DIY Rebar Bottle Opener - Rebar Projects

I Make a Rebar Bottle Opener, a simple project using a scrap bit of rebar left over from other projects.
The Rebar used in this project is 20mm rebar(3/4 inch rebar).
►►Subscribe to our Channel for more videos ►► bit.ly/2ULxLJogavinclark
The main tools used, Angle Grinder with a 6mm grinding wheel, Alpha Cutting Disc, Flap Disc, and Alpha Steel Files
Tools / Supplies, I often use are.
Marking out Tools
Markal Silver-Streak Metal Marker Round: amzn.to/3mTJDHt
Milwaukee 4pk Inkzall Black Ultra Fine Point Pens: amzn.to/2WKKpeE
Milwaukee Inkzall Jobsite Fine Point Black Permanent Marker 12 Pack: amzn.to/3kHrXfo
Locking Pliers - Vise Grips
MILWAUKEE 10” Locking Pliers, Curved Jaw: amzn.to/3zzJH2u
Milwaukee 6" Long Nose Locking Pliers: amzn.to/3jyVLeS
Milwaukee 6” Locking Clamp Regular Jaws: amzn.to/3jB94eI
KNIPEX Tools Long Nose Grip Pliers: amzn.to/3ByD1SP
Magnets
Magnetic V-Pads Kit, Magnets On Both Pad Face & Bottom: amzn.to/3DCya4W
Mini Magnetic Fabrication Square Magnets Angles: 30°, 60°, 45°, 90°: amzn.to/2WN9Fkr
“L” shape Corner Square Magnets 12°, 90° & 60° Angle Setting: amzn.to/2YaZXsU
My camera set-up.
Canon EOS M6 Mark II Camera 15-45mm Lens: amzn.to/3DNnn83
VideoMicro Rode Compact On-Camera Microphone: amzn.to/3QkUBnK
Camera Tripod Vanguard Alta Pro 2: amzn.to/3yB8hP5
The Brand of the Drill bits, and cutting/flap discs, is "Alpha" If you can't get them at your local hardware shop, here is a link to Alpha Tools: alphatools.com.au
As an Amazon Associate, I earn from qualifying purchases. This means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make more videos like this one. Thank you very much for your support!
►►Subscribe to our Channel for more videos ►► bit.ly/2ULxLJogavinclark
Always use all the correct safety gear, and use your tools safely, I am not a good role model for this.
Hope you found something of use in my video or at least found it entertaining.
Gavin Clark DIY

[@howder1951]

Nice, in a few moments I can make one of these for my two sons in law! Thanks for the vid, enjoy the cool one and cheers mate!

[@GavinClarkdiy]

Thank you very much, I wish you the best for your projects, Cheers mate!

[@MrElemonator]

One of my favorite channels. Perhaps you could make a napkin, paper towel, or toilet paper holder.

[@GavinClarkdiy]

Thank you very much, I am glad you like the channel. Thank you for your suggestions, I have made a note of your ideas, thank you I love suggestions.

[@paulbarlow3185]

So simple and yet so effective. You always come up with great ideas. Thanks for posting the video. Cheers👍

[@GavinClarkdiy]

Thank you very much, I appreciate your comment. Cheers Paul.

[@mikekerr3242]

Brilliant, stylish and simple. I'll have a go at this one.

[@GavinClarkdiy]

Thank you very much, I wish you the best for your project.

[@michael7324]

Love these small simple projects.

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@FRANCOMEX1000]

Excellent Gavin. I will make some in my workshop. Just to open some Corona beers and enjoy the French Grand Prix, waiting for Checo to reach the podium

[@GavinClarkdiy]

Thank you very much, I wish you the best for your projects, I hope you have a win, Cheers.

[@henryserrano5272]

Simple and very cool .. enjoy that cold one..

[@GavinClarkdiy]

Thank you very much, I am glad you liked it. Cheers

[@ReloadingMoreAD1966]

🥇🥇Well Done Gavin. Excellent and ingenious as always. 🥇🥇

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@bodean2000]

You are the Rebar Master! You make some really cool stuff.

[@GavinClarkdiy]

Thank you very much, I appreciate your comment.

[@prospectorpete7005]

I love it Gav, will make one for the shed and one for the caravan this weekend.

[@GavinClarkdiy]

Thank you very much, I wish you the best for your projects.

[@celsoguajardovillarreal]

A destapar cervezas !!! Excelente !!! Saludos desde Apodaca Nuevo Leon Mexico.

[@GavinClarkdiy]

Muchas gracias, Saludos desde Australia.

[@markc5593]

Great idea, I love using odd stuff for every day items.

[@GavinClarkdiy]

Thank you very much, I am glad you liked it. It is good to reuse old things and make or repurpose things.

[@earlcavenaugh6459]

Nice work Gavin! I make something similar with rails spikes. Makes cool gifts.

[@GavinClarkdiy]

Thank you very much. Rail spike ones would look great, I also like these simple things as gifts etc. Thank you for your comment Earl.

[@andrewc6385]

Great job mr clark. I love your work.

[@GavinClarkdiy]

Thank you very much.

[@regsparkes6507]

Good and timely idea,.... I'll drink to that!

[@GavinClarkdiy]

Thank you Reg, Cheers mate.

[@homemadetools]

Clever use of rebar. We shared this video on our homemade tools forum this week 😎

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@eliperli3663]

Very practical!!!😁👍

[@GavinClarkdiy]

Thank you very much, I am happy that you liked it.

[@juancarlosrivera7359]

What a good idea, my friend.

[@GavinClarkdiy]

Thank you very much, I am happy that you liked it.

[@MariniProduction2021]

This is amazing 😍 nice project

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@kevinlott9626]

Excellent, Gavin..! I think I'll make 6 or 8 of there, get them powder coated in a bright color and give them out as gifts. BOOM.. instant Christmas presents..🙂!!

[@GavinClarkdiy]

Sounds like a great plan Kevin, thank you for your comment.

[@pritongkandule5835]

or put a hole at the other end so you can hang it or put a string.

[@paullang1961]

good vid Gav cheers mate

[@GavinClarkdiy]

Thank you very much Paul, Cheers mate.

[@supertrooper7403]

Just found your channel Gavin. You are a true craftsman and I appreciate your videos/ideas very much. Take care my friend. Matt in Maryland, USA

[@GavinClarkdiy]

Thank you very much, I appreciate your comment. Greetings from Australia.

[@EiderJChavesC2]

Cool!. Thank you for sharing, my dear friend.

[@GavinClarkdiy]

Not a problem mate, I am glad you liked it.

[@mircomasini9591]

Ciao Clark come sempre bel idea!!! semplice ma allo stesso tempo bello complimenti . Saluti dal🇮🇹

[@GavinClarkdiy]

Grazie mille, sono felice che ti sia piaciuto. Saluti dall'Australia.

[@mr.ranyhomemade2466]

Good idea 👍🏻

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@mr.ranyhomemade2466]

For all your videos was uploaded I never missed

[@lemlem9969]

Very nice

[@GavinClarkdiy]

Thank you very much, I am happy that you liked it.

[@jagdishsarvaiya6651]

Wow..CHEERS .. Mr Gavin Clark !! Please make shape of the bottle opener like a bottle.

[@GavinClarkdiy]

That would look cool, I have made a note, one day I will have a play and see how it goes. Thank you for the idea.

[@jagdishsarvaiya6651]

@@GavinClarkdiy Thank you for your kind and considerate regard for others.

[@GavinClarkdiy]

Thank you very much, I appreciate your comment, I enjoy this stuff, and it is people like you that keep the drive going for me.

[@viorsa8200]

Excelente tutorial maestro , está claro que le gustan las cabillas corrugadas y que les saca mucho partido , un buen abridor rústico , gracias por compartir sus conocimientos , un saludo cordial y por supuesto un gran like desde Narón (Galicia) 🤓 🔝

[@GavinClarkdiy]

Muchas gracias, me alegra que te haya gustado y agradezco tu comentario. Me gusta el aspecto de la barra de refuerzo, ya que es mucho mejor que el acero normal.

[@tips8762]

You are very creative

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@waterboy8999]

Cheers Gavin

[@GavinClarkdiy]

Thank you , Cheers mate

[@kulibinAS.]

Привет с Рассии да это круто так нагонять аппетит. Чтобы глотнуть живительной силы пива. Я пиво старасть с рыбкой, пиво без рыбы деньги на ветер 😁удачи тебе и здоровья. 👍👍👍👍👍🤝

[@GavinClarkdiy]

Большое спасибо, привет из Австралии. Вам тоже удачи и здоровья.

[@kulibinAS.]

@@GavinClarkdiy Спасиво!

[@josueantonioramirezreyes4848]

Muy ingenioso voy hacer unos para mis amigos 👍👍

[@GavinClarkdiy]

Muchas gracias, les deseo lo mejor para sus proyectos.

[@promiscuous5761]

Thank you.

[@GavinClarkdiy]

Thank you very much.

[@douglasfathers4848]

Awesome mate , It takes me 25 minutes to forge a bottle opener . Cheers Gavin . (:

[@GavinClarkdiy]

Thank you very much. Forged stuff has that ancient look and feel, I love forged steel, rebar just does not compete with it in my opinion. Cheers Douglas.

[@chetnarongwonnasomporn8654]

very good

[@GavinClarkdiy]

Thank you very much.

[@josegermir1080]

Desde Córdoba, Argentina

[@GavinClarkdiy]

Muchísimas gracias. Saludos desde Australia.

[@user-lt4st7gd6q]

Шикардос,сделаю другу такой подарок не потеряется,

[@GavinClarkdiy]

Я желаю вам всего наилучшего для вашего проекта.

[@Speido307]

you would be the best neighbor to have!!

[@GavinClarkdiy]

Hahaha, because I am handy or I make a lot of noise? Thank you for your comment.

[@Speido307]

@@GavinClarkdiy yes to both! haha

[@GavinClarkdiy]

Hahahaha

[@koczeka]

cheers, subscribed :D

[@GavinClarkdiy]

Thank you very much, Welcome to the channel.

[@garyjones2582]

Who would have thought that a guy would be making masterpieces from common rebar.. Mr. R, take care my friend...

[@GavinClarkdiy]

Thank you very much Gary, I appreciate your comment. Keep safe.

[@garyjones2582]

@@GavinClarkdiy you too my friend...

[@joec.vargas7541]

saludos amigo, siempre muy ingenioso y útiles tus creaciones 👏👍🙋🇵🇦

[@GavinClarkdiy]

Muchas gracias, agradezco tu comentario.

[@halanaguiar2930]

Um show 👏👏👏👏👏

[@GavinClarkdiy]

Thank you very much.

[@andrewsparks4112]

Drill a hole in one end for the key ring.

[@GavinClarkdiy]

I made this one to stand up, it is a bit big for a key ring, but on a smaller one you idea is spot on, thank you very much Andrew.

[@user-pk4sp4rx2e]

Good morning 🌅

[@GavinClarkdiy]

Good morning to you too.

[@user_DrIvanoff]

Прикольно! Для полной красоты картины можно ещё ручку от велосипеда натянуть 😉👍

[@GavinClarkdiy]

Большое спасибо, я рад, что вам понравилось. Ваше здоровье!

[@StPatrickIrland]

Jajajajaja Excelent!!!

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@miguelarce8284]

Qué buena idea salud!!!

[@GavinClarkdiy]

Muchas gracias, me alegra que te haya gustado.

[@miguelarce8284]

@@GavinClarkdiy En realidad todos tus videos son muy buenos saludos

[@GavinClarkdiy]

@@miguelarce8284 Muchísimas gracias.

[@tikiherama471]

Super

[@GavinClarkdiy]

Thank you.

[@user-mh2fk6qs1q]

Монументальная открывашка!

[@GavinClarkdiy]

Большое спасибо.

[@josegermir1080]

Un gusto sus trabajos. Realmente creativo, ingenioso. El metal una vez pulido.... qué le recubre para que no oxide. Gracias

[@GavinClarkdiy]

A menudo uso Penetrol Rust Treatment Penetrates Rust 300g Aerosol Spray, y luego aplico dos capas finales de Semi-Gloss Clear Coat. Eso es lo que usé en las letras de la barra de refuerzo en la parte posterior de mi banco de trabajo, aquí está el enlace a ese video. kzbin.info/www/bejne/gHKQqJ5sZ7-ans0 Trato de no comentar sobre los acabados, en cuanto al clima en el que se encuentra, es adentro-afuera, mucha lluvia, hielo, quiere a largo plazo y rara vez toca, o una cera con una toallita cada año. Es por eso que no tengo una opinión. Pregúntele a alguien en su área qué debe usar, creo que esta es una mejor manera de averiguar qué es lo mejor para usted. Gracias por tu comentario.

[@GilbertoMartinez55]

Amado Gavin, fou até tomar uma cerveja, já dei Laike

[@GavinClarkdiy]

Muito obrigado, agradeço seu comentário.

[@RKELLEHER40]

Howdy, Brother! Cheers!

[@GavinClarkdiy]

Cheers! mate.

[@troynixon209]

Finally a project within the realm of my abilities!

[@GavinClarkdiy]

You will be on the tough ones in no time, I wish you the best for your project. Have fun Troy.

[@bradleytuckwell4881]

I think they got it wrong it’s not Clark Kent it’s Gavin Clark the man of steel who can make anything from it. I always love your builds and this bottle opener would look great in any man cave

[@GavinClarkdiy]

Thank you very much, I appreciate your comment Bradley, cheers mate!

[@thisisyourcaptainspeaking2259]

Excellent idea, Gavin! Cheers ;)

[@GavinClarkdiy]

Thank you very much, I am glad you liked it. Cheers Captain.

[@claudioroberto7946]

Bacana, muito 👍

[@GavinClarkdiy]

Muito obrigado, fico feliz que tenha gostado.

[@MadDog101]

No, cheers🎉! I fkn like it !

[@GavinClarkdiy]

Awesome, cheers mate and thank you for your comment.

[@adnacraigo6590]

Why don't you slice a thin slot in the end of it to get pull tabs open on cans also?

[@GavinClarkdiy]

That is a very good idea, thank you Adna.

[@chonpiras2815]

chingon

[@GavinClarkdiy]

Thank you very much.

[@vsemvodki]

Еще с монтировки сделал бы😂😂

[@user-yc6kr5rb5v]

Вот вроде простая открывашка, а как сделана. Мастер есть Мастер!

[@erkankoz1678]

🪄 ⚙️🔩🔧🪛 👏👏👏👏👏👏👏

[@raimundooliveira9953]

👍👍👍👍

[@user-fg9do8ot3f]

عالی

[@GavinClarkdiy]

خیلی ممنون، خوشحالم که خوشتون اومد.

[@user-PC_47]

👍 🍻 👍

[@ldiy7031]

👍👍👍

[@GavinClarkdiy]

Thank you.

[@user-jo5qj4pv5x]

Надо ручку подлинее и можно вечером по улицам ходить. А если докапаются полицейские то это просто открывашка 😂😂😂😂

[@GavinClarkdiy]

Хахаха, отличная идея, мне нравится. («Человек арестован за то, что вынес открывалку для бутылок на главную улицу»)

[@cesargomez4520]

Hic!🤤

[@da_Woody]

cheeeeeeers! 👍

[@GavinClarkdiy]

Cheers! Simon.

[@AltF-nr1ii]

🍻👍

[@aleksandrterkin1239]

👍👍✌️😁😁😁

[@GavinClarkdiy]

Thank you very much.

[@koeoo361]

Нужно сделать. А то отвёрткой открываю 😹

[@GavinClarkdiy]

Спасибо. Да много способов открыть их, это делает хороший подарок. Спасибо за ваш комментарий.

[@jago171]

Do you ever use any products to seal the metal after you've finished to prevent any rust? I like the polished rebar look and wondered if you'd had any problems with surface rust? Like on a rebar coat hook if damp coats are hung on it. Thanks

[@GavinClarkdiy]

I often use Penetrol Rust Treatment Penetrates Rust 300g Aerosol Spray, and then put two topcoats of Semi-Gloss Clear Coat. That is what I used on the rebar lettering on the back of my workbench, here is the link to that video. kzbin.info/www/bejne/gHKQqJ5sZ7-ans0 I try not to comment on finishes, As what climate you are in, is it inside-outside, lots of rain, ice, do you want long term and rarely touch, or a wax with a wipe over every year. Thank you for your comment.

[@howder1951]

@@GavinClarkdiy If you want a traditional "blacksmith" finish, just warm it up a bit and wipe it with some beeswax and give it a cloth buff. (just an opinion)

[@padekroczykowski4863]

Rust?

[@GavinClarkdiy]

I use beeswax sometimes, or I often use Penetrol Rust Treatment Penetrates Rust 300g Aerosol Spray, and then put two topcoats of Semi-Gloss Clear Coat. That is what I used on the rebar lettering on the back of my workbench, here is the link to that video. kzbin.info/www/bejne/gHKQqJ5sZ7-ans0 I try not to comment on finishes, As what climate you are in, is it inside-outside, lots of rain, ice, do you want long term and rarely touch, or a wax with a wipe over every year. That is why I have no opinion, Please ask someone in your area what you should use, I feel this is a better way to find out what would be best for you. Thank you for your comment.

[@padekroczykowski4863]

👍@@GavinClarkdiy

[@nicolasgnz5472]

😋🥃🥃🍻🍻🍻

[@user-hr7ly5ux5q]

👍👍👍👍👍✔️✔️✔️✔️❤️

[@GavinClarkdiy]

Thank you very much.

[@user-td9pe9ex7h]

а теперь сделай чтобы не ржавело

[@GavinClarkdiy]

Я согласен на 100%, все мои готовые изделия покрыты чем-то для их защиты.