DIY Multiple 18650 Li-ion Battery Charger

[@mpk_666]

Clean device. If this had an usb out module to use like a power bank in a pinch this would be ultimate.

[@zolkazoombalambooska8901]

PLEASE PLEASE PLEASE, UPLOAD YOUR VIDEOS WITHOUT BACKGROUND MUSIC. IT LOOKS VERY SATISFYING WITHOUT CONSTANTLY PLAYING MUSIC. WHEN U UPLOAD VIDEOS WITHOUT MUSIC, YOU MAKE IT GOLDMINE OF VIEWS.

[@RobertBranch-FL]

I stop watching when the music kicks in even when I'm really interested in the content.

[@1988dgs]

There is this thing called the volume control, if you don’t like the music just switch it off instead of asking op to ruin it for everyone else

[@MrNicetux]

@@1988dgs exactly 👍

[@ErCanEverything]

Some like soft music some don't. Music volume is set to 20% And video volume is 200%

[@charliebowen4232]

Please just turn your sound down!

[@kolëk22]

Очень аккуратно и красиво сделано👏👍,хочу тоже такому научиться 😔🤩

[@CMCdiy]

interesting, I will try to make one myself.

[@sergiovillanueva5867]

i have a lot of 20 tp4056 charge module, i like to do something like your idea to charge and recicle 18650 laptop battery, thanks for sharing very usefull ideas

[@ErCanEverything]

I'm glad you liked it

[@ashscott6068]

Cool. So you got 3 spare USB-C sockets! That means it will take 4 days instead of one for them all to break!

[@InFAMOUSPS4_19]

Really cool! Not far off from being able to get it tested to 62368

[@TalismancerM]

You were getting an overall current of ~2.5A when each of those should be 1A x 4 = 4A...was that beefy power supply not quite up to it? or the cable? A great way of putting together a small charging station for cheap!

[@electronic7979]

Her zaman ihtiyaç duyulan kullanışlı bir şarj cihazı. 👍👍

[@ErCanEverything]

Beğenmene sevindim Dostum🙂🤝

[@fawlesssmartspiderman2437]

Nice vid man

[@ErCanEverything]

Thank you🙂🤝

[@sddiymakeitworthit7512]

Excellent job 👍

[@ErCanEverything]

Thank you my Friend🙂🤝

[@alexjorg2740]

Great projects! What kind of glue and spray do you use? Well thank you.

[@FixitEasyDIY]

Great idea. I was thinking to make such thing from wood, but your looks amazing 😍

[@ErCanEverything]

Very useful but the idea was from @DjaniAgain I needed one, but for the future I will make a bigger one with an external charger Thank you my Friend🙂🤝

[@HandmadeCreativeChannel]

Great job, amazing project 👍🏿🍀☺️

[@ErCanEverything]

Thank you my Friend🙂🤝🤝🤝

[@Tugitu]

Mate is there anything you can't do, you are amazing 👏👏👏

[@ErCanEverything]

Thank you my Friend🙂 I needed one, but for the future I will make a bigger one with an external charger🤔

[@aamir8630]

Then what about scientist

[@DjaniAgain]

WOW, this is so compact and useful 😍 Great skills! ✌️ Keep sharing awesome ideas with us Brother!

[@ErCanEverything]

Indeed it is and Thank you for the idea Brother🙂🤝🤝🤝

[@nadimfetaih3841]

Can you share the 3d file you used for the battery holder?

[@jtlusco]

Do you have the STL for the holder?

[@cristicristea4272]

I would also need the STL file

[@saimon1409]

Super!

[@sezmoon]

Next video: DIY Tesla car

[@ErCanEverything]

😄😄😄

[@carlnikolov]

Where is the 3D print file?

[@nikolagsi]

I wanted to subscribe but... I'm already subcribed! Good ideas! Its good to put link to STL file with every build. :)

[@ErCanEverything]

You can download from here👇 www.thingiverse.com/thing:3841876

[@worksofhasan]

great. i made one few months ago.

[@ErCanEverything]

Thank you🙂

[@myhomelab]

nonscence! if u used only one module its also can charge all battries with 1ampare if you want to charge with 2A used tp 5100.

[@ramazanzeynalov973]

Hey dostum el işin çook güzel❤ 3d print dosyasını ata bilirmisin

[@O_Chilavert]

Please can you paste the link to download the 3D file?

[@vanh5688]

Твой ролик достойный внимания

[@ErCanEverything]

Thank you very much🙂🤝

[@mikeb6389]

Nice

[@shanthade]

Please give me the link to buy battery pack with the module slot same that you used. Thank you .

[@alituncel5503]

Ercan öncelikle harika paylaşımların için çok teşekkür ederim. Bu şarj modülünün satışını yapıyor musun? Veya 3D için çizimini alabilir miyiz? Teşekkür ederim. Ellerine sağlık...

[@cjones4433]

Do you have the stl file to share for the 3d printing?

[@mbk1251]

IT OK IF BY CHANCE ALSO HAVE A 3D PRINTERS MASHINE LAYING TOO GOOD TO SEE USB-C USED 4 A CHANGE excellent

[@sergiovillanueva5867]

im a new suscriber, well done, 3d printer very usefull, how much do you spen for it?, thanks in advance, greetins from mexico

[@ErCanEverything]

Thank you for subscribing to my channel.🙏🙂🤝 So 1kg of filament costs around $20 this weighs around 50-60g and will cost around $1 to make.

[@TaiwanEvan]

請問，為什麼要另外放3個板？只使用1個板不行嗎？

[@ТехноФікс]

Це дуже класна ідея 👍👍👍

[@ErCanEverything]

I'm glad you liked it🙂🤝🤝🤝

[@王建誠-p1r]

可以跟你購買嗎？謝謝你。

[@jaybalbuena5045]

did you made those battery holder?

[@damichl9684]

where is the stl file from? Do you have a download link for us :)

[@ErCanEverything]

www.thingiverse.com/thing:3841876

[@GumbaMS]

Would you share the 3d model of the battery holder?

[@davidmeale9572]

Just buy or already made .

[@kmwadi]

Can you have the module of the 3D printer

[@alexnightflydance]

Danke , aber heisst das es bekommt den Strom von 5V/2A Handyloader? Währe ja auch das was da ab zu lesen. DANKE

[@SmartDevX]

can you make it series output?

[@ErCanEverything]

I think it can't because their inputs are connected in parallel and that will prevent the outputs from being connected in series.

[@SmartDevX]

@@ErCanEverything ya, um trying to make it, I damaged 4 Boards... LOL... I think it can be create with bridge rectifier... what you think? I didn't tried yet.

[@istvanbacs2852]

Super

[@ErCanEverything]

Thank you🙂

[@johnedwards315]

sorry but very little practical use. it will take forever (4x) with a regular 2amp charger to charge. 18650 are not ment to be fast charged For it to work you need to use 4x charger (amps) and a bus bar to have a steady current. Dealing with the same issues with my solar set up in my off grid caravan. Ended up using a 4usb splitter with 8 amps and 4 cables. For me it was problem solved. Ty

[@ErCanEverything]

You are right and that is why I did for 4 batteries. otherwise, if I make it bigger, for example 10x, I will use a laptop charger with a regulator

[@DroneSurf]

By using a trigger board let say 9-12-15-20V will charge at high speed?

[@swarnavarakshit5463]

Is that red wire connected in series or parallel ???

[@ErCanEverything]

All modules are connected in parallel, otherwise they will not work.

[@В.Союшка]

Спасибо за видео, а есть проект для печати на 3D принтере корпуса?

[@ChornChanvisal-qc7re]

If that 3D printer? May i have the link for 3D printer please

[@kaushalpanchal1465]

Where can I get that stl file of charger

[@ErCanEverything]

You can download from here👉 www.thingiverse.com/thing:3841876

[@BadBoys_Channel]

where can i buy the battery holder,Can you provide a link to buy a battery holder?

[@ALRS-r5u]

Можешь дать ссылку на 3д модель холдера?

[@ErCanEverything]

You can download from here👇 www.thingiverse.com/thing:3841876

[@kamarulkari909]

Hi, anybody please tell me. What is the difference between 4 batteries using 1 charging board and 4 batteries using 4 charging boards? Is there an advantage?

[@ErCanEverything]

You cannot connect a fully discharged battery with a fully charged one! And that's why I use 4 modules with 1 charger, each module is responsible for its own battery and their charging current is limited to 1A.

[@ollie9916]

@@ErCanEverything how many hours i must keep the batteries in charger?

[@asdman384]

Will it work if I connect two or more chargers in another port?

[@ErCanEverything]

It should work but I haven't tried it🤔

[@gamingCAREER101]

Next video please put the materials in comment section

[@niwrad84]

I was looking for the exact battery holder but I realised it was 3d printed 😅

[@krisferr21]

Where can I buy the container for put battery,let me know pls

[@ErCanEverything]

I printed this on a 3D printer🙂

[@krisferr21]

@@ErCanEverything ohhh,I need to this…. Thanks for the answer

[@riteshsinha5900]

I have not much knowledge but you soldered P+ and B+ together?

[@user-MyMaster]

on this modul p+ and b+ = 1 place but not p- and b-

[@orlatris96]

Congratulations, perfect job. Could you please provide me with the support file. I'll be thankful. greetings and continuation of beautiful projects. thanks

[@kimohassan2010]

The chipset which the charger is connected to getting very hot, its temperature reached over 45 C then i turned it off before it burns

[@govind3170]

What about reverse polarity protection for circuit

[@생각하는나무-u4j]

Where can I get the 18650 3D printer firmware? Please provide information.

[@karolbuda]

Nice, can you share STL file ?

[@ErCanEverything]

You can download from here👉 www.thingiverse.com/thing:3841876

[@Edmorbus]

Can you share the 3D Files

[@LeslieIsgrigg]

Great job, but your links leave out the foundation of the project, the holder. If it is from a CAD system and 3D printed, can you also provide the files ? A lot of us do not have CAD software or a 3D printer, we do those who could print the holder for us. Lat thing, could lower the background music volume some, it gets distracting.

[@ErCanEverything]

You can download from here👉 www.thingiverse.com/thing:3841876

[@Edmorbus]

@@ErCanEverything Thanks

[@Tesito2010]

Wo bekommt man die Datei für den 3d druck

[@ErCanEverything]

You can download from here👉 www.thingiverse.com/thing:3841876

[@slimeedude]

what if you put the battery in reverse polarity?

[@FLomasterZ]

Why it is working in parallel mode? Wtf. Which power sources do you use?

[@deepakkaithwas9785]

Please add Gerber file link too I have to make this pleas

[@ErCanEverything]

You can download from here👉 www.thingiverse.com/thing:3841876

[@deepakkaithwas9785]

@@ErCanEverything thankyou

[@MrNams]

Could you please share stl file?

[@kesezro]

What if my module isn't working. Diode do not change and battery isn't charging too. I conected everthing same as you, still doesnt work.

[@faturrachman5264]

Box battery buy link?

[@naminhhoang9156]

cho mình xin thông tin của cái khay giữ pin và mạch

[@kennnnnethchua]

Is it possible to use just one 4056 for two batteries connected (parallel) ?

[@frostyflankz120]

Same question, did you find out?

[@kennnnnethchua]

@@frostyflankz120 It does work. However it heats up a lot. I feel its unsafe long term. I put a small heat sink under the chip to help keep it cool.

[@emres4234]

Merhaba, modülleri paralel bağladığımız zaman tek güç kaynağı ile değilde 4 ayrı güç kaynağını 4 ayrı pile tek tek taksaydık fark olacak mıydı ? 4 pilde tek güç kaynağı ile 4 ayrı güç kaynağı eşit güçte mi akım çekecekti ?

[@Elektrikleyasam]

Merhaba hocam aynı devreyi yaptım hatta 32 li yaptım paralel bağlamadan ayrı güç kaynağı da kullanabilirsiniz ama paralel bağladığınız zaman güçlü bir güç kaynağına ihtiyaç duyarsınız. Ben 32 li sistem için 5v 60 amper güç kaynağı kullandım.

[@PocoF3TechDot]

Why not just one module?

[@mrsuffiplayz]

Plz name batay jo jo chezen ap ne use ki hen

[@ErCanEverything]

I don't understand what you're writing🤷

[@DoK_ToP]

Можно ссылку на STL?

[@ErCanEverything]

You can download from here👉 www.thingiverse.com/thing:3841876

[@cvofficialchannel2497]

Ali express se saman to india me ship nahi ho raha hai to aap ne kese mangvaya , please reply

[@ErCanEverything]

I can't translate what you write🤷

[@cvofficialchannel2497]

​@@ErCanEverything Same from AliExpress which is not shipping in India so how did you order please reply

[@cvofficialchannel2497]

​@@ErCanEverything Please reply

[@ErCanEverything]

Search for other options by typing TP4056

[@jaybalbuena5045]

how many hours does the battery needs to be fully charged by tp4056?

[@user-MyMaster]

around 3

[@user-vc1pj8el4j]

2:33 What this glue?

[@Edmorbus]

Glue with activator for fast dry

[@ErCanEverything]

www.google.com/url?sa=t&source=web&rct=j&url=www.emag.bg/momentno-lepilo-za-mdf-mitre-apel-100gr-400ml-dvukomponentno-19693/pd/DWYB7LBBM/&ved=2ahUKEwiOysaXna37AhWn7rsIHSPYDPoQjjh6BAgYEAE&usg=AOvVaw3dLiblFszWLsx0YdWseVOQ

[@user-vc1pj8el4j]

@@ErCanEverything It is not possible to order from this site to my country. Dear author, can I ask you for an analogue from the aliexpress website please? drop the link please

[@ErCanEverything]

@@user-vc1pj8el4j Try this site: www.bangood.com

[@vukristic]

i made this few days ago

[@vukristic]

but i dont have 3d printer so i sticked it on piece of wood

[@ErCanEverything]

Well done🙌 This is very nice, people need to know their abilities. And I made this with my hands before I had a 3D printer🙂 kzbin.info/www/bejne/sGSll6ynbcage6c

[@vukristic]

@@ErCanEverything great :)

[@vukristic]

@@ErCanEverything also i made this with four 18650 battery connectors, and next to that are some other connectors for different batteries

[@mikeb6389]

But, needs Fail Safe BMS.

[@movieplus4692]

Can i buy from you ? Pls give me link !!!

[@pltspemula]

👍

[@carlosjuliom]

3d design please

[@valzzu]

Why 4 modules?

[@ErCanEverything]

So that they charge faster and the batteries are independent of each other. Each module is limited to 1A and with 1 module it would charge much slower

[@valzzu]

@@ErCanEverything dumb me i forgor that 😅

[@iffee100]

there is no link to this battery holder. From where to get it???

[@user-MyMaster]

maybe 3d print?

[@GumbaMS]

@@user-MyMasteryou have a link to the model?

[@ikarone3]

Can you post stl file please ?😊

[@Wertalet1992]

можно файлик stl для печати?

[@alive_home]

STL ?

[@ErCanEverything]

You can download from here👉 www.thingiverse.com/thing:3841876

[@alive_home]

@@ErCanEverything thank you

[@samratnath130]

Need STL file please send link

[@ErCanEverything]

www.thingiverse.com/thing:3841876

[@aliahmed-is1vp]

Браво братле правиш много яки неща 👏👏 ellerine sağlık kardeşim nazar deymesin 👏🧿

[@ErCanEverything]

Teşekkür ederim Dostum🙂🤝🤝🤝

[@manishabadhe6525]

Sir can you give me 3Dmodule

[@ErCanEverything]

www.thingiverse.com/thing:3841876

[@manishabadhe6525]

Thanks bro

[@papsnil]

stl file pls

[@5b4aezmarinoscyprus71]

2:20 What you are using for CA-glue accelerator...

[@akashdeeplakra3583]

Time

[@akashdeeplakra3583]

A generous amount😂

[@5b4aezmarinoscyprus71]

@@akashdeeplakra3583 🤔🤔

[@donancantv3801]

Türk müsün?

[@ErCanEverything]

Evet Türküm Dostum🙂

[@donancantv3801]

@@ErCanEverything yeni keşfettim seni yolun açık olsun takipteyim :)

[@ErCanEverything]

Desteğin için teşekkür ederim Dostum, Allah razı olsun🙏🙂❤️🤝

[@vocsidientu]

For me file 3D printer, pls 😢

[@Wholam53]

O . give me your address

[@cvofficialchannel2497]

Please reply

[@DollarJonny]

+

[@Makedonskiy-]

🇺🇦👀👏👏👏❤👍🏆

[@Chakram_sivaji]

What is the device name at 3.47 minutes you connected to that battery