DIY No Sew Faux Leather Combo Wallet Keyring with Tassel

[@lynnlaverack7334]

Just purchased this pattern and can’t wait to start.

[@cutcutecrafts]

Hope you'll enjoy it!

[@TwoBusyCrafting77]

I just purchased these so excited to try them out. I'm even more excited you have KZbin channel lol.. thank you so much. I love your shop will be back for more soon :)

[@cutcutecrafts]

Thank you TwoBusyCrafting :) Happy crafting!

[@allyscraftycreations]

Looks beautiful ❤

[@cutcutecrafts]

Thank you 😊

[@sarahsworld-2240]

This is cute please do bags n it’ll match

[@cutcutecrafts]

Thanks :)

[@gsmith5140]

Love it!

[@owlscraftdelgado3257]

Compre tu file y esta muy bonito gracias por hacer tutoriales de como hacerlo!

[@cutcutecrafts]

Thank you ❤️ glad you found the tutorial useful.

[@rainbowfeathers69layla]

Hi I am in the process of making this faux leather wallet and change purse, but I am struggling with the fastener snaps. Video goes too fast for me and I can't see which parts of the fasteners go where. Thanks! Love your work!

[@cutcutecrafts]

Hi Tammy, you can slow the video speed from the settings gear icon :) I usually put the male half of the button on the flap and the female on the pocket body, but for functionality it really doesn't matter which is where, as long as it closes.

[@natilema3967]

I just love it! I will try this tomorrow. Thank you very much.

[@cutcutecrafts]

Hope you enjoy making it!

[@ndivmakatu]

Do I need a specific plier size. I don't know how many I have bought but failing to snap

[@brendalg4]

How long does it last compared to if it was sewn?

[@soberinked6322]

how well does it hold up with just using the hotglue?

[@cutcutecrafts]

It depends on the glue and the faux leather. If you can sew, that's the best. If you can't sew, but want it durable, there are other glue options too. Check this article cutcutecrafts.com/what-type-of-glue-for-faux-leather-hair-bows/

[@soberinked6322]

@@cutcutecrafts thank you!

[@cindymeldrum8828]

What is the size of the largest piece. Printing the template, all pieces print on 8.5"x11", b.ut when I upload into Cricut, the pieces are larger

[@cutcutecrafts]

App. size unfolded without the closure and hang flap 4x5.5 inches or 103 x 135 mm. Make sure to open the SVG and not the DXF file. The DXF is for Silhouette Studio. Design Space doesn't always read the size in DXF correct.

[@cindymeldrum8828]

@@cutcutecrafts Thank you.

[@cutcutecrafts]

@@cindymeldrum8828 my pleasure!

[@jeanettemcbeath1498]

I find the coin part is too narrow and you would only get 2 x Australian $2 coins in there

[@AnnieSuzie]

Love your wallet. Please can you share the link where you got the pretty keyring and hardware from, thank you.

[@cutcutecrafts]

Thank you :) The keyring and clasp were bought on AliExpress, but I'm sure there is more variety now on Amazon too. Just look for Keyring Clasp.

[@AnnieSuzie]

@@cutcutecrafts ah thanks if you could share the AliExpress link that would be v helpful x

[@cutcutecrafts]

​@@AnnieSuzie www.aliexpress.com/item/32804865304.html?spm=a2g0o.detail.1000060.3.332c29ab38fvFQ&gps-id=pcDetailBottomMoreThisSeller&scm=1007.13339.291025.0&scm_id=1007.13339.291025.0&scm-url=1007.13339.291025.0&pvid=8ed66dba-c916-412c-8e06-ddf51e8d1360&_t=gps-id:pcDetailBottomMoreThisSeller,scm-url:1007.13339.291025.0,pvid:8ed66dba-c916-412c-8e06-ddf51e8d1360,tpp_buckets:668%232846%238107%231934&pdp_ext_f=%7B%22sku_id%22%3A%2210000014777658515%22%2C%22sceneId%22%3A%223339%22%7D&pdp_npi=2%40dis%21EUR%211.9%211.86%21%21%21%21%21%40211b58e916687786045912650e48fd%2110000014777658515%21rec

[@AnnieSuzie]

@@cutcutecrafts Thank you so so much x

[@tierneealton2097]

BEAUTIFUL!!!! 😍

[@cutcutecrafts]

Thank you ❤️

[@connieyoung2729]

How many sheets of faux leather do I need to make one wallet and tassel

[@cutcutecrafts]

It depends on how many prints you want to use, but two should be plenty.

[@latrinasibley4244]

Hello I purchased this SVG and would like to know what are the right measurements ? pleases help

[@cutcutecrafts]

There are dimensions in the description of the templates. Send me a convo on Etsy :)

[@pamsfiberfrenzy]

Where do you get the hardware for your tassel? I have something different.

[@cutcutecrafts]

Usually craft stores, but you can also find different kinds on Amazon. You don't need the exact same hardware. Just make sure the ring has a way to be split or opened

[@laurengrace8518]

Hello! Is the faux leather 2mm thick?

[@cutcutecrafts]

Hey Lauren :) The pearlescent is thick, but not 2 mm. Probably 1 - 1.5 mm and has a fairly fuzzy back. The gold cheetah is much thinner.

[@AP1455.]

I have a maker 3. Do I need a cutting mat to do this project?

[@cutcutecrafts]

Yes, you need to stick the faux leather to a mat to cut it.

[@A347baker]

Can this be done with cotton?

[@cutcutecrafts]

If you want to sew this design, it must be non fray fabric like faux leather or felt. There is 1/4 inch seam/glue allowance, but no allowance for turning inside seams.

[@patriciaabelliveau9607]

Hello, going to purchase template but what faux leather do you recommend for use on Cricut explore 3?

[@cutcutecrafts]

Hey Patricia, I love pebble textured faux leather for the coin purses and wallets. It has textile backing, so it will hold well.

[@patriciaabelliveau9607]

@@cutcutecrafts is it Cricut brand or any pebble will do?

[@cutcutecrafts]

@@patriciaabelliveau9607 any pebble should do. I haven't seen pebble with bad backing so far, so it should be fine.

[@kellylegere6668]

Hi so I just bought this template a few days ago and I was curious. Where did you get the snap tassels and snap pliers from?

[@cutcutecrafts]

Hey Kelly, the snaps are from a set I bought from Amazon and the setting pliers are Vario by Prym/Dritz brand. They come with a variety of setting tools that attach to them and make them perfect for placing eyelets, snap buttons, rivets etc.

[@rackybalboa]

Good evening. May I please know what brand your snap pliers are?

[@cutcutecrafts]

Sure, they're Prym and come in a small suitcase set with variety of different attachments for the different types of snap buttons and eyelets.

[@rackybalboa]

@@cutcutecrafts Thank you very much for letting me know. I just purchased this template yesterday but don't have the tool. I Can't wait to make this. Great video!

[@cutcutecrafts]

@@rackybalboa thank you :) glad you like it! Forgot to mention I use these plies only for metal snaps. If you're going to use the plastic KAM snaps, the pliers are different and you can get a set of snaps with setting tools or pliers on Amazon or in craft stores.

[@andreastewart4215]

I have tried several times watching this video to the end. I never make it I work night shift and the music puts me to sleep.

[@cutcutecrafts]

Stop the music 😜

[@armymommi]

An you add sound to what your doing? The music doesn’t tell me anything.

[@cutcutecrafts]

There are text instructions, that you can pause :)

[@kamilawilliams6431]

cute. but your vid extremely too fast to follow

[@cutcutecrafts]

@Kamila Williams you can slow it down as much as you want. Go to the gear icon on the video and choose the replay speed. Turn the sound off if slowing it 😂

[@loritipton5800]

It'd be amazing if everyone who list all these ideas would understand that not everyone I'd lucky enough to have a cutting machine so maybe you could list another way for anything that uses a cutting machine an alternative way to make anything the post videos like this I normally cut off and sometimes will hit the unsubscribe button when all they do is projects that I have no way off doing . It's kinda useless to keep watching videos I wish I could do but my old man won't get me that . I am a homemaker and don't have any income. I make jewelry and other stuff but no one wants to pay for whT I make they want to to front them stuff they never pay for .

[@cutcutecrafts]

Hey Lori, there are numerous options available to you. For those without machines, there is a printable PDF pattern available. You can cut it with scissors or craft knife and forget about machines :) The pattern is fairly simple and if you can't get the PDF, then you can figure it out by yourself and make your own without need of computer or machine. The video shows all parts and you can easily design your own version of a wallet.