DIY Mason Bee Houses: Struggles, Lessons, and Sustainable Beekeeping Efforts

  Рет қаралды 4,646

S&J Forest Products

S&J Forest Products

Күн бұрын

Пікірлер: 31
@prinz10ga
@prinz10ga 2 ай бұрын
Great project dad.
@BillMulholland1
@BillMulholland1 Жыл бұрын
Hmm. That’s a pretty good idea.. Keeps them from destroying the house.. I’ll have to try that. Good to see the kids getting involved.. 👍
@tonyczuleger4591
@tonyczuleger4591 Жыл бұрын
Jason, Please in the future, use a block of wood clamped to the table saw fence as a stop to hold the wood off the fence to prevent any chance of a kick back. very dangerous cutting without it.
@BPeterson730
@BPeterson730 11 ай бұрын
The Mason bees like the holes to be super smooth with no jagged wood debris around holes and inside. Use a sharp drill bit and ream the holes out on high speed in and out fast to make holes smoother. I have even used my butane torch to burn off the whiskers. Also the correct diameter hole I have found that work well is with a 5/16” bit at around 5” and 3” deep. I also set the bee blocks in a dry sheltered area after summer is over. I enjoyed the video and your other channel Jason.
@davidrowe9168
@davidrowe9168 Жыл бұрын
I really enjoy this channel. The best bits for this work are the Forstner and bradpoint. It helps a lot to clamp the wood
@freddking4389
@freddking4389 Жыл бұрын
Hi Jason. Great video. They make out there a bit called a Forstner bit. They are available in long lengths. That will give you an absolutely perfect he with no rough edges. Look them up. You will like
@palatina6626
@palatina6626 Жыл бұрын
I have drilled many blocks like this. You have to use very dry wood. The holes must be absolutely smooth at the entrance and on the inner walls, otherwise the bees will injure their wings. The bees know this and avoid rough and damp boreholes.
@patricksawesomeprobarly3331
@patricksawesomeprobarly3331 4 ай бұрын
This
@UtmostOutdoors
@UtmostOutdoors Жыл бұрын
I loved the video despite lack of success. Would be cool to drill a variety of local wood varieties with a few test holes next year and see if it's a type of wood they like or dislike. You rock Jason!
@cairnskitchenrenovations3187
@cairnskitchenrenovations3187 7 ай бұрын
Keep up the great work!
@tommy153fishes
@tommy153fishes 2 ай бұрын
I do mine with dry wood and space the holes super close to each and alternate the sizes of holes because the native bees here are all different sizes. The smallest mason bees can be the size of rice and the bigger ones almost honeybee size here west of cascades WA
@russellsmith3825
@russellsmith3825 Жыл бұрын
I think you could sell the bigger blocks to flatbed truckers as dunnage, the supports for oversized and odd shadows loads
@TheSoteq
@TheSoteq Жыл бұрын
@SJForestProducts if you want to stick with this method i have one tip from making such bee homes myself: screw a thin wooden plate as a roof on top of it! it extends its lifetime by years and the bees and their breed stay somewhat dry, they can handle water or moisture to some extend but who don't like it dry?! also if you have reef or bamboo on your properties, they like those materials way more! maybe bundle reef together with wire, stuff those bundles tightly in old unused buckets (so they are safe from rain) and screw on those buckets wherever you want... if you secure the open side of the buckets with wireframe the bees will be safe from other animals and the bundels can't fall out over time... should be a very good diy solution that's cheap too, those prebuilt homes are way too expensive... and a big thank you for making such homes! nature needs every help it can get whenever we humans are around^^
@Veptis
@Veptis 2 ай бұрын
We had tiny cubes of concrete with holes.. not nearly this deep. And all were filled within a few weeks. haven't checked on them in a few years tho...
@semiproactive9625
@semiproactive9625 Жыл бұрын
Jason, I was curious why you started out by drilling into the end grain on your big blocks? As with your chain saw, the cutting is easier perpendicular to the grain like you did on the 2x6 boards. Dry is always better, and in my estimation the sharp auger is the best bit. However, it is self feeding so you may have to stop and back it out when depth is reached. I also wondered why you were cross cutting the beam pieces on a table saw, very risky. Thanks for all of your videos, love your channel.
@jbowerman50
@jbowerman50 Жыл бұрын
Jason, I have extended drill bits by welding a rod onto the end, line the bit & extension rod up in a lathe, you can always grind your weld down to under the diameter of the bit. But i would come up with a vise to hold the blocks while drilling.
@AmsNl2BcnEs
@AmsNl2BcnEs 5 ай бұрын
Really encourage anyone providing best sites for solitary bees to use layered blocks that can be opened up and cleaned out each year once the bees have hatched, otherwise are inviting parasites and disease into the nest the following year. Alternatively make sure to refresh the tubes each year.
@aperson1181
@aperson1181 9 ай бұрын
how do you sterilize the cacoons and housing after the season? where do you get the bamboo straw?
@rhw7879
@rhw7879 8 ай бұрын
I did see a mason bee in the top left side chilling out
@jam2190
@jam2190 Жыл бұрын
This is kool thought you was only a mining guy
@rickhalas
@rickhalas Жыл бұрын
What size holes? What type of wood is ok?
@CrownBees
@CrownBees 10 ай бұрын
To avoid attracting pests, be sure to use inserts in drilled wood blocks. You need to be able to access the cocoons when it's time to harvest in October (preferably a type of tray that you can open). And, please, avoid bamboo altogether. We want everyone to BEE successful!
@michaelpass2176
@michaelpass2176 7 ай бұрын
Are they honey filled?
@edheide7229
@edheide7229 Жыл бұрын
I just harvested my bees from paper tubes. To my sad surprise all the tubes had tiny holes in them and were all contaminated with mites and excrement. This is my fourth year housing these bees, the second year harvesting them. Have you got any solutions?
@westcoast8562
@westcoast8562 Жыл бұрын
BEST WAY TO DRILL ALOT OF HOLES IS LIKE THE MUSHROOMS GROWERS DO. GET YERSELF AN ANGLE GRINDER AND CONVERT IT OVER TO A DRILLBIT END LIKE THEY DO FOR PLUG SPAWN BUT THE DEPTH YOU ARE LOOKING FOR MAY NOT COMBINE. GOOD LUCK JASON
@michaelpass2176
@michaelpass2176 7 ай бұрын
Clamp the wood down on the drill press.
@w2male320
@w2male320 Жыл бұрын
Wheres Dan I bet he would love to play with your bees!
@monroecarpenter4347
@monroecarpenter4347 Жыл бұрын
ok but why, what is the benefit of these bees to you?
@WagonTrails
@WagonTrails 7 ай бұрын
bees polinate
@TimErickson-oc6sd
@TimErickson-oc6sd Жыл бұрын
Man you can really see climate change in the block you were drilling
Capturing and Relocating a Honey Bee Swarm - Saving the Buzzing Bees
19:35
S&J Forest Products
Рет қаралды 2,3 М.
Spalted, Figured, Curley Maple. Junk or Gold Mine??
5:39
S&J Forest Products
Рет қаралды 5 М.
Every team from the Bracket Buster! Who ya got? 😏
0:53
FailArmy Shorts
Рет қаралды 13 МЛН
Hilarious FAKE TONGUE Prank by WEDNESDAY😏🖤
0:39
La La Life Shorts
Рет қаралды 44 МЛН
ССЫЛКА НА ИГРУ В КОММЕНТАХ #shorts
0:36
Паша Осадчий
Рет қаралды 8 МЛН
Thinning Alder For Conifer Forest Establishment
10:10
S&J Forest Products
Рет қаралды 2,8 М.
How to make clean cuts with circular saw
13:55
Billshowto
Рет қаралды 1,4 МЛН
Timber Tuff Beam Maker
7:24
The Paul Dixon Outdoor Channel
Рет қаралды 72 М.
$200 Bullet-Proof Alaskan Chainsaw Mill Setup.  Build Your Own!  #80
33:30
Surviving Ringworm
Рет қаралды 1,6 МЛН
Skidding, Planting, & Deer Challenges on my 50 Acres in Skagit
14:42
S&J Forest Products
Рет қаралды 4,6 М.
How To Make A Simple Carpenter Bee Trap | Dad Deals
6:46
Dad Deals
Рет қаралды 46 М.
You’re Resawing Boards the Wrong Way
9:01
Newton Makes
Рет қаралды 195 М.
2. How do you make 10 frame bee hives from RECYCLED PALLETS?
18:14
Thankyou Honeybee
Рет қаралды 44 М.
Best Simple Carpenter Bee Trap
8:14
Marsh Rat
Рет қаралды 557 М.
SATISFYING WOOD WORKING MACHINES THAT YOU SHOULD SEE
25:04
TechZone
Рет қаралды 705 М.
Every team from the Bracket Buster! Who ya got? 😏
0:53
FailArmy Shorts
Рет қаралды 13 МЛН