpipe would just rotate inside this saddle. I hope it works well. I'm also using the saddle for suppporting the transducer end during transport. Thanks for your ideas. www.lowes.com/pd/LASCO-1-in-x-3-4-in-90-Degree-PVC-Sch-40-Tee/3371266
@lawrencekarleskint5226
@lawrencekarleskint5226 5 жыл бұрын
1 inch schedule 40 is a good fit inside 1 1/4 schedule 40.
@AFishTale
@AFishTale 5 жыл бұрын
@@SouthernReelsFishing Manards store has the black irrigation pipe in 4 ft. lengths.
@williamcarr1678
@williamcarr1678 2 жыл бұрын
Great idea. 👍
@WildernessPursuits301
@WildernessPursuits301 4 жыл бұрын
Im buying the livescope this week im soo pumped
@SouthernReelsFishing
@SouthernReelsFishing 4 жыл бұрын
You'll love it
@Ed-wx1fe
@Ed-wx1fe 4 жыл бұрын
Great video! I'm thinking about adding a Panoptix to my Twin Troller boat and I'm wondering if a transducer can be mounted directly onto a Scotty mount @1:59 kzbin.info/www/bejne/Zpe2mqR6qbmcbpo (not my boat, btw) Do you think that will work? If not, I'd like to buy one of your kits if possible :)
@SouthernReelsFishing
@SouthernReelsFishing 4 жыл бұрын
I think it would work, as long as it is sturdy enough. I like the ram mounts because they allow flex and slippage when hitting something or in heavy current.
@jayrandall8561
@jayrandall8561 2 жыл бұрын
Hey loved your build but I’m having trouble finding a 3/4 inch sprinkler riser (or irrigation pipe as you refer to it). Can you let me know where you count it. All the box stores have 1/2 inch but nothing that long 3/4.
@tommyliu4683
@tommyliu4683 5 жыл бұрын
Best one I've seen! Good stuff!
@SouthernReelsFishing
@SouthernReelsFishing 5 жыл бұрын
Thanks!
@spencerjan88
@spencerjan88 5 жыл бұрын
Could you run the wires inside the tube instead of using zip ties on the outside?
@SouthernReelsFishing
@SouthernReelsFishing 5 жыл бұрын
Thought about it but didn't look like it would be better that way
@freezasama6309
@freezasama6309 4 жыл бұрын
Thank you
@ljohns5582
@ljohns5582 3 жыл бұрын
Thanks for all your time and effort. I appreciate you!
@SouthernReelsFishing
@SouthernReelsFishing 3 жыл бұрын
Thanks for the comment!
@MD11HOG
@MD11HOG 4 жыл бұрын
Awesome instructions and video. Don’t use zip ties on Panoptix cable though.
@arnoldlueders7500
@arnoldlueders7500 2 жыл бұрын
what should we use
@duckhead0
@duckhead0 2 жыл бұрын
@@arnoldlueders7500 use just not tight or run em through the pvc itself
@bakervinci163
@bakervinci163 5 жыл бұрын
Have you tried to address the mobility of this system? I went out got the first time and it is a bit flimsy. Hard you considered tripoding the portion that is below the mount?
@SouthernReelsFishing
@SouthernReelsFishing 5 жыл бұрын
No issues with that on my setup
@walte99
@walte99 4 жыл бұрын
I know this is an old post, but what schedule was your White PVC? You want at least Sch. 40. If you used Sch. 20, that may be your problem. Frankly, sch. 20 should be outlawed!
@rumblefish721
@rumblefish721 5 жыл бұрын
great video thanks
@NewZealandAnglers
@NewZealandAnglers 5 жыл бұрын
AWESOME... one of the best so far.. Thanks.
@SouthernReelsFishing
@SouthernReelsFishing 5 жыл бұрын
Thanks! Glad it helped
@gameopsdk
@gameopsdk 4 жыл бұрын
Do you by chance remember what the original knob on top is? I like the lower profile look better.
@SouthernReelsFishing
@SouthernReelsFishing 4 жыл бұрын
It is actually a hub piece out of a hobie cart sand tire lol...
@gameopsdk
@gameopsdk 4 жыл бұрын
@@SouthernReelsFishing hmm, probably won't go that route then... I'll probably just do the PVC version but try and cut the bottom half of the cap off and seeing if that works.
@DennisDuongV
@DennisDuongV 3 жыл бұрын
@@SouthernReelsFishing did it come off a Trax "2-30"? have one of them lying around
@tidewatertony1995
@tidewatertony1995 5 жыл бұрын
Thank you love your DYI videos you are quite the handyman.
@SouthernReelsFishing
@SouthernReelsFishing 5 жыл бұрын
Thanks! I have always been one to fix things myself if possible...
@mikeramsey9747
@mikeramsey9747 5 жыл бұрын
Pretty cool idea!
@jbattison
@jbattison 5 жыл бұрын
Thanks for sharing. This is a great and inexpensive idea.
@SouthernReelsFishing
@SouthernReelsFishing 5 жыл бұрын
Thanks for watching!
@waynem4844
@waynem4844 3 жыл бұрын
Very well put together.
@SouthernReelsFishing
@SouthernReelsFishing 3 жыл бұрын
Thanks! Still working 2 years later
@paulskog22
@paulskog22 Жыл бұрын
I have a question does the inner pipe come in longer length Iam trying to build one of these for my bass boat
@SouthernReelsFishing
@SouthernReelsFishing Жыл бұрын
I did a video on one for my boat that is suited for you. look for it on my videos
Livescope Perspective Mode Transducer Mount Build (WAY Better Than Garmin's)
16:42
Southern Reels Fishing
Рет қаралды 147 М.
Cornfield Fishing Gear
14:42
3 Pound Crappie Fishing
Рет қаралды 37 М.
GIANT Gummy Worm Pt.6 #shorts
00:46
Mr DegrEE
Рет қаралды 93 МЛН
Minecraft Creeper Family is back! #minecraft #funny #memes
00:26
when you have plan B 😂
00:11
Andrey Grechka
Рет қаралды 67 МЛН
The day of the sea 😂 #shorts by Leisi Crazy
00:22
Leisi Crazy
Рет қаралды 1,9 МЛН
$15 Panoptix Livescope Rotating Mount Build for a Boat
8:31
Southern Reels Fishing
Рет қаралды 125 М.
$30 LIVESCOPE Pole Mount!! (DIY)
12:30
Kansas Angling Experience
Рет қаралды 181 М.
D.I.Y LIVESCOPE Pole Mount HACK!!!
11:14
FredBFishinTV
Рет қаралды 18 М.
LIVE SCOPE TRANSDUCER POLE DIY (made from a bike mount) CHEAP!
11:24
Kolton Blakley- Criner Creek Outdoors
Рет қаралды 66 М.
DIY Rotating LIVESCOPE Pole Mount for Kayaks
22:51
Outdoor Quests
Рет қаралды 13 М.
How to build your own Livescope pole!
26:02
Outdoors with the Skrove's
Рет қаралды 15 М.
DIY Portable Livescope Mount
9:55
CATCHAHAWG
Рет қаралды 68 М.
D.I.Y. Kayak Livescope Pole | Ascend 133x
14:32
ACliff Fishing
Рет қаралды 1 М.
The ULTIMATE Live Imaging Pole System
11:01
Manitoba Fishing Adventures
Рет қаралды 26 М.
GIANT Gummy Worm Pt.6 #shorts
00:46
Mr DegrEE
Рет қаралды 93 МЛН