DIY Powder Coating is Easy...

My powder coating gun: indystry.cc/product/powder-co...
My booth design: www.printables.com/pl/model/7...
My tools for powder coating:
3M mask: amzn.to/3RiThRk
Mini oven: amzn.to/3RAX6Sn
Air compressor: amzn.to/47QP4vj
Powder coating paint: amzn.to/3RKLVI5
Powder coating hooks: amzn.to/47SEwfo
LED strip: amzn.to/487XbDB
📰More info: indystry.cc/how-to-diy-powder...
🛠️ Indystry: indystry.cc/
📷 Instagram: / nikodembartnik
❤ Patreon: / nikodembartnik
✉️Business inquiries: [e-mail]
Subscriber count at the time of upload: 122 502

[@nikodembartnik]

Use code "DIYPowderCoating" to get 10% off the Powder Coating gun in my store: indystry.cc/product/powder-coating-gun/

[@mitchellquinn]

Re safety ... my foster father died from emphysema, caused by a combination of spray painting and smoking. Sure powder coating is safer than spray painting, but your lungs are like wet tissue paper ... and generally you only get one set. So treat them with respect ... because breathing is kind of important.

[@GENcELL2014]

As a DIYer that is gradually developing into a more commercial or service related manufacturing role and as a result am machining things like composite(fiberglass, carbon fiber), plastic, wood, aluminum, not having a early death from exposure to things like fiberglass dust is a focus.

[@larryb4122]

Glad to see you are still designing and sharing. Don't let that bump in the road put an end to your creativity. Better things are coming your way.

[@CraigHollabaugh]

I started powder coating about 4 months ago and love it. Easy and so much fun. In US, get powder from Prismatic or Columbia and wear a respirator not a simple mask. Glad to see you're coating your projects, learning new skills and sharing your enthusiasm.

[@joebanks3698]

Fantastic instructional video on budget diy powder coating. Your attention to details on safety and methods is excellent. You give me the knowledge and confidence to set up my own coating room. Thanks! 👍👍

I absolutely love the finish on those powder coated parts. Thank you so very much for sharing your project. Brilliant!

[@joshuaszeto]

This is a really good video on how to do it at home. Just wanted to mention that if you preheat your parts, you most likely won't be able to cleanly blow off the powdercoating since some of it will instantly flow out when touching hot metal. I have heard of this technique being called "hot flocking". It's to powdercoat things like glass since it's not easy to make the glass have an electrostatic charge.

[@boeroe45]

Excellent video. I love how you emphasize the safety aspect!!!

[@phatcap976]

This week I was thinking about building a machine like this and BOOM you upload this video. Thank you

[@dachr2]

Had to stop and give a like after your talk about safety. Keep it up! We need more makers that embrace safety equipment.

[@anadventfollower1181]

Very cool. Try implementing a plexiglass door to have it enclosed (like those DIY sandblasting rigs) while installing some form of blow out filter. Awesome work.

[@timhoover1416]

Keep up the good work Nikodem. I plan to try and make the Indy Mill soon. My daughter is getting married next weekend and that has been costing lots of money. Once we get to the spring hopefully I will have the funds to start on that project. I really love your projects.

[@UnboundGodz]

That metal break came out so good! Pro quality for sure!! Now im tempted to try this in my shed. lol

[@davidhorizon8401]

Awesome! I have never thought of doing my own powder coat. That looks pretty easy.

[@Dav37558]

Been powder coating for a few years I have the same gun got from Nordic powders love the quality of results Iv achieved

[@matthewread1913]

Really like your set up, it has inspired me to work towards set up my own powder coating booth thank.👍

[@clement6636]

Wow, just discovered your channel, underated!!

[@TheFlyBullet]

Quick tip regarding the short milling scene: you should have milled the other way around (counter clockwise) it's a concept often taught in the context of manual mills because the cutting pressure presses against the direction of motion, so the mill can't use the slack in the axis spindle to 'jump around'... Well if you have ball screws this theoretically shouldn't be a problem, however I found that in non industrial/budget mills it's best to stick to that practice because they tend to have some give... Try it, it might work better.. seeing the build up on the edge of the part I highly suspect that.. if your parts are getting undersize then (measure the edge, it might get crooked) you can try to use a bigger endmill or your machine has too much flex..

[@PiefacePete46]

Excellent Nikodem, thanks... that must be sooo satisfying. 👍

[@nikodembartnik]

It really is!

[@gyorgybalassy]

Very nice, thanks for sharing! I'm also from Europe, and when I built my paint booth (for spray painting) I also could not find a box fan to use. I went with a design similar to yours and I chose kitchen cooker extractor filters for air filtering. They are sold in larger sheets I can cut to my custom size with scissors and they work quite well.

[@onjofilms]

Sounds to me an opportunity to sell box fans in Europe.

[@nanastos18060]

Awesome an amazing job. Please keep up the hard work. Love the contact.

[@fredpinczuk7352]

Your English is perfectly fine, no worries. Great tutorial.

[@jeffreymartin1489]

I'm very interested in the wind tunnel you mentioned. I spent a couple years on a similar project with mixed success. Our problem was with turbulence above an unfortunately low speed.

[@arbitrary_username]

If you don‘t want to be limited to oven size, you can also use radiant heaters.

[@enzanto]

Havent watched the video yet. But i recognized the powder gun, And it is super easy!

[@Michel-tz3kt]

Really cool project, thank you!

[@an_ancient_space_gamer3605]

amazing work cant wait to one day see you hit a million subs

[@mists_of_time]

I was actually wondering about powder coating a couple of days ago. I expected it to be harder. I may try this in the future. Thank you!

[@gosonegr]

I used to work during summers for an industrial paint company during summers, they taught me how to do it in like 10 minutes. The only "difficult" part is to make sure everything is absolutely clean and nothing touches the powdered part.

[@drew349]

Love the animations in the beginning

[@MegaSoyaMan]

Amazing job , 💪🏾👌🏾I keep the idea when I will paint my piece of cnc 👍🏾

[@glrider100]

The Carousal was a stroke of genius.. well done.

[@garagesoup7590]

I really like your video style and animation in the video explanation. Keep it up!!

[@nikodembartnik]

Thanks a lot!

[@TubeDaLube]

Great set up,you are badass 😉Thank you for sharing 👍

[@nikodembartnik]

Thanks for watching!

[@DavidM2002]

If you are bending aluminum, it's best to buy the right alloy as some are better for bending than machining ( even though you have to do both ). I had to make a motorcycle rack which needed bending. The metal supplier said to use 5052 H32 and it bent quite nicely. Also, be careful of too tight of a bend radius as you may end up with stress cracks. Very well done video Nik.

[@tookitogo]

100% ^^^ When I was doing my electronics technician apprenticeship, which included some mechanical shop work, I had to remake an enclosure because someone had mixed up the types of sheet aluminum, and gave me a piece that was the wrong alloy. It cracked visibly when bending it on the brake.

[@ph08nyx]

An ingenious design! As simple as possible, except for fans with ESC. Fans could be installed ready-made with an asynchronous motor. It would be even cheaper (considering the cost of the power supply and ESC's). I really liked the painting camera! In particular, the lighting is well done - it evenly illuminates and does not shine in the eyes - and all this is achieved by using simple corner profiles! Although, again, there are LED bulbs available that are powered from an outlet rather than a power supply.

[@Bartosz_PL]

Dobra robota! Jak chcesz utrzymać dobrą jakość malowania, to pamiętaj o usuwaniu narożników na blachach fazka a najlepiej promień. Farba słabo się trzyma na ostrych krawędziach. Bo ładunki elektrostatyczne nie trzymają się dobrze na ostrzach. Po laserze są bardzo ostre krawędzie i tlenki, które trzeba też usunąć. Aluminium spokojnie pomalujesz, ale poza powyższymi, musi być zmartwione na całej powierzchni np szlifierką oscylacyjną.

[@lint2023]

Is there ever a problem with the electrical connection from the hanging loop at the top through the hook and to the part to be coated? Does the connection areas have to be cleaned/sanded after getting coated? Very cool what you have done.

[@MrBiswas123]

The intro animation 😍

[@Kmnri]

Finally, audio quality is ok. There is still room for improvement but its much much better than it was before in your videos. Also, you don't want to inhale mdf particles that gets produced with drilling and cutting.

[@rvg557]

Excellent ! Did you try to coat graphite powder with this approach so that you can do plastic electroplating work ? Or is it too dangerous / infeasible ?

[@Arek_R.]

0 mention on what is this alligator clip connected to the painted part, does it go to some power supply or what?

[@user-su2hy1ny1w]

Wow. I have No clue why I watched this😜 I have no intentions to powdercoat anything. BUT: I watched the whole video until the end because it was interesting and you're a pretty cool Dude and explain very well. So thanks for entertaining and educating me, I guess. Gonna subscribe anyway, because your channel is 👌. Greetings from here to there.😊

[@RoamingAdhocrat]

I appreciate the emphasis on personal safety. Just takes a small incident to knock you out of fun hobby stuff for weeks (or worse!)

[@onjofilms]

Me too, I thought that was very intelligent.

[@vickysharma754]

Is it possible to dry and reuse powder coating powder that has gotten wet from water accidentally falling on it

[@FunDumb]

Do you think laser toner would be an acceptable substitute to powder coating ink? I have an endless supply of this. There are metals in the CMYK toners I have.

[@darrenosborn7665]

Do you have a link to printing just the nozzle or hace it as purchase minus gun

[@sterkriger2572]

Would a PC cooler fan work? Something like a 140mm?

[@harviecz]

Can you just wire all 3 fans in parallel and use with single ESC? That's basicaly same as using multiple 3 phase motors connected to single 3 phase supply, which is quite common right?

[@tookitogo]

7:41 Why not just a bunch of square electronics cooling fans? Either the 12V kinds used in PCs, or mains-powered ones.

[@Fabio_FIN]

The models used by ´´industry´´ with high-voltage charging are not much more expensive, but they have better adjustability so that the powder sticks.

[@jeoq8566]

Awesome !!

[@krezac]

Hi Nikodem, do you plan to publish your "box fan" design? I'm currently in the process of looking up the alternatives as they are also not available here (Czech Republic). If it's somewhere already, sorry for bothering. Thanks

[@Shaded]

Mega szacuneczek!

[@grilsegrils9330]

How good protection can powder coating give for outdoor use, or outdoor near the ocean (salt can be a problem)? Can you cover with some type of of rust protection before powder coating? I saw a video where someone baked bare metal parts heating the metal first in flame torch and then added oils. It made a protective film. Could powder coating stick to such a part?

[@vickysharma754]

How to powder coat inside a small narrow pipe?

[@4tra]

does the oven has to be Electrical or it can be gas?

[@PiefacePete46]

This has always been in my "Too hard basket"... maybe it shouldn't have been! 😀

[@jongwonlee4728]

can you create TUBERCLE + TOROIDAL version fan...?

[@firSound]

Thank you very much for sharing. Nicely done. You earned a subscriber. I am only mentioning this since you mentioned pronunciation; your English is really quite good. In fact, I'd say it's exceptional. It seems like you care about your pronunciation, so I'm only pointing this out constructively. "Booth" was very understandable immediately. Your "th" was slightly "f" like in sound. Say "Boo" "think" then combine dropping the "ink" - "booth". The only word that took me a second to realize what you said was "bearing". Your pronunciation sounded too similar to "bring". Remember, "bare" like naked and "bear" the animal are said the same. Say the animal "bear" then add your "ing". That was me at my most discerning, so well done!

[@jongwonlee4728]

can you create Tubercle + Toroidal version fan...?

[@billytalentrocks345]

Maybe use electric charge for the filters? I mean, the paint will stick to charged materials. Maybe some metal strips (alu, copper etc) that can ve electrically charged. Or a plastic or glass rod that you wipe with a wool cloth. Or those static electricity generators, which I forgot the name of.

[@user-lx9jm1wo3h]

Can you get some PEI powder and powder coat some spring steel sheets? This is something I have wanted to do for about 5 years now, but I dont live in a place where I can do this.

[@vintagemotorsalways1676]

7:43 Large format PC case fans are cheaper and more accessible, since you can just buy them without needing a 3d printer.

[@savage6394]

Powder coating actually uses such a small amount of air you can use a very small air compressor.

[@CrAzYDr1veR]

next teach us the easyest way for plating zinc or any other metal protection :)

[@iznasen]

Production line, there we go!

[@dawidk5182]

Hej - w sprawie oświetlenia ledowego tej kabiny - koniecznie użyj listw aluminiowych dla led - chodzi o ciepło i żywotność led - odpuść sobie ledy powlekane bo ta silikonowa warstwa szybko żółknie - zamiast tego co jakiś czas wyczyść albo wymień przesłonę w profilu led... kosztuje to grosze - ciekawy film

[@_NeoPill]

ground the grip then you will be grounded unless you want to be covered in powder like right now- your face mask pulls powder. Mostly professionall equipement is making grounding on the hand grip of a powder gun and you don't wear a glove.

[@lilih3958]

can you remake your own powder coating gun. from scratch?

[@ladedk]

Why did you have to make new concrete walls?

[@gregregister7334]

show us around your new home & shop !

[@nikodembartnik]

kzbin.info/www/bejne/gXbTiIt8fK11e8U

[@HayesHaugen]

Your pronunciation of "booth" is correct.

[@onjofilms]

Cool.

[@mateuszk8616]

Super!

[@rgalete]

If the rotating hanging loop was fixed to a slip ring connected to ground would be awesome, you probably wouldn’t need to move the ground wire with the alligator clip away from the part to paint. Congrats on the project! I looks great!

[@nikodembartnik]

The loop where I hang the parts touches the bearing and there is a screw screws through the plastic so that it touches the bearing and to that screw I attach the aligator clip. So, yes, the cable is away and it doesn't disturb the painting.

[@1islam1]

​@@nikodembartnik⚠️ God has said in the Quran: 🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 ) 🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 ) 🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 ) 🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 ) 🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 ) ⚠️ Quran

[@kkuenzel56]

That's really cool! Too bad you shouldn't use your daily use kitchen oven. Maybe a toaster oven for small parts would work

[@Tabbithakitten]

Why not use computer fans instead of your custom fans? Those little brushless motors are really expensive arent they? Computer fans can be combined together the same way you have done. I think they sell fairly large ones too.

[@DennisMurphey]

Is there anyway to powder cost plastic parts? 3D Printed parts, low heat annealing without warping could a powder coat be found that would cure at those temps???? My Micro Mill used some of your Dremel CNC parts. It just needs X Y Stepper adaptors to complete for test. You are having so much fun and help So many get into whatever this is called. DIY Maker Stuff. Dennis

[@newolde1]

Powder coating only works for metal, plastic is not conductive.

[@anon-means-anon]

It's always interesting to hear about regional differences, but I really didn't expect box fans of all things to be an exclusively American thing.

[@Multifuchs]

Could you build a powdered toast man, too?

[@alejandrotaudil3689]

Nice!

[@error-4518]

I remember working in a metal working facility for a while, there the powder coat guy was always red from head to toe, wonder if he is still alive.

[@Gringottone]

Klasa, mega upgrade jakości

[@Omapk]

It's amazing to me that you don't have box fans.. I figured they would be everywhere. Cheap, big, moves tons of air and fits in a window. Could probably have just used PC fans instead of making your own? but they wouldn't have been as big.

[@limebulls]

What’s the name of the BLDC motor? Can’t find it online :( 7:35

[@nikodembartnik]

A2212

[@maff1917]

Wait, is this powder coating gun 3d printed?

[@nikodembartnik]

Yes, it is :)

[@mivus]

Poland stronk!

[@danielsiola]

Szczerze nie oglądałem zbytnio uważnie filmu, jednak dodałbym ze kompresor musi mieć zespół przygotowania powietrza lub po prostu odolejacz i osuszacz. Chyba że jest dentystyczny lub bezolejowy to już zmienia postać rzeczy.

[@thundergod7391]

I wan to purchase one powder coating machine. I am from india . how to if i don't have gpay. Please guide me

[@nikodembartnik]

Hi, you can also pay with paypal or credit card. Go to checkout and continue to the payment panel

[@TTS-TP]

Wife walks in, husbands dragging "dump find" oven into the garage to make powder coat Baker😂

[@ZenoFromTheElea]

6:27 some small insect on MDF near the drill

[@Hpbb87]

Good

[@flytobi7834]

Great job what you are doing! All my respect to you! This channel needs much more subscribers! Everyone: don´t forget to subscribe!

[@AlexanderEresov]

Very interesting! And cute graphics too :)

[@nikodembartnik]

Thank you! 😊

[@mtasapl]

4:50 Please do an audio filter pass on the high frequency stepper motor noise if you're printing in the background, I nearly ran to my workshop next room thinking that something was breaking :D

[@FXQC]

i was doing powder coating in a industrial environment and i get shocked so bad 😂

[@nikodembartnik]

Why?

[@FXQC]

@@nikodembartnik we use big rack who get powder coated and they have so much coat on it that's the ground would not work properly so sometimes you becomes the ground ⚡one guy manage to put the thing on fire 😐 the company I was working for make electronic road sign the one ending by mac ...

[@OwlShadow]

nice

[@c0pyimitati0n]

Bro, why don't you plug a lav mic into the rode and clip it to your shirt or tape it to your chest (my preferred method)

[@RenatoYamamoto481]

we should try to 2d print the gun, looks eeasy

[@james10739]

$109 harbor freight has a kit for $80