DIY Outdoor Patio Table Build (Build Plans Available)

Check out this easy to build DIY outdoor patio table I made using treated lumber!
*Digital plans including dimensions are available at the following link!*
mmccwoodshop.e...
Tools used in this video (amazon affiliate)
Dewalt drills: amzn.to/2O1O6ZI
Dewalt random orbital sander: amzn.to/3osPxwr
Dewalt miter saw: amzn.to/39oR2Y7
Diablo fine tooth miter saw blade: amzn.to/3sfFnSB
K4 Kreg Jig: amzn.to/3oq5fbt
Speed square: amzn.to/3oJryJj
Irwin 24” clamps: amzn.to/2NpFRWv
Jorgensen clamps: amzn.to/3j3FEnO
Central Machinery 2 HP dust collector: amzn.to/3tYrbON
GoPro Hero 8 Black: amzn.to/3idfFvh
Materials used:
Treated pine 2x6x8 (x1)
Treated pine 1x4x10 (x3)
1.25" outdoor construction screws (I used Power Pro brand)
1.75" outdoor construction screws (again, Power Pro brand)
Cut list & Dimensions:
Plans available at the following link:
mmccwoodshop.e...
Thanks for watching! Check out some of my other videos and find me on Instagram (MMCC_Woodshop). This was filmed with a GoPro Hero 8 Black and edited in iMovie.
*DISCLAIMER* The following content is for entertainment purposes only. Woodworking and using power tools can be extremely dangerous if not done properly. YOU (the viewer) are fully responsible for understanding proper use of tools, as well as the safety features of each. I highly suggest reading the owners manual and/or watching how-to videos on the tools. I (MMCC_Woodshop) am not responsible nor liable for any injury, death, or handing of the tools you may use, nor do I assume to display the proper handing of as a demonstration. Please use extreme caution when working with any power tools. - Matt
Want to support my channel? Feel free to buy me a coffee!www.buymeacoff...

[@mmcc_woodshop6288]

Digital plans including full dimensions and cut lengths are now available at the following link! mmccwoodshop.etsy.com/listing/1736676753

[@adolfolugo803]

Alright.

[@cbdr2]

Hi Matt! Thank you for the awesome video. Very well made and clearly explained. Makes a world of difference to those for whom, like me, this kind of work doesn't come easy. One little thing though. The cut list calls for two 20" pieces of 2x6 plus two 17" pieces. That amounts to 74 inches . You recommend a 72" 2x6. I just went ahead and bought an 8ft board at the store instead of the 6ft. Anyhow, great little table. Now everyone of my non-manual friends thinks I'm a house builder!😂

[@mmcc_woodshop6288]

Thanks for watching and the feedback, I fixed the error you mentioned - appreciate the heads up on that!

[@FridayWorkshop]

Your cuts are pretty darn accurate for not using a stop block. Mad Skilz man!!!!

[@mmcc_woodshop6288]

Thanks buddy! I can usually get them pretty close now. We just won't take about all the times I was off by 1/2" 😂

[@diegomoreno2070]

Simple and beautiful and awesome piece mr Matt keep teaching us hiw to build those amazing pieces.👍👊

[@mmcc_woodshop6288]

Thanks Diego! Appreciate the kind words!

[@jamesjohnson3052]

Very nice little table

[@mmcc_woodshop6288]

Thanks James!

[@brentciesliga]

As always, a great build, demonstrated in a very easy to follow format. I have some scrap lumber I am going to use to try to make one of these this week!

[@mmcc_woodshop6288]

Nice!! Thanks for the feedback and good luck with your build! 👍🏻

[@larrystone5749]

Good job and project thx for sharing

[@mmcc_woodshop6288]

Thanks Larry!

[@djjoeykmusic]

Awesome Thank you 🙏🏾

[@mmcc_woodshop6288]

Thanks for watching!

[@Narblo]

Yeah...I dont have one of those saw but I will try my best

[@mmcc_woodshop6288]

Sweet, good luck with your build and enjoy! 👍🏻

[@kevinswoodkraft8539]

Great little plan brother! You need to do a video on them sweet Adirondack chairs!! I do believe you were putting the power pro screws in your pocket holes, am I right? If so how are they working out. I won't tell Kreg Co. that you're not using their screws....lol!

[@mmcc_woodshop6288]

Thanks Kevin! I would have but I was totally winging the chairs! 😆 And yep, I never use the Kreg screws and everything holds up fine as long as you don’t over sink them.. maybe kreg will hook me up with some of theirs! Ha!

[@kevinswoodkraft8539]

@@mmcc_woodshop6288 Yeah I hear ya!!! I'm really sick of paying $20 for 250 screws! It's $28 for 250 if you get them from the blue and orange stores!!!! I build full time and I can afford it but I'd rather find a cheaper alternative and put that money somewhere else. After all we know the joint gets it's main strength from the glue! I appreciate you brother, great video.

[@mmcc_woodshop6288]

No kidding! That’s why I go with the other ones. Just made sure the screw itself is decent, the heads will snap right off the tops of some brands

[@sandyxavier123]

nice

[@mmcc_woodshop6288]

Thanks!

[@danstetson6053]

Never get dimensions from anything below so please put them in your video

[@mmcc_woodshop6288]

Hi Dan, the dimensions are available in the plans on my Etsy site, which is listed in the description 👍🏻