DIY Misti Tool for under $5.00!!

  Рет қаралды 28,826

Jen Brannon

Jen Brannon

Күн бұрын

Пікірлер: 76
@sworley1956
@sworley1956 11 ай бұрын
I just stumbled across this! GIRL YOU ARE A GENIOUS!!! I see this is 6 yrs ago so I am not going to count on finding this box
@tynaheadrick-phipps6768
@tynaheadrick-phipps6768 Жыл бұрын
Great video. I am very late to stamping. Grateful for your video, clear instructions ☺️
@kcinca5410
@kcinca5410 11 ай бұрын
Good on you! I refuse to do business with My Sweet Petunia due to their disconcerting business practices. I'm actually surprised to be seeing more of these DIY's for stamping platforms in my feed as for a while, she was threatening content creators for "copying" her design (which she actually copied from a printing tool). I, too, refuse to pay an exorbitant amount for tools that shouldn't be priced that high. I know you posted this years ago and I do have another brand platform that does a terrific job that wasn't not terribly expensive. I just wanted to extend mad kudos to you.
@Bubs2375
@Bubs2375 5 жыл бұрын
When I first started to watch this I actually thought that it was a real stamping platform... This is one of the best DIY platforms I've seen, it looks amazing, it's cheap and does a really good job... So well done and thank you for sharing it with us... Have a fabulous week my lovely... 💫💜🤗💜💫
@lindaandersen4308
@lindaandersen4308 2 жыл бұрын
This is AMAZING!!!! I would love a real Misti but can't afford to pay the price. This is the best DIY I've seen for creating your own! Thank you, thank you, thank you!!!
@cgt6497
@cgt6497 2 жыл бұрын
This is the best idea I've seen so far!!! Looks so useful! Thank you!
@sharonpeterson2378
@sharonpeterson2378 3 жыл бұрын
Wish I had seen this before I bought my misti! Enjoyed this immensly! And you've given me an idea for cases to keep my dies in! Those wood cases are much more cost effective than the notebooks!
@SashasRevenge
@SashasRevenge 3 жыл бұрын
You are super clever to come up this idea. You can buy those separately from any hardware store hon. I’m the same way, it’s hard to spend so much money on things like that Misty stamper. Go you, how clever. I’m making me on now using plexiglass that I have left over from another project. ❤️❤️❤️❤️❤️👍🏼 Yeah, us folks on a budget who can’t afford those ridiculous prices on craft supplies.
@lisadelong1455
@lisadelong1455 7 жыл бұрын
What a genius idea that is. I love when people think outside the box. Great job!
@jenbrannon9290
@jenbrannon9290 7 жыл бұрын
Lisa DeLong thank you so much!!!
@loriwikoff1410
@loriwikoff1410 6 жыл бұрын
Lisa DeLong or nside the box! Ha!
@bobkat-john1468
@bobkat-john1468 4 жыл бұрын
You may be able to use the other part of the box to make a platform for wood mounted stamps. I am looking around for ideas on how make my own stamp platform for wood mounted stamps.
@mo-rie
@mo-rie 3 жыл бұрын
It's 4 yrs later, so let's go see what HL has in stock. Great job by the way!
@christiedecker2724
@christiedecker2724 3 жыл бұрын
I don't know why the 'Misti' costs so much, but I sure am glad for your video. Don't know that all the supplies are available now, but hey, I have a table saw, glue and small nails...I can build it from scratch with what I have, hopefully getting a scrap of plexiglass from the local glass shop...and if not, I'll figure it out! Thank you! Blessings on your work.
@hunybeeee
@hunybeeee 4 жыл бұрын
Omggg...... you are a genius!!!!! I had a Misti in my hands today. Carried it all around the craft store. I wanted it sooooo bad. But I put it back on the rack. I just could not justify the price. I knew there had to be a better way to get one way cheaper. Thank you for this video!!!!!
@usyungs
@usyungs 7 жыл бұрын
Great idea! Thank you for the money saver! Hoping my Hobby Lobby still has some of these wooden suit cases!
@diannamangrum68
@diannamangrum68 6 жыл бұрын
Great idea! FYI... you can get thicker Plexiglass at your hardware store and they cut it! Pick it up when you pick up your vent magnetic sheets!👍💕
@drikaweb
@drikaweb 7 жыл бұрын
The easiest and most well explained method so far. And I have been watching many many others. Congrats! Hugs from Brazil-Finland :)
@jennifermcdaniel8637
@jennifermcdaniel8637 Жыл бұрын
Love love it. Will be buying the things to do this. Thanx so much
@martinarett3460
@martinarett3460 2 жыл бұрын
Where do you buy chipboard or how do you cut it?
@mickeemickee3713
@mickeemickee3713 4 жыл бұрын
Thank you so much for doing this. I think you could also use a hinged shadow box.
@carolshain2163
@carolshain2163 7 жыл бұрын
this is the best DIY for the stamper that I have seen
@jenbrannon9290
@jenbrannon9290 7 жыл бұрын
Carol Shain, thanks so much! I love it and it works really well for me.
@sharon94503
@sharon94503 5 жыл бұрын
After watching this, I used a 9x9x4" wooden hinged flat jewelry box. You could use a nice wooden hinged cigar box too.
@heyitzantz
@heyitzantz 7 жыл бұрын
thank you for sharing. alot of the videos i checked out people didnt wanna share how they made theirs. they basically just showed you how it worked not how it was made. so thanks again . imma go and make me one now!
@sropehorses
@sropehorses 4 жыл бұрын
You could also put some washy tape on the edges of your plexiglas. Great idea, thanks for sharing!
@lynnemorton6055
@lynnemorton6055 Жыл бұрын
Hi Jen, what a brilliant idea. This video was a must for me. I cannot get a misti for love nor money. Well to be honest who would spend £60 when I can make one for less than £10. Could you tell me what the foam is for. I am new to wanting to make cards. You have a new sub. Thank you so much for sharing. Love from the UK
@loriwikoff1410
@loriwikoff1410 6 жыл бұрын
Great idea, and I am sure you are happy that mint macaron is back!!!
@clairegagne6906
@clairegagne6906 6 жыл бұрын
Hello Jen, I agree with everyone here, this is by far the best "make do" copycat Misti I've seen. I almost attempted to make one where one lady used the shadow box frame for kids art! But it would of been a tad more $$ to make. This is just the cats meow!!!! TY for your instructions and time to share with everyone who's looking for one.
@jenbrannon9290
@jenbrannon9290 6 жыл бұрын
Claire Gagne thanks so much for the kind words! Let me know if you make one and how it went!
@jillbaskett9925
@jillbaskett9925 5 жыл бұрын
Great video! Can’t wait to make one. Thank so much
@KenoBabe777
@KenoBabe777 5 жыл бұрын
Awesome! Best one on You Tube!! Thanks for Sharing! Heading to Hobby Lobby Tomorrow!!
@kristylovelove8307
@kristylovelove8307 7 жыл бұрын
YES, I REALLY DID ENJOY THIS! THANK YOU.
@wordscrafter
@wordscrafter 7 жыл бұрын
oh, i wish i'd found your video before i ordered dvd cases!!! this is absolutely brilliant!!! maybe i'll use the cases for diy stamp cleaners....
@jenbrannon9290
@jenbrannon9290 7 жыл бұрын
wordscrafter there are tons of uses for DVD cases! I'm quite sure you'll make use of them. Lol.
@bellnorton4453
@bellnorton4453 5 жыл бұрын
Fantastic job. Very creative.
@ruthiek5340
@ruthiek5340 6 жыл бұрын
I love how you say, "I can't care." LOL!!!
@456monaliza
@456monaliza 4 жыл бұрын
Wow genuineness
@lisarobinson9523
@lisarobinson9523 7 жыл бұрын
Great idea! Thanks for sharing.
@scherylb
@scherylb 5 жыл бұрын
Super awesome....I went tonight and bought a wooden cigar box, couldn't find one exactly like yours but it will work...already had the plexie glass so total cost 3.97 at walmart vs. the 70 bucks and something else I noticed is you have the ability to remove the layers for different types of stamps whereas; with the Misti I don't think you can do that so really this one is far far better then the Misti....Thank you so much for showing this video.....
@jenbrannon9290
@jenbrannon9290 5 жыл бұрын
Scheryl B I'm so happy that you were able to make one!
@jenbrannon9290
@jenbrannon9290 5 жыл бұрын
Scheryl B I'm so happy that you were able to make one!
@carolpope1145
@carolpope1145 5 жыл бұрын
Very clever. Good job
@RainorShine1
@RainorShine1 5 жыл бұрын
Need one of these.
@nightowl5396
@nightowl5396 7 жыл бұрын
Nice box you came up with. Yours came out really good Jen. I made several in different sizes repurposing things I already had around the house. As you have shown It's really not hard to do at all. Alternative things I used: Wooden picture frames, metal hinges with wood screws, cast off plexiglass from old storm door window which is easy to score with ruler and box cutter...snap it off at the edge of table...just be careful. I also used epoxy to attache plexiglass lid to hinges and similar materials as you used for inside the stamper. They are very sturdy, no lid wobble and give reliable impressions. I'm all about diy and saving money where I can. This is a big savings.
@Obsidian_Iris_
@Obsidian_Iris_ 5 жыл бұрын
Impressive! A final option is to mount graph paper to the magnet.
@lindasmith4515
@lindasmith4515 6 жыл бұрын
That was a great idea.
@marysjoy
@marysjoy 7 жыл бұрын
Thank you! What a great idea for the larger Faux Misti! Being fully customizable in regards to painting or decoupage, etc., is just a bonus, not to mention the price! We found your video two days after you posted it and drove, my husband and I, to two different Hobby Lobby stores in the Las Vegas heat. Too late... This is a clearance item (red and yellow sticker) so they didn't have these exact cases on shelves anymore. If anyone finds these, the clearance section is where they might be, and they would indeed be fortunate. Maybe Hobby Lobby will bring these back in stock sometime in the future, but I don't see that happening anytime soon with them readying store shelves for the onslaught of massive amounts of Christmas items. (It's July!!) I agree, the indented area would be perfect for lifting the clear sheet. We did find this right where you said it would be, in the candle isle. We will have to resort to getting a different wooden box. Hobby Lobby carries a few that look promising, but not as good as the one in your video. Once again, we make do on a budget. My idea for a similar-type largish box without an indent would be to cut the clear sheet to extend beyond the edge of the box a few centimeters, or keep the edge of the sheet flush with the box, but carve into the box slightly to make a slight indention for the fingers to easily lift the sheet. This is the best video I've seen on this so far because the CD case hack is too small for my needs and the picture frame hack is just something I wanted to avoid doing. The whole top sheet being clear and flat is the ideal and you achieved that here. With your idea, it can be beautiful, sturdy, and inexpensive! Again, thanks so much. Genius!!
@jenbrannon9290
@jenbrannon9290 7 жыл бұрын
marysjoy you are so welcome! Go get creating. Lol. I would love to see yours when you are finished!
@barbaramaroney1561
@barbaramaroney1561 7 жыл бұрын
Marysjoy : Buy the cigar unfinished box :) makes a 8 x 8 1/2 . Come out great :)
@just_peachy6582
@just_peachy6582 4 жыл бұрын
You are to cute! I have to do this ! Great idea! You go GIRL!
@lyllydd
@lyllydd 7 жыл бұрын
0.o I need to do this! I was also thinking you could download free graph paper, print it on a transparency, and tape it to your lid so you have a grid for placement.
@jenbrannon9290
@jenbrannon9290 7 жыл бұрын
J. Adams that’s an excellent idea!
@denben8530
@denben8530 Жыл бұрын
where do you get the box thanks
@Jenny-xe1ms
@Jenny-xe1ms Жыл бұрын
Overhang edge a lip to lift
@bentleyb9933
@bentleyb9933 10 ай бұрын
Awesome!!
@tasst2674
@tasst2674 5 жыл бұрын
Love it! Many thanks!
@barbaramaroney1561
@barbaramaroney1561 7 жыл бұрын
Excellent job. Making one :)
@jenbrannon9290
@jenbrannon9290 7 жыл бұрын
Barbara Maroney, thanks!!! Let me know how it turns out!
@barbaramaroney1561
@barbaramaroney1561 7 жыл бұрын
I sure will. You just have the best idea's. I wanted one to but the $$$ cost was crazy lol.
@barbaramaroney1561
@barbaramaroney1561 7 жыл бұрын
It came out excellent. I added a few of my own touches and i love it !!!! thanks so much for the idea :)
@jenbrannon9290
@jenbrannon9290 7 жыл бұрын
Excellent!! So glad to hear it!
@Linda.Swierczynski
@Linda.Swierczynski 4 жыл бұрын
@@barbaramaroney1561 Hello, I was wondering, what were some of your own touches?
@reginahay5211
@reginahay5211 7 жыл бұрын
I've just spent (wasted?) a day watching DIY videos of how to do this. Yours is the best. So good I subscribed to your channel. I think the only thing I will do differently is the clear lid. I think I will use a standing frame from the Dollar Tree and use the stand part as a handle to add leverage. Also this will allow a thickness to drill holes for the hinges. Good job!
@eileenmoore7725
@eileenmoore7725 7 жыл бұрын
That is awesome!
@terriwinborn5189
@terriwinborn5189 6 жыл бұрын
Thank you, love it!
@tracilord4854
@tracilord4854 6 жыл бұрын
So smart!
@edwinafox7119
@edwinafox7119 7 жыл бұрын
I couldn't find the case at Hobby Lobby. Do you know where else you can get one.
@sylviaramos2977
@sylviaramos2977 7 жыл бұрын
Great great job thank u so much 4 saving me a chunk of $ lol.😉 love it
@deedless77
@deedless77 7 жыл бұрын
Just an idea too. you could add duct tape to the pieces inside make a tab and double it over so it isn't sticky, and make it so it hangs out of the box in different ares for each layer, so that yoou can remove the items easier when switching it to your needs
@pamwaldron2566
@pamwaldron2566 5 жыл бұрын
Or glue folded ribbon tabs to the backs of the chipboard, foam and magnet sheets. They'll last longer than the tape tabs.
@navybubbles1
@navybubbles1 6 жыл бұрын
😀😀😀😀 excellent
@kathybury6806
@kathybury6806 7 жыл бұрын
we don't have a hobby lobby in Australia. i would have paid you to make me one but it will cost too much to post. what a shame 😥
@jenbrannon9290
@jenbrannon9290 7 жыл бұрын
Kathy Bury maybe you can find something similar in your local hobby or craft store. Or maybe even a big box store would have one. You just need anything with hinges. And I've seen the plexiglass in the framing section as well. It is labeled "replacement" for the glass part if a picture frame. Good luck!
@bettyehayden2392
@bettyehayden2392 6 жыл бұрын
Put duck tape around rough edges.
@pamwaldron2566
@pamwaldron2566 5 жыл бұрын
Or use fine sandpaper and sand the rough edges smooth.
DIY StampeRor stamp positioning folder
7:23
BarbaraMichelle
Рет қаралды 62 М.
Setting Up Your Grip Mat In Your MISTI
4:36
carissawiley
Рет қаралды 6 М.
1% vs 100% #beatbox #tiktok
01:10
BeatboxJCOP
Рет қаралды 67 МЛН
It’s all not real
00:15
V.A. show / Магика
Рет қаралды 20 МЛН
VIP ACCESS
00:47
Natan por Aí
Рет қаралды 30 МЛН
Гениальное изобретение из обычного стаканчика!
00:31
Лютая физика | Олимпиадная физика
Рет қаралды 4,8 МЛН
DIY "Chuckie Tool" Stamp Platform Pressure Tool
8:35
Lolly Palooza
Рет қаралды 26 М.
New MISTI Stamp Tool + Hacks
27:35
Jennifer McGuire Ink
Рет қаралды 185 М.
How to make your own Stamp Positioning Tool
16:01
The Creativity Cave
Рет қаралды 23 М.
Simple DIY Stamping Tool
11:01
Ilda Dias
Рет қаралды 55 М.
😭 HEARTBROKEN! 😭 The Best Stamping Platform On The Market Is Going Away!
25:25
Handmake With Love with Anna Helman
Рет қаралды 108 М.
Make your own STAMPS! (Plus DIY rubber recipe!) | DIY Custom Rubber Stamps
16:05
The Crafsman Steady Craftin
Рет қаралды 262 М.
DIY Stamp Positioning tool
13:54
Back2BasicsMom PLJ
Рет қаралды 20 М.
How to make a Stamping tool/ platform (Cheap and Easy to make )😊
6:33
1% vs 100% #beatbox #tiktok
01:10
BeatboxJCOP
Рет қаралды 67 МЛН