Diy NamePlate Earrings

Learn how to make your very own nameplate earrings using only cardstock and mod podge!!
Be sure to follow my other pages!
/ teaseaccessoryboutique
/ teaseaccessoryboutique
www.teaseacces...
Supplies:
Epoxy, E6000 Glue, and Mod Podge can be purchased at your local craft store or www.michaels.com
Earrings were purchased at a local beauty supply but can also be found on www.amazon.com

[@tishjohnson8226]

Card stock? OMG pure talent!!!

[@RayniaTABou]

Tish Johnson 🥰 Thank you soo much!!

[@carriefavo3417]

Love your creativity.!! Keep the videos coming.

[@RayniaTABou]

CARRIE Fav-Major omg!! Thank you soooo much for watching!!

[@hotmesscraftingtime9147]

I followed your tutorial and I realized I didnt like using the cardstock for the name and used orcal 651 for the name. Still used cardstock for the offset. It turned out really good and when transferring the vinyl it didn't rip the card stock

[@RayniaTABou]

Paige Jones hey there!! Thank you so much for watching!! I’m glad to hear you found a method suitable for you! Sounds amazing!!! Happy crafting🤗

[@slimmas4485]

Can you explain the process please?

[@maximiliankase963]

i know it is pretty off topic but do anybody know a good place to watch new series online ?

[@adonislochlan7090]

@Maximilian Kase flixportal xD

[@maximiliankase963]

@Adonis Lochlan Thanks, I went there and it seems like a nice service =) Appreciate it !

[@msstewart326]

Beautiful!!!

[@Twinnytwin11]

Finally a great step by step! Love it!

[@RayniaTABou]

Thank you Sooo much🥰

[@paulapernell3898]

Thanks for sharing, very easy to follow, I will be trying these soon! Keep up the great designs!

[@RayniaTABou]

Paula Pernell awww!! Thanks soo much for watching!

[@couturecreations8670]

Awesome job! Thanks for sharing

[@RayniaTABou]

Couture Creations thank you!! And you are very welcome!

[@Badgirl4life773]

You are a good teacher!

[@RayniaTABou]

Badgirl4life773 awww thanks so much for watching🤗

[@lovelyrich54]

Love it, love it, and did I say I looove it! You rock sis😉

[@RayniaTABou]

Lovely Rich Thank you sooo much for watching and thanks for the love🤗

[@lovelyrich54]

@@RayniaTABou Your so welcome sis!

[@Demita34]

🥰😍love them ... I can’t wait to make a pair ! How do I share my pictures with you?

[@RayniaTABou]

Demita34 hey there!! Thanks for watching! You can share your pic by tagging me on fb or insta or messaging me on either... my socials are in the description box!!! I can’t wait to see🤗

[@mrsovwatson]

Evening thanks for the tutorial wonderful job. Are you doing anything to prevent the earrings from changing?

[@RayniaTABou]

I always coat my costume jewelry with clear polish...

[@diamondzcreations4U]

@@RayniaTABou how many coats do you add?

[@RayniaTABou]

Shioban Reyes hey there! Thanks for watching! I only use one coat of clear polish, that’s plenty

[@diamondzcreations4U]

@@RayniaTABou thank you sweetie

[@creationsbyelaina8183]

Dopeness!! Great tutorial!😉

[@RayniaTABou]

Creations By Elaina hey there! Thanks so much for watching!

[@martiegouws5950]

I love this!!!!!!!!

[@RayniaTABou]

martie gouws hey there! Thanks so much for watching🤗

[@shontaebarron8359]

Love it!!!! Thanks for sharing!!!!

[@RayniaTABou]

Shontae Barron Thanks soo much for watching!

[@KittieMonroeMUA]

New Fan here & i love this!

[@RayniaTABou]

Ms.Kittie Monroe Hey there!! Thanks so much for watching!!! 🤗

[@bignicks124]

Hi great video. I would like to make these but have a question. What size font are both pieces supppsed to be? The front and back of the name

[@RayniaTABou]

Shaniqua White Thank you! I honestly don’t remember the size of the back pieces... I just made offsets of the letters, the biggest piece is set at an offset of 0.08 and the 6 layers are set at an offset of 0.06... the actual letters are 1.95x2.42” and all of this was done with my silhouette cameo 2

[@msstewart326]

Can you please do a tutorial on silhouette cameo (3 preferably) to show process. All the ones on KZbin are Circuit.

[@RayniaTABou]

Ms Stewart lol, hey there! Thanks for watching, I can try...

[@cbarbosa328]

Thank you 💕 God bless you

[@RayniaTABou]

Carmen Barbosa hey there! Thanks so much for watching!

[@-cotton-bri-]

Can you use UV resin in place of the epoxy?

[@alisiadupree7778]

So cute

[@RayniaTABou]

Alisia Dupree thanks sooo much!! Be sure to subscribe

[@LadyTsThingsThatBling]

Great tutorial. New subbie.

[@poshblu2884]

Thanks for the tutorial! 😊

[@RayniaTABou]

POSH blu you are very welcome!

[@MsKinkyhappyus]

Awesome !

[@tandekadavenport6685]

What are the measurements for th names and what font

[@RayniaTABou]

Tandeka Davenport 1.95”x2.42”

[@lifewithtashabae4846]

Hey thanks for this tutorial...what does the epoxy do? And is it mandatory that I use it ?

[@RayniaTABou]

Life with Tasha hey!! thanks for watching! Epoxy just gives the cardstock that extra protection and sturdiness but you can definitely get by with using it!

[@lifewithtashabae4846]

@@RayniaTABou well thanks and again I truly appreciate this video!

[@diamondzcreations4U]

Thank you so much for this video, it inspired me to make jewelry for my girls

[@RayniaTABou]

Hey there!! Thanks so much for watching! Your girls will love it! I know mine do!! 🤗

[@diamondzcreations4U]

Can you please suggest the best resin to use, I'm using the Art resin because I read it was better for in home use but I think it cures too soft. And can you show me the back of some of your pieces please. TIA

[@RayniaTABou]

Shioban Reyes hey! I’d be happy to show you some more pics... find and message me on Instagram @rayniatabou

[@cnaresourcecenter4256]

Thankyou !

[@RayniaTABou]

CNA Resource Center hey there! Thanks for watching!! 🤗

[@kimberlyanderson7357]

New sub love love it

[@RayniaTABou]

Kimberly Anderson Hey there! thank you so much for watching!!🤗

[@octaviachadwick2553]

How do I print the letters on the card stock if I don't have a crucit cutter and cut with scissors?

[@RayniaTABou]

Octavia Chadwick hey there! Thanks so much for watching! I suppose you could just type it in word with whatever u want, and just print and cut!

[@alexisfigueroa9896]

What type of glitter paper do you use the cardstock leave a white lining I don't like please help !

[@RayniaTABou]

Hey there! Thanks for watching. I use the recollections brand cardstock... you can always us a little acrylic paint to cover the white paper part too if it becomes too noticeable. Hope this helps🤗

[@teresajones6525]

Great video. How long will earrings like this last?

[@RayniaTABou]

Thank you! We are still testing that question, lol... no problems yet!

[@ebonyrichardson2522]

Cute!!

[@RayniaTABou]

ebony richardson thanks sooo much!

[@ginniepickett6812]

Great video and love the earrings.

[@RayniaTABou]

Ginnie Pickett Thank You Sooooo Much!! 🥰

[@alchemicalhighpriestess.th3333]

Thank you 🙏🏽

[@RayniaTABou]

Alchemical High Priestess. Tha Hood Oracle 1027 hey there! Thanks for watching!

[@ad5365]

loveeee thanks !!

[@RayniaTABou]

A D thanks so much for watching!!

[@rachelnoffsinger8607]

How many layers of the offset?

[@daradarabrown4654]

Hey wonderful tutorial can i use any type of card stock or this brand is the best?

[@RayniaTABou]

DaraDara Brown Thank you for watching!! And I use any cardstock for now, I haven’t had any problems yet...

[@latoyastephens7605]

I'm loving the project. My questions are, what are the measurements for the letters, and since I do not have a cutting machine, what are the suggestions for other options, like what pre cut letters to buy and trace. I really want to try this. But I don't have enough info. Please advise.

[@RayniaTABou]

LaToya Quinney 1.95”x2.42” and I mentioned you could print the word or name out on card stock and cut around it using scissors... precut letters may work! And thank you sooo much for watching!! Be sure to subscribe 🤗

[@latoyastephens7605]

@@RayniaTABou thanks and ok

[@user-yl4rh8vn8c]

Nobody can give you measurements for names because each name is a different length. Your earrings may differ. Do some of your own research.

[@monique4623]

Did you a circuit to cut the names out

[@RayniaTABou]

dashalone ross hey there! Thanks for watching! I have a silhouette cameo

[@keever504kw]

What kind of epoxy did you use

[@RayniaTABou]

Hey there!! Thanks for watching! Envirotex lite...

[@PowerNpurpose]

Great vid thx💯💖

[@RayniaTABou]

YEAH* I *SAID IT hey there! Thanks for watching!!!! 🥰🥰

[@doseofparis_]

Hello! Great tutorial hun. I am interested in doing custom bamboo earrings. I was wondering how you got the name cut out?

[@RayniaTABou]

Dose Of Paris hey there! Thanks for watching! I cut the name using my silhouette cameo...

[@doseofparis_]

@@RayniaTABou Is there a class you had to take to learn? I've been looking on KZbin but nothing shows everything in detail

[@RayniaTABou]

Dose Of Paris unfortunately, I don’t know of any classes. It’s just the basics though, type a word using the text button, pick a font, and cut on settings according to your software...

[@dymangirl88]

Raynia is there a video to show how to design it and creat the shadow

[@RayniaTABou]

dymangirl88 hey there! Thanks for watching! I don’t have one but if you follow this Facebook group called “The Bamboo Hustlers” you will get so many tutorials and videos and tips on these very earrings.

[@dymangirl88]

Hey I figured it out. I am actually in that group🤗

[@tamikasmith6041]

Thank you for this! Did you epoxy the back as well?

[@RayniaTABou]

Tamika Smith hey there! Thanks for watching, I do epoxy the back with just the thinnest layer...

[@kedastumblerswaters9715]

Do you have to use a diff brush each time if not how to unheeded brush?

[@RayniaTABou]

Bruce&Keda Waters hey there! Thanks for watching! I use a brush for the mod podge and a separate brush for epoxy... they are just the cheapest little brushes, I believe I paid $1.50 for a pack of 100!

[@CreationsByKiaa]

Cute

[@RayniaTABou]

Colorful Kia Thank you! Be sure to subscribe!!

[@teshianesbit6420]

Do you do the letters smaller on top like the blue is smaller than the black?

[@RayniaTABou]

Yes, the black is an offset of the blue letters...

[@face909]

Thank You soo Much I have been waiting for someone to share the love !!

[@RayniaTABou]

You are sooo very welcome! Thanks for watching!!

[@face909]

@@RayniaTABou I have a question, are all of the offset layers the same size and the top layer regular?

[@RayniaTABou]

ashia barnes yes, the 6 black layers are the same size, meant to outline the original size of the blue name..

[@face909]

@@RayniaTABou thank you

[@RayniaTABou]

ashia barnes anytime!

[@ksquad2279]

How do you create the offset piece?

[@RayniaTABou]

I just use the offset setting on my silhouette design space, the very last piece is set to 0.08 and the middle pieces are set to 0.06...

[@ksquad2279]

@@RayniaTABou I have a cricut smh I need help lol

[@RayniaTABou]

Join some cricut fb groups, my silhouette groups are such a big help for me!

[@redblackgreen3371]

K Squad You can download the silhouette software for free... make your design in it.... TURN YOUR DESIGN ALL BLACK.....then insert a WHITE SQUARE and place your design on top of the white square. Use your Microsoft SNIPPING TOOL to copy your design and save it to your desk top. Open up your Cricut software and upload your newly created design.. you know what to do from there. FYI. This technique Works for any design you want to get “inspiration” from.

[@redblackgreen3371]

Thank you... great job... I’m wondering if foam can reduce the 6 layers🤔hmm

[@DoctorFashion]

the angle that this was filmed is killing my neck lawwwwd.......

[@RayniaTABou]

Doctor Fashion hey there! Thanks for watching! My very first KZbin video ever... 😂😂

[@DoctorFashion]

RayniaTABou aww ok ! You get a pass ahah 💛❤️

[@RayniaTABou]

😂😂

[@lelemarie6125]

@@RayniaTABou the angle is fine. I saw everything clearly which is all that matters. You can't please everyone 🤷🏽‍♀️

[@TheRealTinaMaria]

I just subcribed

[@RayniaTABou]

Tina Willis hey there!! Thanks so much🤗

[@moneysworld7459]

What kind of paper are you using for the blue letters

[@RayniaTABou]

Hey there! Thanks for watching! I used Recollections glitter cardstock from Michaels craft store.

[@rashedarobinson9796]

What setting do you cut the card stock on? I cannot get it right to save my life. ): I've tried EVERYTHING.

[@RayniaTABou]

Rasheda Robinson hey there! Thanks for watching🤗 I use silhouette cameo so I use the glitter cardstock setting which is 2 passes with a 6 blade and about force 33 and speed 3, hope this helps

[@rashedarobinson9796]

Thank you so much. I appreciate your help

[@KustumKreatedKrafts]

Yasss thank you!!! Lol

[@RayniaTABou]

Hey there! Thanks for watching!

[@lj8307]

What type of cardstock did you use for the back?

[@RayniaTABou]

L J hey there! Thanks for watching! I used glitter cardstock for the entire thing... I think it’s by recollections or Martha Stewart...

[@msstewart326]

What would be the best font

[@RayniaTABou]

Ms Stewart I usually use the “Honeybe” font from dafont...

[@ms.d6857]

Where do you purchase your earrings from? TIA

[@RayniaTABou]

Diane Briggs hey there! Thanks for watching! I get them all over! The local hair stores, online, some department stores in my area, Walmart... it really varies.

[@ladyloveslocs623]

Hi. What size (diameter) earrings did you use?

[@RayniaTABou]

Hello! These particular earrings are 3 in diameter

[@ShereeShontae]

What font did you use

[@RayniaTABou]

Sheree Gillard I believe it’s called “honeybee”

[@danastiggersramsey3492]

Do you have to cut 6 layers of the glittered stock? Does it make a difference in the final product? Can the 6 layers be 5 regular blue and the top in glitter?

[@RayniaTABou]

Hey there! Thanks for watching, you can cut however many layers you desire... you can stack em before mod podging so you can kinda get a feel for the thickness you want, and if you want just one layer on top, that’s fine too! It’s all personal preference, hope this helps!!

[@laronyafinn7]

Hi, are they for aell & how much?

[@RayniaTABou]

LaRonya McGlothin hey there! Thanks for watching! And I do take orders for them through my Facebook and Instagram accounts...

[@Msrolanda]

What font did you use?

[@RayniaTABou]

Rolanda Stone hey there! Thanks for watching. It’s from dafont.com and it’s called Honeybe.

[@gamingmaster9554]

If you have a maker, can yo use a a thicker cardstock so that you don't have to do multiple cuts and then put them together?

[@RayniaTABou]

gaming master hey there! Thanks for watching! I’m not familiar with a maker as I’m totally loyal to my silhouette 😂 I am in a fb group called The Bamboo Hustlers, join that group and I know there are several with cricut a who could answer your questions!!

[@ladyjcreates22]

What is your size for the earrings

[@RayniaTABou]

Hi! Thanks for watching!! 1.95”x 2.42” for the earrings, I believe the earrings are 3 inches

[@tigeabenton2174]

This doesn't look like Cardstock at all. Great work!!! I'm sorry but that other lady has nothing on you.

[@RayniaTABou]

Tigea Benton 😱😱😱 Thank you sooo much!!

[@deedeephillips5216]

What font is this ?

[@RayniaTABou]

Deedee Phillips hey there! Thanks for watching! It’s called “honeybe” font from dafont.com

[@tinyscreations]

Good evening. Did you epoxy the back once the front was dry?

[@RayniaTABou]

Tinys Creations hey there! Thanks for watching!! I didn’t on this pair, but I started doing it to protect the entire earring from moisture after while...

[@monique4623]

Hello just want to clarify but you made the name on design space and printed it out on cardstock?

[@RayniaTABou]

dashalone ross hey there!! Thanks for watching!! And yes! I used a font called “honeybe” and just cut it out on my silhouette

[@monique4623]

@@RayniaTABou Thank you

[@franchiseplaya75]

Can you tell me the size of your image?

[@RayniaTABou]

franchiseplaya75 hey there! Thanks for watching! I believe the entire image is 1.5” x 3”, hope this helps

[@franchiseplaya75]

RayniaTABou thank you. I tried doing this last night but my cameo kept eating up the paper so I have to figure that out

[@RayniaTABou]

franchiseplaya75 awww, yes it’s just a trial and error process...

[@bignicks124]

Hi can you tell me the measurement of the nameplate in this video? It looks nice and big. Thats the size i want mine

[@RayniaTABou]

Shaniqua White Thanks for watching!!! The biggest offset piece is set at 0.08 and the 6 layers in between are set at 0.06, the actual blue name is set at 1.95”x2.42” I believe!

[@bignicks124]

@@RayniaTABou the offset is the backpiece right? The measurements seems small compared to the name

[@RayniaTABou]

Shaniqua White yes. The measurements seem smaller because the offset is just and outline shadow, you just have to play with your machine and figure out your settings...

[@1NikiJo]

Did you have to do this on a pc and then flip the letters and all that? I wanna invest soI can make these.

[@RayniaTABou]

Thanks For Watching!!! And, Yes, I used my design space on my computer for my silhouette cameo!!!

[@MississippiBeauty]

I wonder if I can use my phone a note?

[@RayniaTABou]

Hey there! Thanks for watching! I’ve seen people do it from their iPhone and iPad, let me know if it works from your phone!

[@LuvCiearaNicole]

The lettering is that all cards rock?

[@LuvCiearaNicole]

I Meant Card stock

[@RayniaTABou]

Sweetlyfe With Kaz & Barbee yes! 100% cardstock!

[@LuvCiearaNicole]

@@RayniaTABou how many layers total?

[@RayniaTABou]

Sweetlyfe With Kaz & Barbee 9 layers total!

[@gwenmarie329]

??????

[@RayniaTABou]

Thanks so much for watching... what’s up?

[@gwenmarie329]

@@RayniaTABou I apologize my keyboards wasn't working yesterday but great job 10 thumbs up! ☺

[@gwenmarie329]

Your welcome.

[@kayeseauxs2576]

As DOPE as this is.... I'm so confused lmbo

[@RayniaTABou]

Thanks so much for watching, how can I help?

[@kayeseauxs2576]

The Cut process to get the name pieces

[@RayniaTABou]

Ok, what machine are you using, I have a silhouette cameo

[@pepethepatriot7524]

Your music is way too loud. You need to have your voice louder than the music, not the other way around. *sigh*

[@RayniaTABou]

Hey there! Thanks for watching! Noted.

[@sworley1956]

the music could go. Its hard to concentrate on what you are saying

[@RayniaTABou]

sworley1956 hey there! Thanks so much for watching🤗

[@pamelacherokeeflower4554]

Couldn't hear her good bc of the music.ill just watch another diy

[@RayniaTABou]

Pamela Sunshine Rogers Hey there! Thanks for watching, I will work on that whole loud music thing😎 your feedback is appreciated

[@mariongriffin6805]

What kind of paper are you useing for the back

[@RayniaTABou]

marion griffin hey there! Thanks for watching! I’m using the same 100% cardstock on the whole earring...

[@mariongriffin6805]

Ty