DIY PLANER CART Build with Dust Collection

Join me as we build a DIY Planer Cart with a dust collection to minimize the dust in the shop.

[@scotttucker8095]

That is one sweet table. Well done.

[@sportstertaco]

Who said shop furniture can't look nice. Good job.

[@wrbuilt2110]

Amen! Thanks, Sportstertaco!

[@paulmanvell4615]

Wasn't sure where you was going with it to start, but boy did it turn out good. Top job fella 👍

[@wrbuilt2110]

Thanks, Paul!

[@rudyschwab7709]

I really like how you simplified the chip collection with no additional machinery needed. You have definitely given me some ideas.

[@wrbuilt2110]

Thanks, Rudy!

[@FounderOf4]

That has to be the most solid and best looking planer cart in the history of history!

[@wrbuilt2110]

Thank you!

[@vendright]

I love what you've done for a planer cart.

[@akquicksilver]

Very nice cart with attention to detail. Now get you a Byrd Helix cutter head and you will love that planer. Installed one in mine a few years ago. Way better than the knives.

[@wrbuilt2110]

Thanks, JB! That is the plan going forward.

[@robertbamford8266]

Looks like the passive dust collection works well on the planer. Clever dart design.

[@wrbuilt2110]

Thanks, Robert!

[@Rusty_ok]

That’s the word I was looking for “passive”. I was expecting to see a shop vac or the ability to plug in a dust collection system.

[@wrbuilt2110]

I will have a central dust collection system in the near future, but for now having the shop vac hoses all over the place in addition to the extra noise drives me crazy! So this cart was a simplified solution of that.

[@TheBonbenk]

I like it how you nail all of them together lol. It's inspiring, I will buy the same planer tomorrow. Thank you for the video.

[@eileenjohnson1757]

WOW!! INCREDIBLE!!!!! Nicely done!!!! I love it!!!

[@ahranon]

That's a piece of art. I'm definitely inspired to think about my tool stations differently

[@wrbuilt2110]

Thanks, ahranon!

[@williamdoyle649]

Great idea.I like the angled support and extra shelf.We’ll done.

[@wrbuilt2110]

Thanks, William!

[@amatamat55]

Thank you for your video,I love the look of your cart it’s modern and looks like a nice piece of furniture but most of all totally functional. When I saw you put the bin on the bottom I realized I really don’t need to hook it up to my dust collector because it does have enough power to push all the dust particles out, great idea. I like your footage as well on your video trying to work on my video skills. Once again thank you so much

[@wrbuilt2110]

Thanks for the feedback, Leo! I really appreciate that. I just build for fun so it’s nice to get creative and build “shop furniture” 😁.

[@dennisTHEmenac3]

Excellent design and finish! One of the best I’ve seen. Videography was also well done. Two suggestions- use a removable air filter (rated down to the micron of dust particles) and configure the stand for easy removal and insertion for the filter (similar to how easy it is to remove the bin). Maybe add a boot seal to where your hose passes through the table top (if you begin to notice dust coming back up through the tiny gaps

[@wrbuilt2110]

Thanks for the feedback, Denny! I had planned on running a boot or possibly making a large grommet for the hose. Just using the cart to see if it’s needed. I think if I run the planer inside more I’ll need to upgrade the filter to a lower micro as you suggest. Thanks again for the comment!

[@photojed]

Very nicely done. Different design than most others. If I were to walk into your shop my eye would be drawn to the design of that cart.

[@wrbuilt2110]

Thanks, Jed!

[@GurpreetSingh-hv7bv]

Very nice to see a new face and a new channel. I wish you all the best in your future endeavors. Nicely done.

[@wrbuilt2110]

Greatly appreciate your comment and kind words, Gurpreet!

[@scottcountryman6090]

You did a dope job on that cart cool design

[@wrbuilt2110]

Thanks, Scott!

[@sitka250]

That's a great looking cart!!

[@wrbuilt2110]

Thanks, Marcus!

[@ahmed25]

We’ll done. Looks amazing

[@wrbuilt2110]

Thanks, Ahmed!

[@nctplarry]

Terrific!! Now, just replace the stock cutter head with a Shelix cutter head from Byrd (get the OEM model so the measurements won't be off)...and you'll never look back. Well done, sir!

[@wrbuilt2110]

Thanks, Larry! The Shelix cutter heads have been on my todo list!

[@bhoola123]

Great idea and job. Thanks for sharing.

[@wrbuilt2110]

Thanks, Lu!

[@danlynch1154]

Nice job! Unique approach. Thanks.

[@wrbuilt2110]

Thanks, Dan!

[@terristroh3965]

New sub! Keep these quality builds coming!

[@wrbuilt2110]

Thanks, Terri!

[@sitka250]

Best I've personally seen so far.

[@wrbuilt2110]

Thanks, Marcus!

[@PhilsWorkshop1953]

Thanks for the video journey I thought mine was over built but yours is a piece of furniture way out of my league have subscribed to your channel

[@wrbuilt2110]

😂 Thanks, Phil!

[@PhilsWorkshop1953]

@@wrbuilt2110 your most welcome if you go to my channel you’ll find my videos on the video button

[@WoodShopStop]

Very creative, good job!

[@wrbuilt2110]

Thank you!

[@talegunner4414]

Unreal cart sir. Nice work... I'm in love with your design especially the center post! I have that same planer. I have made one change in the planer and that was to add a helical cutterhead (not that it would make any changes to your design).

[@wrbuilt2110]

Thanks, Tale! I have been thinking about swapping to the Helical head. Was it worth it?

[@talegunner4414]

@@wrbuilt2110 I love how smooth the boards are after running through. I would warn you there are 2 different sizes of heads. You want the OEM size. If you get the smaller you run the risk of popping the circuit breaker.

[@wrbuilt2110]

That is good information to know! Thanks, Tale.

[@kwilliams2239]

@@talegunner4414 Also be warned that the Shelix head is on a very long back-order (as much as nine or ten months). The LuxCut head is every bit as good and probably better than the Shelix. It's available immediately.

[@talegunner4414]

@@kwilliams2239 Good information. Thank you

[@chrisnash2154]

I really like the cart design! I like it so much I think I’m going to build a new cart for my planer based on your design. Do you experience any racking, “side to side flex” without any front support? It looks like the bulk of the support is that 6 x 6 post. I also noticed that you didn’t use lag bolts to mount the 6 x 6 post to either the upper or lower platform. In hindsight do you think that would’ve been better or are the screws that you used sufficient?

[@wrbuilt2110]

Hey, Chris. Surprisingly there is no sagging or racking. However, I think that’s likely because the hickory flooring is all nailed into the framing (the framing is all screwed together) and weight of the Planer sits pretty much directly on the top of the 6x6. Which helps not stress those outer edges. All the framing is screwed into the 6x6 post with 3” construction screws. Let’s just say it’s a bit overbuilt and hope that I never move 😂. If you end up building one you’ll have to send me some pictures!

[@dylanhunt5567]

What do we have to do for a cut list?? Looks amazing!

[@wrbuilt2110]

Thanks, Dylan! Maybe something I can put together in the future.

[@lucasarismendez1034]

Very nicely done. Just curious on if any restrictions from clogging perhaps with that type of dust collection hose? Being there is no vacuum system. But very nice job.

[@wrbuilt2110]

Thanks, Lucas! This model of the Dewalt planer has an extremely strong fan. Before attempting to contain the dust/chip collection the planer would shoot the chips about 20+ feet down my driveway. I was slightly concerned that the hose size I used could be an issue, but mainly because everyone else I saw used the 4” extraction hose. However, I figured that since I already had the smaller hose I could try it and easily upgrade later if it became an issue. I have been using it as is for a month or so and it’s working really well. The upside is the smaller hose doesn’t get in the way of the material like the larger 4” hose could in my setup. Hope this was helpful.

[@photojed]

I can tell you from experience you don't need a powered dust extractor. I use a smooth bore PVC pipe right into a covered garbage can. If you don't cover the garbage can sawdust will fly out everywhere.

[@fritterVII]

That is a really sharp looking cart! Possibly too nice for my shop, it might just roll out spontaneously if it sees how crappy the rest of my shop furniture is. :) But I'm absolutely stealing that slanted central pillar.

[@wrbuilt2110]

😂🤣 thanks for the feedback, Joe!

[@user-pg6jl7jw7s]

I like the design, but I would think the filter would get clogged in no time. I have the same planer and I finally resorted to a bag to catch the chips.

[@wrbuilt2110]

I appreciate the feedback, J. You may be right, the dust collection could need a 2.0 version down the road.

[@SwapnilBhartiya]

Not sure if that single angled support can hold that much weight.

[@wrbuilt2110]

So far so good! A little over a year later and still holding up!

[@kalango198]

Uau 😮 👍👏👏👏👏

[@wrbuilt2110]

Thanks, Calango!

[@FatherOfTheParty]

You clearly stole my trashcan cart idea . . . :) Nice build!

[@wrbuilt2110]

Thanks, Paul!

[@kwilliams2239]

The cart is certainly well done but isn't it a bit of overkill for a planer? It looks like furniture. What does this thing weigh? The dust bin looks pretty small for a planer. IME planers create piles and piles of shavings. I'd think a larger bin would be in order. I replaced the stock dust port with a vertical port and connected that directly to my DC. The vertical port works better and moves it from the back to the top, where it's out of the way. I then use either the planer or drum sander by rolling its cart under the DC hose (hung from the ceiling). Your filter is a good idea but like others, I think it should be easier to remove. OTOH, a quick pass with a shop vac should be good. Planer shavings are pretty large so I think this filter will work fine. Overall, nice design and execution.

[@wrbuilt2110]

Thanks for the feedback, K Williams. Very much overkill 😁. It’s extremely heavy… I hope I don’t move anytime soon! I’ve been looking into a centralized dust collection system and I think it’s something on the horizon very soon. Plus, the summers here down south are brutal so it would be nice not to have to go outside to cut something. The ultimate goal is to not use the dust collection system on the cart unless it was outside the shop, but just haven’t made it that far yet. Soon!

[@kwilliams2239]

@@wrbuilt2110 Well, my shop in my previous house was split between the attic and garage. I lived in East-central Alabama at the time so I understand woodworking in the summer. 😅 We've since moved to GA but I now have an unfinished basement all to myself. It's still hot but the basement isn't too bad and I put in a small window AC for August. You'll appreciate dust collection. I just have a cheap bag-style DC but it is 2HP, so works.

[@brianhodgson9547]

Why didn't you mark or position the upright, so you didn't have to cut out the tongue & grove around the upright

[@wrbuilt2110]

Very good question 🤔. The way I did it just seemed the right way in my head at the time. I appreciate the feedback, Brian!

[@brianhodgson9547]

@@wrbuilt2110 Good video, it was a query rather than a criticism

[@wrbuilt2110]

I know! I always appreciate the difference of perspective. It seems like whenever you’re building something a little unique it can be difficult to find inspiration from someone else who has already done it. So from there I just go with what’s in my head 😂.

[@keithgeorge2541]

I could never make that cart because my wife would steal it for the house for her KitchenAid mixer and food processor.

[@wrbuilt2110]

😂 don’t give mine any ideas!

[@Mushaway-wv7hq]

He has his tight Pants on....lol