DIY Off-Road Tire Inflator Setup

DIY Off-Road Tire Inflator Setup. On this video we put together our own offroad tire deflator/inflator kit. This ends up being a fun project that anyone can tackle in the garage. I picked up all the parts needed from Amazon and did it all for under $100. I decided to go with a 2 tire inflator system but this can easily be duplicated to have a 4 tire setup. This is going to save me time airing up offroad as well as some welcomed convenience. We had fun testing this with our Smittybilt 5.6cfm air compressor and seeing the time savings. I'll include links below so you guys can do a similar setup for your 4x4 rigs.
✔️Parts Used:
Smittybilt Air Compressor: amzn.to/318Ewu2
Flexzilla Hose: amzn.to/3XlELv0
HD Air Chucks: amzn.to/3CEW801
Couplers: amzn.to/3pg8sAW
House Clamps & Tool: amzn.to/3qJvtMT
Cutters: amzn.to/3qWflrB
Barb Fittings: amzn.to/46hRNOe
Barb T Fittings: amzn.to/3NGzxqu
Mini Ball Valve: amzn.to/42PzpsW
✔️Pick up your GlueTread patch kit today, use code: FROST10 for 10% off!
www.gluetread....
✔️Lasfit Off-Road Link's:
JL Switch Panel Kit: lddy.no/1e2jy
Lasfit Website: lddy.no/1e2jw
Use Code: FROST15 for 15% off!
✔️Frostbite Off-Road Merch: frostbiteoffro...
✔️Airing Up & Down:
Boulder Tools Deflator Kit: amzn.to/3p5wvOZ
Smittybilt Air Compressor: amzn.to/318Ewu2
Quick Air Chuck: amzn.to/2YWFCbB
✔️Recovery Gear:
Gear America Recovery Kit: amzn.to/3cZ3kr2
Warn Zeon 10s: amzn.to/3zsxY7z
✔️Off-Road Gear:
My Medic MyFAK First Aid Kit Solo: amzn.to/2Zw50VR
My Medic MyFAK First Aid Kit Advanced: amzn.to/3D49hNU
Trasharoo Spare Tire Trash Bag: amzn.to/3rhLp7x
Element E50 Fire Extinguisher: www.northridge...
✔️GMRS Radio & GPS Communicator:
ZOLEO Satellite Communicator: amzn.to/3FUOH4G
Midland Walkie Talkies: amzn.to/3I2k7HV
Midland MXT275 GMRS Radio: amzn.to/3o1jner
✔️GoPro Action Camera:
GoPro Hero 9: amzn.to/3HXFnyR
GoPro Hero 10: amzn.to/3E5MTVP
GoPro Tripod: amzn.to/3rxiWL9
✔️My Link's:
Instagram page: / frostbite_offroad
Amazon store link: www.amazon.com/...
00:00 Intro
0:19 Parts Needed
4:11 Assembly
12:11 Testing Old Setup
15:40 Testing New Setup
16:23 Outro
#wrangler #offroad #jlwrangler #rockcrawler #offroading #jeepwrangler #jeeplife #samurai #jeep #toyota
As an Amazon, Lasfit, GlueTread Associate I earn from qualifying purchases.

[@FROSTBITEOFFROAD]

Hope you guys enjoy this quick project, I’m excited to use this setup on the trail. Let me know what you think in the comments below 👇

[@marcointhedesert]

Not a bad build, pretty clean and simple, with inexpensive parts. Well done, but if I had a dollar for everytime I heard "Go ahead" I would have 78 dollars in 17 min. 🤣

[@TomCreedphx]

Go ahead!

[@Sitruc_btb]

Good video. Ive been looking around for 2 tire hose kits, or diy kits, and this is as basic as it gets. Thanks for the links. I have the same compressor, and it works well enough for my needs. Piecing together a 2 tire hose kit now.🤙

[@FROSTBITEOFFROAD]

I really like the 2 tire setup, it saves me time and it’s not a hassle to roll it all up. Good luck on your setup and thanks for watching the video!

[@IMTHEONEOVERLAND]

Great video bro ! Keep it up 🤟🤟

[@FROSTBITEOFFROAD]

Thanks! Will do!

[@AZHighlandHomestead]

I decided to go ahead with the go ahead and subscribed. 😑

[@FROSTBITEOFFROAD]

Thanks 👍

[@maverick_jl]

Good stuff man!! Love the channel!!

[@FROSTBITEOFFROAD]

Thanks man, appreciate it! 🍻

[@EngiTrek]

I have the same compressor. The most annoying part for me is turning the compressor on and off manually. I thought about adding a pressure switch to it. You would have to tune it to account for the pressure drop due to the flow velocity. You could do this by trial and error to fine tune the probability of hitting your desired pressure assuming you had a adjustable switch due to the uncertainty in the latency of the switch and environmental conditions such as temperature. It would require a small circuit to cut the current going to the pump via relay or something too. It’s a bit of work though haha so I haven’t done it yet. I just over fill the tire by a small amount then drop the pressure with a gage in hand.

[@FROSTBITEOFFROAD]

Yeah, it’s been a good little compressor. It would be cool to have an auto off on function. I know several of the companies are coming out with those now, it would be cool to modify ours to have that same function. Thanks for watching the video Scott!

[@DelanoJ]

Any issues with the 4 tire setup? I bought one and tried with my 2781 but the valve kept blowing.

[@FROSTBITEOFFROAD]

I’m still running the 2 tire setup I made is this video, it still works great. That air pump should be able to handle the 4 tire setup, I wonder if there is a blockage or high resistance somewhere down the line? Does the pump function properly with the factory included hose?

[@DelanoJ]

@@FROSTBITEOFFROAD it is supposed to work but don’t. Works great with standard hose. Had it for 2+yrs and never had any issues

[@FROSTBITEOFFROAD]

@@DelanoJ I wonder if one of your air chucks is stuck closed, you could take one off at a time and test it. I know one of mine doesn’t hold the pressure as well as the other, so it might be a good place to start.

[@DelanoJ]

@@FROSTBITEOFFROAD I will try that. They had to sell me extra chucks cuz stock ones didn’t fit apex design quick deflate

[@FROSTBITEOFFROAD]

@@DelanoJ let me know how it goes!