DIY Milwaukee M12 Battery Fix

[@davidtran4760]

Just an FYI for those security torx bit, you can just use a small flat head and break off the center pin of the security torx bit allowing you to use a regular torx bit.

[@Ozzierob]

It’s t10 in size for anyone interested.

[@kctyphoon]

For what youre paying for the repair kits, you could just buy knock off m12 batteries and either replace the cell pack or use them till they die and then replace the cell pack. They use the same case. Ive used the upper part of dead knock off battery cases to fix my broken genuine Milwaukee packs.

[@Shmack_]

If you want the lifetime and power or oem battery its best to upgrade them yourself otherwise the amazon ones prob include the cheapest 18650s you can buy.

[@johncoops6897]

Note that you can just buy the black clips... no need to buy the complete shell. They are somewhat difficult to search for, and note that they only suit the old style (2-part no-screw) red casing design.

[@DiligentDave1966]

Good disclaimer in the beginning.

[@JB-pb9xv]

Idk how you manage to break so many of the battery housings, the only problem I've experienced with the M12 batteries. Are with the battery cells going bad. So naively have to buy me cells to take apart, find the dead ones and replace them. Or sacrifice one of the old batteries that has a 1 or more dead cells, to utilize the good cells in another broken battery. Debating on using a broken 3 mH amp, to fix a 6 mH amp. Or sacrificing a perfectly good 2 mH amp battery, to hopefully maybe fix both my 6 amp and 3 amp. Since both of those are better then the 2 mH amp.

[@drodriguez3935]

I don’t have this problem but Milwaukee batteries are more expensive than the tools themselves so if this happens to me and I’m out of warranty I’m buying the same battery Guting it exchanging it and getting what I paid for

[@divinicus]

I took your advice and I wasn't comfortable, so I got me a pillow and put it on the seat under my ass . Now I'm perfectly comfortable

[@strelokblackburn4651]

Idk what happened. But my 6.0 battery case just fell apart. Picked tool up by battery an clips just popped off. From they're on out its just been deteriorating. Notices today the red plastic part is cracking al to hell. I've never dropped this battery or exposed it to caustic chemicals

[@Shmack_]

I wonder if the 40amp 18650 vape batteries would work alot better.

[@damagecase13]

They definitely would and that's exactly what I'm going to replace my dead m12s with

[@jimyep9971]

Great, wish i'd have seen this a week ago. thank you i'll keep this in mind for next time.

[@simonlang678]

on my 6.0's its the little tabs that fall / break off and then they do not workl

[@icemonk12]

Great video Garnett👍🔧 i could use this for my older m18 batteries.

[@MrAlex25387]

I ordered a new shell while I was watching the video.. it got here before the video ended.. boy get straight to the point. We just Want our tools fixed.

[@kds471]

I like the way you talk man. Subscribed.

[@Codyray17ify]

I had one of these 6Amp M12 that wouldn’t charge after a little while….just the dreaded red / green flash……..then I read…..do not charge these with a rapid charger…..I used the regular charger…..and it’s just fine now.

[@Tigerratcat]

How do I use my 12v 40ah Lithium battery to power an M12 Tool? Anyone tried that before? I can get spade terminals onto the M12 Tool's Pos + and Neg- terminals, but there's a third pin labeled "T" that I don't understand

[@cameronforeman1043]

Is there a way to fix it to where it won’t fall out of the handle. That’s the problem I’m having

[@ryeweskey]

I've had that happen from dropping my Sawzall. It's likely the handle of the case that is broken. Try a worm gear clamp on the handle to tighten it up and hold it where it should be.

[@joeshearer1247]

How much is the new cases?

[@icemonk12]

Like 12 bucks there's link in video description.

[@richardbates2367]

Ive seen battery here recently no name housing and people have been swapping out the brand name Milwaukee batteries into them even a few of the new battery designs apparently the no name has already copied those as well which i guess is good for people with the broken batteries clips

[@philipdove1705]

Could I update my 1.5 and 2.0 to 3.0 by buying these batteries?

[@6atlantis]

No.

[@philipdove1705]

So will these be 3 amp now?

[@TrueBlueEG8]

Arent these batteries interchangeable anyway?

[@GarnettTools]

Interchangeable with what?

[@TrueBlueEG8]

@@GarnettTools each other? the older battery fits the newer tools, so whats the point of changing the case? Maybe I am misunderstanding .

[@GarnettTools]

It was explained in the beginning of the video that this was done in lieu of being able to warranty broken batteries directly thru Milwaukee

[@evanepp]

Great Video! Thanks!

[@philhugill8458]

Make sure you have fire insurance in your house if you mess with this !!!!

[@dubsbarry9963]

Dude you're the bomb! Thx

[@markchidester6239]

Nice! Is this a real fix or will they break again?

[@johncoops6897]

They will break again. It's a design fault that cannot be defeated.

[@Saladon89]

Cant u just only buy the new batteries and unsolder the old board off and solder on to the new batteries

[@michaelbaker4770]

Don't buy another Milwaukee tool is an option. The first company that doesn't have these battery problems should survive this depression

[@jeffcuevas5918]

Price doubled to 11.90 each

[@GarnettTools]

Yeah, I actually made this video a couple months ago, and due to the replacement housing coming straight from CHINA, the current pandemic might have something to do with the higher prices these days.

[@THATHATSALLFOLKS]

the best thing to do with these is to take it apart. throw away the internals and use it as a dust plug.then go buy the bigger ones

[@doncookbc]

min e you have to keep taking battery out and in to work

[@diegonunez6371]

Someting for the red and gren light in m12?

[@chrisfx9974]

need info on this this too

[@donmichaelcorbin4417]

Makes three

[@IdahoIsaiah67]

I got a brand new m12 5.0 battery from home depot that doesnt even charge. 100% dead. Im about to start buying from a different source and different brand too. I build houses and work on industrial buildings and dont have much time to be fixing bad batterys all the time. I give m12 a negitive 4 out of 5 stars. The m12 circular saw is junk too btw, dont waist your money on that junk. Buy makita or dewalt because they dont sell you shit that doesnt work.

[@markharris8806]

Hey good video

[@cmichalski420]

Are u from Pittsburgh u have that p burgh slang like in errre

[@beeret110]

Just buy Waitley m12

[@22Platypus]

Blam

[@johnmeiklejohn5470]

Is this a joke? What a mess!

[@santacruzappliancerepair2297]

OMG thats why my 1 yr old battery is dead! ITS A SAMSUNG!!!!

[@timnash6870]

TIM from Canada. Milwaukee M 12 batteries to Milwaukee you should’ve really thought of a better solution to your battery line. it is very difficult at times to get batteries out of tools.. The concept of your batteries was not a very good solution why is it so hard to push the buttons to get your battery out should’ve come up with better concept but I guess once it leaves your factory not your problem not surprising batteries and tools are the best on tool circuit today but should have been a better solution to getting batteries out of tools when it takes you more than five minutes to get a battery out you know there is a problem but again not your problem because once it leaves your factory again not your problem

[@Tigerratcat]

It's the worst battery shell design

[@grindcorgz]

Iv used milwaukee all my life and never had a problem at all and never had anyone complaining about not being able to remove it even with dirt ingress, are you sure it's not just yours?

[@timnash6870]

Tim from Canada.. every Milwaukee M 12 Milwaukee M 18 batteries I have ever used they do not go into charger. These are brand new batteries and trying to take them out of the charger is even worse now putting batteries onto the drills and other. Power tools, M 12 battery.. you need to fix the buttons on your batteries these do not work even with brand new batteries you people really have a lot to learn when it comes to putting on batteries now same thing goes M 18 batteries onto power tools is even worse. You know people do not say enough about the Ryobi tools or tool brand, but what I can say is the batteries and the buttons on all of the chargers and tools I have ever used. I have never had one problem taking batteries off of a tool putting them on a tool taking them out of a charger putting them on a charger. My problem is with Milwaukee M 12 Milwaukee M 18 battery line you people need to go back into the productions and figure out where you screwed up…. I sure wish I had a channel on KZbin. There is so much wrong with what goes on with these power tools… do you not get me started with the prices you people church here in Canada for your power tools three times the price of USA… I can go to USA buy power tools that are half the price of what you people are charging us. Canadians it is just terrible. . and to say people do not have problems with the batteries meaning that they are afraid to speak up against you people I do not hold anything back. If stuff is shit I will tell you straight out. Milwaukee supposed to be the pro tool line but the buttons on your batteries are subpar garbage needs to be fixed…. The buttons are too stiff. They need to have some sort of spring tension so you can push them but they are stiff. They do not work 95% of the time. Well that is my review of your Milwaukee tools….. doing these reviews tells me a lot people are afraid to speak up against what they buy me. I buy the tools as I need them. It would be nice to have a promotion tool sent and then I give my review, but I do not have a KZbin station. This is my setback for this.

[@timnash6870]

Tim from Canada brand new batteries from Milwaukee M 12 put in the charger buttons do not work on top of battery five minutes trying to get the stupid thing to go and then it shows red light because batteries do not want to sit in charger strike two on this battery..5 minutes moving around trying to get battery to sit into charger. No it is in charger still getting red light. I have to pound it three times on the floor now we’re just working brand new battery and worth shit now I got the green light on supposed to take a minimum of a half a day to charge batteries two days and still no charge again pounding on the batteries, now I got it to work. It is charged now cannot get batteries out of charger because buttons do not work…. no got to get vice grips out of toolbox clamping vice grips onto a battery is not the way this is supposed to work, but I got pressured enough to release the buttons.. after taking battery out of case no I take the hammer and smash the top of the vice grips brand new battery and worst shit.. seems to work now. Are you need pair of vise grips and a hammer to get Milwaukee M 12 battery to work?.. do you not get me started on getting batteries out of Milwaukee M 18 fuel tools, same production.. if I had a KZbin channel, this would be one of the highlights you would not want to see on your brand, new Milwaukee, batteries, pair of vise grips, and a hammer to get your batteries to work.. this is my review. Thank you.