DIY Pico fighting board | Raspberry pi pico | SOCD cleaner | Wow it's fast!

[@JUANminiDIY]

Shop JMD Products on Lazada: s.lazada.com.ph/s.PgTaA?cc For custom fightsticks inquiries, message us: fb.com/juanminidiy

[@paganfamily]

I have to thank you!! I built a 2 player fighting stick and replaced a Dragonrise encoder with a Pico. It is much more responsive and and accurate. Great job!!

[@metricrl_]

Thank you so much, the last part of your description helped me out so much. I couldnt find anywhere on internet where I change my SOCD modes on my custom hitbox. Now it says on the LED screen "SOCD-U" instead of "SOCD-N". THANKS ALOT!

[@KnoVic0617]

Thx for sharing, mate fighting controllers are becoming more expensive it's time to build our own!

[@SquickWorks]

Great tutorial! Going to build my first fightstick soon from the ground up, and this video will definitely help. thanks :) Edit: I'm the 666th person to like the video. mwahaha

[@JUANminiDIY]

Thanks for watching! Good luck on building your fightstick. 👊 Let me know how it goes 😎

[@trinifella1]

I absolutely love your vids

[@GoYiTsU]

Good stuff! Keep 'em coming

[@dopachu00]

Thanks bro. It works perfectly. You are a genius.

[@xxyfujoshi]

hey, thank you so much for this guide, one question what is a quick detach terminal plug i cant find any online

[@dorshem-tov2470]

THANK YOU FOR THIS!

[@nullzero3455]

link for the dupont terminals? cant find thrm on shopee

[@Sporanzi]

Your channel totally inspired me to do my own hitbox. This video is exactly what I was looking for. Thanks a lot. However, are your sure this PCB is compatible with PS4 ?

[@JUANminiDIY]

Yes, as long as the game has legacy controller support like SFV and Tekken 7.

[@seganaomi9643]

Does it support to play street fighter 6 in ps4

[@bbqborgar1370]

@@seganaomi9643No it doesn't because street fighter 6 doesn't have legacy controller support

[@TanatomorFozis]

​@@bbqborgar1370I play in street fighter 6 on ps4 controller

[@DenkiinArt]

Is there any replacements for the terminal plugs? And also if its necessary to do if the wires are female-female

[@JUANminiDIY]

Yes

[@cyclonmaster]

Nice, gonna make one myself

[@laloxtreet]

Hola, se puede usar solo la placa raspberry pi pico Sin necesidad de la otra placa más grande? No se si me explico 🤔

[@JUANminiDIY]

yes you can.

[@mrharoun3214]

​@@JUANminiDIYbur will it change anything? I want to use only for pc

[@masfye]

Hello Juan, im from Indonesia, can i use your video from 4:17 until 4:50? i want to create a video how to make a arcade stick, but i dont have a documentation video on how to install gp2040 to pico board, please let me know if you ok :)

[@Hitoratsi]

sir nag download ako ng raspberrypipico.uf2, na lagay ko na sya sa RPI after that pag punta ko sa devices and printers wala yung XINput gamepad, ang lumalabas lang is internet sharing device sa raspberry pi pico ko.

[@duxnihilo]

Can I make a crossup hitbox with this? Essentially, a stick (acting as the analog stick) and four buttons acting as the d-pad.

[@JUANminiDIY]

No, you can only choose analog or dpad function but you can do cross-up with it.

[@sharkred]

​@@JUANminiDIY Awesome video, I just found it today! Sorry the dumb question, but in this case of cross-up, it's only necessary to use the same pin for the stick direction and button direction to make it work?

[@tortillajackson881]

cant seem to access the config window, just says site cant be reached

[@JUANminiDIY]

Make sure to hold the start button before plugin the usb

[@tortillajackson881]

@@JUANminiDIY oooooooooooooh gotcha

[@chiyoremeh140]

Nice tutorial! May I know if you can hook up a RGB strip on pico board?

[@Vexatedcanicus]

You can. There's tutorials on youtube on how to do it if you're building a fightstick with rgb

[@ryekorodynator]

Web configuration doen't work for me. I can enter to web configurator but only to configuration PIN Mapping. When I click in to Settings tabs, I only show this for 1ms and then i have clear http web page. I try on 2 computer :-(

[@JUANminiDIY]

Use a different browser I guess.

[@packnerz2017]

Sir, is it possible to do a crossup style stick in this controller?

[@JUANminiDIY]

Yes

[@JosEffigy]

whats A1 and A2?

[@poppunkloser]

My friend, when you uploaded this one i thought it was a review of the Pico Fighting Board but from what i can see, you're using the hacked raspberry pi as the pcb for a fightstick? that's genius!

[@sasouri]

QUESTION : can you use it with Sanwa JLF joystick ?

[@JUANminiDIY]

You can

[@sasouri]

@@JUANminiDIY thank you so much to replay . we love you

[@ninetendopesaitama2107]

Could you mod a already built Pico hitbox? Like the haute 42 g16? ☮️

[@JUANminiDIY]

no

[@royrepie61]

Nice tutorial...thankyou 😊🙏 I wanna build fighting board to replace Zero Delay Encoder.

[@SuperBlackfox22]

Awesome video, I'm stuck on how to wire the buttons to the Pico for an eight-button arcade stick.? I'm very new to this world of making things any help would be grateful

[@JUANminiDIY]

Make a daisy chain connector for ground.

[@victorhugovalenciavalencia8270]

puedes hacer un video de en que pines conectar los leds y como configurarlos en su pagina

[@JUANminiDIY]

will do

[@WenZhen001]

Xbox 360 Controller for Windows already connect ,but cant use 192.168.7.1 IP address chrome tell cant open that ip address

[@JUANminiDIY]

Hold the start button before plugging the usb then release. Type the IP address and it should worked.

[@hermontarmand2404]

@@JUANminiDIY I did hold the start button but It still didn't work

[@hermontarmand2404]

Sorry what I did was I hold the botsel button instead of the start button. Then I realised that you have to connect/wiring a button (and of course a ground wire) to the default start button in the pcb/board, that is the start button, and then you do the rest.

[@eraldylli]

Can you add more buttons to the config? I want to add two more, lets call the R4 and L4 for simplicity. Is there an easy way to add them? Thanks.

[@JUANminiDIY]

none

[@NIGHTKILLER05]

Hi! Can I Use the Pico Fighting Board Designed by Feral with the GP-2040-CE firmware?

[@JUANminiDIY]

yes

[@emilkolano8382]

does any1 know if it will work on xbox one through brook wingman xb?

[@JUANminiDIY]

Yes it will work

[@emilkolano8382]

@@JUANminiDIY i found it works only throuugh wingman xb adapter and in switch nintendo mode

[@TuanAnhLe-mt8uu]

Fix 8 minute ps4?

[@ozgurertan5461]

Hello, where can I find this software?

[@retrogamingindo4238]

Nice tutorial, do you have cable routing for the board?

[@retrogamingindo4238]

I mean the diagram of the cable routing from the pin into the button

[@retrogamingindo4238]

Nvm i found it

[@JUANminiDIY]

Yes I do

[@retrogamingindo4238]

@@JUANminiDIY can you use micro jst cable with 2.54mm for the connection to the pin?

[@JUANminiDIY]

@@retrogamingindo4238 yes, but need a little modification.

[@TheRealOmniMan777]

I got all the way to typing in "192.168.7.1" and it timed out/doesn't work.

[@JUANminiDIY]

Hold the start button before plugging the usb then release. Type the IP address and it should worked.

[@hermontarmand2404]

You have to connect a button to the start pin on the board (don't forget the ground wire) to be able to press and hold the start button. Assuming that you haven't built a controller yet like me

[@hansvergara4320]

Another quiestion friend... Do You have a way to screw the pico to plywood? The holes are too small :(

[@JUANminiDIY]

I stick it on with an arylic sheet then put another holes and screw it on wood.

[@Leonlnd]

Hello Is it possible to disable SOCD?

[@JUANminiDIY]

You can change it

[@akosichoongoyt461]

Good day! Ask lang po, any links po ng mga parts na ginamit? Thanks...

[@luisubilla7941]

Saludos desde chile.muy buen video ,sera compatible con xbox series? Saludos nuevamente

[@JUANminiDIY]

thanks

[@imanny99]

Nice video. Is it possible to change SOCD mode on the fly, or do you always have to do it in the configurator?

[@jeremoople]

I think there's a way to do it by holding down certain buttons. It explains it somewhere on the GitHub pages, but I don't remember which ones

[@cola6378]

JUANminiDIY ho to change blnterval 4 and 8 please ?

[@cola6378]

how to do change 1 to 4 and 8 pplease

[@nekobro9854]

Amazing work! I was wondering, to connect the pico and the dupont terminals, is enough use some kind of glue or it's necessary to solder them?

[@JUANminiDIY]

Solder them😄

[@Undar8ed03]

Hello. I have an arcade cab that I'm putting a pc in to play most of my favorite games. My question is could I use 2 of these on the same pc without issue?? Awesome video btw!!!

[@JUANminiDIY]

Yes you can

[@Undar8ed03]

Thank you so much. So I’m taking it that the pc will assign P1 and P2 itself or is that something I will have to do.

[@fabianobr79]

does it work with RP2040 TYPE-C 4MB?

[@JUANminiDIY]

Never tried yet

[@OrangeSheep14]

Do they sell these right now? Where could I buy one?

[@2old2steak]

The store's been down for months, there's people starting to make alternatives to it though.

[@OrangeSheep14]

@@2old2steak what are the alternatives?

[@2old2steak]

@@OrangeSheep14 Check the OpenStick discord, there's one that might be out this month. Otherwise you can just get a pico and a generic breakout board like the whiteeeen. You can't use brook wiring like you can with these but it'll work the same.

[@aanaabaa]

Hey awesome video, can this be used for crossup arcade stick?

[@JUANminiDIY]

Yes, absolutely

[@johnnyfavorite8730]

hey i had a question when i try to go to the web config it wont let me open the page is it because firewall?great video btw

[@JUANminiDIY]

Hold the start button, then plug it in. Go to gui, it should work now.

[@hermontarmand2404]

@@JUANminiDIY What gui?

[@ryanmichalski7420]

If I wanted to make a Mame arcade cabinet for four playerswould I need four of these.

[@JUANminiDIY]

Yes

[@Ableth]

Can you do it with only the raspberry pico ?

[@JUANminiDIY]

Yes

[@Ableth]

@@JUANminiDIY Thank you

[@Haxzilog]

boss yun bang brook zero pi ang gamit nyo sa mga hitbox nyo ?

[@JUANminiDIY]

Pwede zero pi gamitin.

[@hansvergara4320]

Hi, great vídeo ... I have a question: i also downloaded the same firmware of Raspberry pico but i have some problems with web configurator, does it works really? It is functional from the link in the description? Great work man! Thanks

[@JUANminiDIY]

You need to hold the start button, plugin the usb to your pc, then release start button.

[@leobalma]

you have to do it fast like one sec hold, look the graph that have te wiring put only the one the activates start and then do the holding thing haaha

[@hansvergara4320]

@@leobalma hello, really i can to access to web configurator but some functions don't work... I think the problem is the Chrome version because in other PC works good

[@aazt5792]

THANK YOU

[@chantergaming2800]

kuya juan bat hindi mag open yung web configuration?

[@JUANminiDIY]

palit ka ng cable

[@joua_sh]

Finally salamat ps4 support thx po 😘

[@finpinoytutorials]

ano sukat ng quick detach?

[@JUANminiDIY]

2.8mm

[@Nextliar]

and then...?

[@kyokusanagui1222]

hi great tutorial what model of raspberry pi pico are you using THANKS

[@JUANminiDIY]

Vanilla

[@chantergaming2800]

mag wowork ba ito sa ps4?

[@JUANminiDIY]

yes

[@jelocampos7299]

Saan po ito nabibili?

[@JUANminiDIY]

facebook.com/juanminidiy

[@tortillajackson881]

so can i just plug and play to a ps3/4 xbox one/series s/x?

[@JUANminiDIY]

not this board, use brook universal fighting board.

[@MFA-TECH-WORLD9749]

It's pi pico board support PS4 console

[@JUANminiDIY]

yes

[@ZeroWolf9999]

done subscribe

[@NergiganteTheGreat]

for ps5?

[@JUANminiDIY]

yes